Laboratory power supplies

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: No

Built-in devices: Multimeter (DMM)

The ITECH IT6721 simple laboratory DC power supply delivers up to 180 W of power at a low cost.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6942A professional laboratory power supply provides stable voltage up to 60 V and current up to 15 A.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6952A professional stabilized LPS provides precise voltage regulation up to 60 V and current up to 25 A at power up to 600 W.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6953A professional laboratory power supply provides a stable voltage of up to 150 V and a current of up to 10 A at a power of up to 600 W.

Number of channels (DC): 3

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

The inexpensive linear galvanically isolated power supply Keithley 2231A-30-3 contains three independent channels with a total power of 195 Watts.

Number of channels (DC): 3

Operating principle: Linear

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The Keithley 2230-30-3 linear laboratory power supply contains three galvanically isolated channels with a minimum level of ripple and a total power of 195 Watts.

Number of channels (DC): 3

Operating principle: Linear

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The Keithley 2230-30-1 laboratory bipolar power supply contains three channels with a linear way to stabilize the output voltage.

Number of channels (DC): 3

Operating principle: Linear

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The Keithley 2230-30-6 linear laboratory power supply contains three galvanically isolated channels with a minimum level of ripple and a total power of 375 Watts.

Number of channels (DC): 3

Operating principle: Linear

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The Keithley 2230-60-3 linear laboratory power supply contains three galvanically isolated channels with a minimum level of ripple and a total power of 375 Watts.

Number of channels (DC): 1

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

Thanks to the linear stabilization method, the ITECH IT6831 model provides a clean output voltage up to 18 V without ripple.

Number of channels (DC): 1

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

Thanks to the linear stabilization method, the ITECH IT6833 model provides a clean output voltage up to 72 V without ripple.

Number of phases (AC): 1

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM), Generator

The ITECH IT-M7722E laboratory AC power source can supply loads up to 300 V (RMS) and up to 7.5 A (RMS) at apparent power up to 750 VA.

Number of phases (AC): 1

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM), Generator

The ITECH IT-M7723 laboratory AC power source has two voltage ranges (300 and 600 V RMS) and two current ranges (12 and 6 A RMS).

Number of phases (AC): 1

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM), Generator

The ITECH IT-M7723E laboratory AC power source can supply loads up to 300 V (RMS) and up to 15 A (RMS) at apparent power up to 1 500 VA.

Number of phases (AC): 1

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM), Generator

The ITECH IT-M7721L laboratory AC power source can supply loads up to 300 V (RMS) and 3 A (RMS) at apparent power up to 300 VA.

Number of phases (AC): 1

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM), Generator

The ITECH IT-M7722D laboratory AC power source can supply loads up to 300 V (RMS) and 3 A (RMS) at apparent power up to 300 VA.

Number of phases (AC): 1

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM), Generator

The ITECH IT-M7723D laboratory AC power source can supply loads up to 300 V (RMS) and 7.5 A (RMS) at apparent power up to 750 VA.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6922A professional stabilized laboratory power supply provides precise voltage regulation up to 60 V and current up to 5 A.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: No

Built-in devices: Multimeter (DMM)

A simple switching type laboratory power supply ITECH IT6720 has very good performance at a low cost.

Number of channels (DC): 2

Operating principle: Linear

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The Keithley 2220-30-1 bipolar laboratory power supply contains two channels with a linear way to stabilize the output voltage.

Number of channels (DC): 1

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

The ITECH IT6821 transformer power supply delivers up to 18 V clean output with minimal ripple.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6932A professional stabilized laboratory power supply provides precise voltage regulation up to 60 V and current up to 10 A.

Number of channels (DC): 2

Operating principle: Linear

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The Keithley 2220G-30-1 laboratory bipolar power supply contains two channels with a linear way to stabilize the output voltage.

Number of channels (DC): 1

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

The ITECH IT6822 transformer power supply delivers clean output up to 32 V with minimal ripple.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6933A professional power supply with current and voltage stabilization provides power up to 200 W at a current of up to 5 A.

Number of channels (DC): 3

Operating principle: Linear

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The Keithley 2230G-30-1 laboratory bipolar power supply contains three channels with a linear way to stabilize the output voltage.

Number of channels (DC): 1

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

The ITECH IT6823 transformer power supply delivers clean output up to 72 V with minimal ripple.

Number of channels (DC): 1

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

Thanks to the linear stabilization method, the ITECH IT6832 model provides a clean output voltage up to 32 V without ripple.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6922B professional laboratory power supply provides stable voltage up to 60 V and current up to 5 A at power up to 100 W.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6932B professional laboratory power supply provides accurate voltage up to 60 V and current up to 10 A at power up to 200 W.

Number of channels (DC): 1

Operating principle: Linear

4-wire sensing: No

Built-in devices: Multimeter (DMM)

Thanks to the linear stabilization method, the ITECH IT6834 model provides a clean output voltage up to 150 V without ripple.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6933B professional power supply provides stable voltage up to 150 V and current up to 5 A at power up to 200 W.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6942B professional laboratory power supply provides accurate voltage up to 60 V and current up to 15 A at power up to 360 W.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6952B professional laboratory power supply provides accurate and stable voltage up to 60 V and current up to 25 A.

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM)

The ITECH IT6953B professional laboratory power supply provides stable voltage up to 150 V and current up to 10 A at power up to 600 W.

Number of phases (AC): 1

Number of channels (DC): 1

Operating principle: Switching

4-wire sensing: Yes

Built-in devices: Multimeter (DMM), Generator

The ITECH IT-M7721 laboratory AC power source can supply loads up to 300 V (RMS) and 3 A (RMS) at apparent power up to 300 VA.