Anritsu products
Tehencom company is the official representative of Anritsu. We offer the full range of Anritsu products, as well as provide service, warranty and post-warranty support.
Anritsu distributor certificate (62 KB)
Anritsu company catalog (in russian) (19 pages; 3 MB)
Anritsu Corporation (www.anritsu.com), founded in 1931, occupies a leading position in the world in the production of measuring equipment for mobile communications (mobile protocol testers, portable analyzers, digital stream generators), microwave equipment (spectrum analyzers, signal synthesizers, microwave wattmeters), testing of optical fiber (reflectometers, testers, dispersion meters) and copper communication lines in telecommunications (Ethernet analyzers, SDH, etc.).
The main production facilities and development laboratories are located in Japan and the USA. Anritsu employs more than 4,000 people. Anritsu has state-of-the-art laboratories and its equipment is sold in more than 90 countries. Anritsu's sales exceed $2,000,000,000.
Below are the most popular models of Anritsu equipment. For prices and delivery times for the entire range of instrumentation, just call us or or write to us at E-mail and we will be happy to answer your questions.
| Model | A photo | Short description |
| Spectrum analyzers of the Anritsu company | ||
| Anritsu MS276xA | 
|
Ultra-Portable Spectrum Analyzers Anritsu MS276xA Frequency: 9 kHz - 32 GHz (model MS2760A-0032), 6 GHz - 32 GHz (MS2762A-0032). Frequency: 9 kHz - 44 GHz (model MS2760A-0044), 6 GHz - 44 GHz (MS2762A-0044). Frequency: 9 kHz - 50 GHz (model MS2760A-0050), 6 GHz - 50 GHz (MS2762A-0050). Frequency: 9 kHz - 70 GHz (model MS2760A-0070), 6 GHz - 70 GHz (MS2762A-0070). Frequency: 9 kHz - 90 GHz (model MS2760A-0090), 6 GHz - 90 GHz (MS2762A-0090). Frequency: 9 kHz - 110 GHz (model MS2760A-0110), 6 GHz - 110 GHz (MS2762A-0110). Frequency: 9 kHz - 145 GHz (model MS2760A-0145), 6 GHz - 145 GHz (MS2762A-0145). Frequency: 9 kHz - 170 GHz (model MS2760A-0170), 6 GHz - 170 GHz (MS2762A-0170). Resolution (RBW): 1 Hz - 3 MHz. Dynamic Range: More than 103 dB or 108 dB. Amplitude: +10 dBm to -136 dBm (eight MS2760A models). Amplitude: 0 dBm to -137 dBm (eight MS2762A models). Amplitude Accuracy: ±0.5 dB (typical up to 170 GHz). Standard measurements: channel power, occupied bandwidth and adjacent channel power ratio (ACPR). Reference frequency input 10 MHz, external trigger input. Interface: USB 3.0. Shock, shock, temperature and humidity resistance: MIL-PRF-28800F Class 3. Weight: 0.255 kg. Dimensions: 155 x 84 x 27 mm. Working temperature: from 0°С to +50°С. Maximum frequencies at minimum size and cost |
| Anritsu MS2850A |
|
1 GHz Demodulation Bandwidth Lab Spectrum Analyzers Anritsu MS2850A Frequency: 9 kHz - 32 GHz (model MS2850A-047). Frequency: 9 kHz - 44.5 GHz (model MS2850A-046). Resolution (RBW): 1 Hz - 10 MHz. Amplitude: +30 dBm to -166 dBm. Amplitude Accuracy: ±0.5 dB (up to 4 GHz). Phase noise at 1 GHz: -123 dBc/Hz (10 kHz offset). Standard: demodulation of signals up to 255 MHz bandwidth. EVM less than 1%. Options: preamplifier, phase noise measurement, noise figure measurement (noise factor), analysis bandwidth 510 MHz, analysis bandwidth 1 GHz, reduction of the second harmonic. Screen 21.3 cm (resolution 1024 x 768). Interfaces: USB, Ethernet, IEEE-488 (GPIB). Weight: 21 kg. Dimensions: 426 x 177 x 390 mm. Working temperature: from +0°С to +45°С. Record bandwidth for signal analysis with digital modulation (5G, etc.) |
| Anritsu MS2840A |
|
Anritsu MS2840A Low Phase Noise Laboratory Spectrum and Signal Analyzers Frequency: 9 kHz - 3.6 GHz (model MS2840A-040). Frequency: 9 kHz - 6 GHz (model MS2840A-041). Frequency: 9 kHz - 26.5 GHz (model MS2840A-044). Frequency: 9 kHz - 44.5 GHz (model MS2840A-046). Resolution (RBW): 1 Hz - 10 MHz. Amplitude: +30 dBm to -166 dBm. Amplitude error: ±0.35 dB (up to 4 GHz). Phase noise at 1 GHz: -123 dBc/Hz (10 kHz offset). Phase noise on 79 GHz (with mixer MA2808A): -100 dBc/Hz (10 kHz offset). Options: preamplifier, phase noise measurement, noise figure (noise factor) measurement, vector modulation signal analysis, analog signal analysis. Screen 21.3 cm (resolution 1024 x 768). Interfaces: USB, Ethernet, IEEE-488 (GPIB). Weight: 15.3 kg. Dimensions: 426 x 177 x 390 mm. Working temperature: from +0°С to +50°С. The best level of phase noise at small offsets from the carrier |
| Anritsu MS2830A |
|
Anritsu MS2830A Laboratory Spectrum and Signal Analyzers Frequency: 9 kHz - 3.6 GHz (model MS2830A-040). Frequency: 9 kHz - 6 GHz (model MS2830A-041). Frequency: 9 kHz - 13.5 GHz (model MS2830A-043). Frequency: 9 kHz - 26.5 GHz (model MS2830A-044). Frequency: 9 kHz - 43 GHz (model MS2830A-045). Resolution (RBW): 1 Hz - 10 MHz (up to 31.25 MHz as an option). Signal analysis bandwidth: 10 MHz; 31.25 MHz; 62.5 MHz; 125 MHz (depending on options). Amplitude: +30 dBm to -153 dBm. Amplitude error: ±0.3 dB. Hardware options: preamplifier, rubidium reference oscillator, vector signal generator, arbitrary waveform generator, BER measurement, low phase noise option, phase noise measurement, noise figure measurement (noise figure), preliminary EMC tests and others (total 22 hardware options). Software Options: generation, demodulation and analysis of wireless communication standards: LTE, GSM/EDGE, W-CDMA/HSPA+, TD-SCDMA, CDMA2000, EV-DO, HSDPA/HSUPA, WiMAX, WLAN (802.11), Bluetooth and others (total 37 software options). Screen 21.3 cm (resolution 1024 x 768). Interfaces: USB, Ethernet, IEEE-488 (GPIB). Weight: 13.5 kg. Dimensions: 426 x 177 x 390 mm. Working temperature: from +5°С to +45°С. High accuracy and speed of measurements at a reasonable price |
| Anritsu MS2690A MS2691A MS2692A | 
|
High Performance Lab Spectrum and Signal Analyzers Anritsu MS2690A, MS2691A, MS2692A Frequency: 50Hz - 6GHz (model MS2690A). Frequency: 50Hz - 13.5GHz (model MS2691A). Frequency: 50Hz - 26.5GHz (model MS2692A). Resolution (RBW): 1 Hz - 31.25 MHz. Signal analysis bandwidth: 31.25 MHz (typical); 62.5 MHz (option); 125 MHz (option). Amplitude: +30 dBm to -155 dBm. Amplitude error: ±0.3 dB. Hardware options: preamplifier, rubidium reference oscillator, vector signal generator (125 MHz - 6 GHz), arbitrary waveform generator, BER measurement, noise figure (noise factor) measurement, preselector disable (bypass), direct digitization of the radio signal to an external disk. Software Options: generation, demodulation and analysis of wireless communication standards: LTE, GSM/EDGE, W-CDMA/HSPA+, TD-SCDMA, CDMA2000, EV-DO, HSDPA/HSUPA, WiMAX, WLAN (802.11), Bluetooth and others (total 37 software options). Screen 21.3 cm (resolution 1024 x 768). Interfaces: USB, Ethernet, IEEE-488 (GPIB). Weight: 13.5 kg. Dimensions: 340 x 200 x 350 mm. Working temperature: from +5°С to +45°С. Maximum specifications and functionality |
| Anritsu MS2090A | 
|
Handheld Spectrum and Signal Analyzers Anritsu MS2090A Frequency: 9 kHz - 9 GHz (model MS2090A-0709). Frequency: 9 kHz - 14 GHz (model MS2090A-0714). Frequency: 9 kHz - 20 GHz (model MS2090A-0720). Frequency: 9 kHz - 26.5 GHz (model MS2090A-0726). Frequency: 9 kHz - 32 GHz (model MS2090A-0732). Frequency: 9 kHz - 43.5 GHz (model MS2090A-0743). Frequency: 9 kHz - 54 GHz (model MS2090A-0754). Resolution (RBW): 1 Hz - 10 MHz. Signal analysis bandwidth: 100 MHz (option). Amplitude: +30 dBm to -164 dBm. Noise: -164 dBm. Amplitude measurement accuracy up to 14 GHz: ±0.5 dB (typical). Built-in preamp over the entire frequency range (for all models). Analysis band real time (option): 20 MHz, 50 MHz or 100 MHz. Standard measurements: Channel Power, Occupied Bandwidth, Adjacent Channel Power Ratio (ACPR), Signal Mask Measurement, RSSI, Time-Frequency Diagram, Direction Finder Mode, etc. Demodulation and Quality Analysis wireless communication standards: 5G and LTE. 25.7 cm impact-resistant touchscreen (1280 x 800 resolution). Operating time from the built-in accumulator: 2 hours. Interfaces: USB3, Ethernet 1G. Weight: up to 5.4 kg. Dimensions: 314 x 235 x 95 mm. Working temperature: from -10°С to +55°С. Maximum spectrum analysis capabilities in a portable package |
| Anritsu MS2720T | 
|
Handheld Spectrum and Signal Analyzers Anritsu MS2720T Frequency: 9 kHz - 9 GHz (model MS2720T-0709). Frequency: 9 kHz - 13 GHz (model MS2720T-0713). Frequency: 9 kHz - 20 GHz (model MS2720T-0720). Frequency: 9 kHz - 32 GHz (model MS2720T-0732). Frequency: 9 kHz - 43 GHz (model MS2720T-0743). Resolution (RBW): 1 Hz - 10 MHz. Signal analysis bandwidth: 20 MHz (option). Amplitude: +30 dBm to -163 dBm. Noise: -163 dBm. Built-in preamp over the entire frequency range (for all models). Function of detection of short impulse signals (in a standard complete set). Standard measurements: field strength, occupied bandwidth, channel power, adjacent channel power ratio (ACPR), signal mask measurement, carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: tracking generator, Atomic Reference Oscillator, Channel Scanner, Transient and Interference Analysis, Mapping of Coverage Areas, Power Measurement with Sensors, IF Output (30 MHz Bandwidth), Sweep, I/Q Capture, GPS Receiver, AM/Analyzer FM/PM, etc. Demodulation and Quality Analysis wireless communication standards: GSM/GPRS/EDGE, W-CDMA/HSPA+, LTE/LTE-A FDD/TDD, CDMA/EV-DO, WiMAX Fixed/Mobile, TD-SCDMA. 21.3 cm touchscreen (800 x 600 resolution). User interface: in Russian. Operating time from built-in battery: 3 hours. Interfaces: USB, Ethernet. Weight: up to 4.4 kg. Dimensions: 315 x 211 x 77 mm. Working temperature: from -10°С to +55°С. Combination of portability and maximum performance |
| Anritsu MS2712E MS2713E |
|
Portable spectrum analyzers Anritsu MS2712E, MS2713E Frequency: 9 kHz - 4 GHz (model MS2712E). Frequency: 9 kHz - 6 GHz (model MS2713E). Resolution (RBW): 1 Hz - 3 MHz. Amplitude: +26 dBm to -162 dBm. Built-in preamplifier (standard). Noise: -162 dBm. Bandwidth (RBW) support 200 Hz, 9 kHz, 120 kHz with quasi-peak detector for preliminary EMC and EMI tests. Standard measurements: spectrum and signal analysis, field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: tracking generator, 2-port frequency response analysis, channel scanner, non-stationary signal and interference analysis, mapping of coverage areas on a map, supplying constant voltage to the central core, power measurement using sensors, GPS receiver, PIM detection, AM/FM/PM analyzer, etc. . Demodulation and Quality Analysis wireless communication standards: LTE, GSM/EDGE, W-CDMA/HSPA+, TD-SCDMA, CDMA, EV-DO, Fixed and Mobile WiMAX, ISDB-T, DVB-T/H. Comfortable touch screen. User Interface Russified. Interfaces: USB standard, Ethernet (optional). Operating temperature range: from -10°С to +55°С. Weight: 3.5 kg. Excellent performance, portability and low price |
| Anritsu Site Master S332E, S362E |
|
Portable spectrum analyzers, AFU, cables and antennas Anritsu S332E, S362E Spectrum analyzer: 9 kHz - 4 GHz+ AFA analyzer: 2 MHz - 4 GHz (model S332E). Spectrum analyzer: 9 kHz - 6 GHz+ AFA analyzer: 2 MHz - 6 GHz (model S362E). Resolution (RBW): 10 Hz - 3 MHz. Amplitude: +26 dBm to -162 dBm. Built-in preamplifier (standard). Noise: -162 dBm. Standard Spectrum Measurements: field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Standard AFA measurements: SWR, return loss, distance to fault (in SWR and return loss), cable loss, Smith chart, etc. Additional options: 2-port frequency response analysis, channel scanner, analysis of non-stationary signals and interference, plotting coverage areas on a map, supplying constant voltage to the central core, power measurement using sensors, GPS receiver. Comfortable touch screen. User Interface Russified. Interfaces: USB standard, Ethernet (optional). Weight: 3.7 kg. Dimensions: 273 x 199 x 91 mm. Working temperature: from -10°С to +55°С. The legendary range of handheld spectrum analyzers and AFAs |
| Anritsu Cell Master MT8212E MT8213E |
Product code: 1000011 |
Base Station Portable Analyzers MT8212E, MT8213E Frequency: 100 kHz - 4 or 6 GHz. Resolution (RBW): 10 Hz - 3 MHz. Amplitude: +26 dBm to -157 dBm. Noise: -157 dBm. Bandwidth support (RBW) 200 Hz, 9 kHz, 120 kHz with quasi-peak detector. Contains a built-in analyzer AFU (2 MHz - 4 or 6 GHz). Contains built-in power meter (10 MHz - 4 or 6 GHz). 3G demodulation and analysis options to test base stations. Measurements: spectrum analysis, signal analysis, transient analysis, tracking generator, channel scanner, field strength, signal/noise, bandwidth, ACPR, power, Smith chart, SWR, distance to discontinuity, 2-port frequency response analysis, etc. |
| Anritsu LMR Master S412E |
Product code: 1000012 |
Anritsu S412E Handheld Trunking System Analyzer Frequency: 9 kHz - 1.6 GHz. Range extension option up to 6 GHz. Resolution (RBW): 10 Hz - 3 MHz. Amplitude: +26 dBm to -157 dBm. Built-in preamp over the entire frequency range. Built-in vector analyzer 500 kHz - 1.6 GHz with extension up to 6 GHz. Built-in oscillator 500 kHz - 1.6 GHz with amplitude from 0 to -130 dBm. Built-in narrowband PM analyzer and power meter 10 MHz - 1.6 GHz. Special measurements (option): P25/P25p2, TETRA, NXDN, dPMR, DMR, PTC and LTE. 21.3 cm touchscreen (800 x 600 resolution). User interface: in Russian. Operating time from the built-in accumulator: 3,6 hours. Interfaces: USB, Ethernet. Weight: 3.6 kg. Dimensions: 273 x 199 x 91 mm. Working temperature: from -10°С to +55°С. Everything you need for land mobile radio systems |
| Anritsu MX280007A | 
Product code: 1000013 |
Anritsu MX280007A Mobile Interference Detection System Frequency: 9 kHz - 54 GHz (depending on analyzer model). Designed for driving tests. Compatible with any car. Fully automatic search for single and multiple sources. Operated by one person (driver-operator). Uses an omnidirectional antenna, an Anritsu handheld spectrum analyzer and a Windows compatible tablet or laptop that displays an interactive map with measurement results and directions to follow. In conditions of dense urban development, it correctly processes multipath and reflected signals, as well as dead zones. Can be remotely connected to stationary spectral monitors. A simple and affordable solution to quickly find sources of interference |
| Anritsu MS27101A MS27102A MS27103A | 
|
Anritsu MS2710xA Series Remote Spectrum Analyzers Frequency: 9 kHz - 6 GHz. one RF input (model MS27101A). 1 or 2 RF inputs, outdoor version IP67 (model MS27102A). 12 or 24 RF inputs (model MS27103A). Resolution (RBW): 10 Hz - 3 MHz. FFT bandwidth: 20 MHz (instantaneous analysis). Amplitude: +30 dBm to -152 dBm. Noise: -152 dBm. Built-in preamp. Scan speed: up to 24 GHz/s. Built-in GPS receiver. Optimized for remote control. Power consumption: less than 11W. Interfaces: Gigabit Ethernet. Weight: 2.8 to 6.9 kg (varies by model). Working temperature: from 0°С to +50°С (model MS27101A). Working temperature: from -40°С to +55°С (models MS27102A and MS27103A). An excellent choice for 24/7 remote spectrum monitoring |
| Vector network analyzers of the Anritsu company | ||
| Anritsu ShockLine MS46122A | 
Product code: 1000099 |
Compact, Economical Anritsu MS46122A Vector Network Analyzers Frequency: 1 MHz - 8 GHz (model MS46122A-010). Frequency: 1 MHz - 20 GHz (model MS46122A-020). Frequency: 1 MHz - 40 GHz (model MS46122A-040). Number of ports: 2. Measured parameters: S11, S21, S22, S12 and any combination of a1, a2, b1, b2, 1. Measurement speed: 220 µs per point. Resolution: up to 16,001 dots. Dynamic range: more than 100 dB. Source power: -3 dBm or -20 dBm. Receiver linearity: up to +5 dBm compression point at 40 GHz. Directionality, source matching and load matching: up to 42 dB (with manual calibration) and up to 59 dB (using the AutoCal module). Control via USB from a computer with Windows 7 or 8 (64 bit). Weight: 2.2 kg. Dimensions: 61 x 328 x 197 mm. Working temperature: from 0°С to +50°С. The most cost-effective complete 2-port vector analyzer |
| Anritsu ShockLine MS46322A | 
Product code: 1000102 |
Anritsu MS46322A Vector Network Analyzers Frequency: 1 MHz - 4 GHz (model MS46322A-004). Frequency: 1 MHz - 8 GHz (model MS46322A-010). Frequency: 1 MHz - 14 GHz (model MS46322A-014). Frequency: 1 MHz - 20 GHz (model MS46322A-020). Frequency: 1 MHz - 30 GHz (model MS46322A-030). Frequency: 1 MHz - 43.5 GHz (model MS46322A-040). Number of ports: 2. Measured parameters: S11, S21, S22, S12 and any combination of a1, a2, b1, b2, 1. Measurement speed: 220 µs per point. Resolution: up to 16,001 dots. Dynamic range: more than 100 dB. Source power: -3 dBm or -20 dBm. Receiver linearity: up to +5 dBm compression point at 40 GHz. Directionality, source matching and load matching: up to 42 dB (with manual calibration) and up to 59 dB (using the AutoCal module). Embedded computer based on Intel Core i5 processor. Interfaces: Gigabit Ethernet. Weight: 11 kg. Dimensions: 108 x 484 x 590 mm. Working temperature: from 0°С to +50°С. Inexpensive, accurate and functional vector analyzer |
| Anritsu ShockLine MS46524B | 
Product code: 1000103 |
Anritsu MS46524B 4-Port Professional Vector Network Analyzers Frequency: 50 kHz - 8.5 GHz (model MS46524B-010). Frequency: 50 kHz - 20 GHz (model MS46524B-020). Frequency: 50 kHz - 43.5 GHz (model MS46524B-040). Number of ports: 4. Measured parameters: S11, S12, S13, S14, S21, S22, S23, S24, S31, S32, S33, S34, S41, S42, S43, S44, etc. Measurement speed: 30 µs per point. Resolution: up to 20,001 dots. Dynamic range: up to 140 dB. Source power: -30 dBm to +15 dBm. Receiver linearity: up to +15 dBm compression point at 43.5 GHz. Directionality, source matching and load matching: up to 42 dB (for SmartCal module and manual calibration) and up to 50 dB (for AutoCal module). Embedded computer based on Intel Core i5 processor. Interfaces: 1G Ethernet, USB 3.0. Weight: 15.9 kg. Dimensions: 445 x 152 x 442 mm. Working temperature: from 0°С to +50°С. Professional 4-port vector analyzer with auto-calibration |
| Anritsu VectorStar MS4642B MS4644B MS4645B MS4647B |
Product code: 1000104 |
Anritsu MS4640B Vector Network Analyzers (VectorStar Series) Frequency: 10 MHz - 20 GHz (model MS4642B). Frequency: 10 MHz - 40 GHz (model MS4644B). Frequency: 10 MHz - 50 GHz (model MS4645B). Frequency: 10 MHz - 70 GHz (model MS4647B). Frequency: 70 kHz - 110 GHz (model ME7838E). Frequency: 70 kHz - 145 GHz (model ME7838D). Lower frequency extension from 70 kHz (option MS4640B-070). Number of ports: 2. Expansion up to 4 ports with measuring unit MN469xC. Measured parameters: S11, S21, S22, S12 and any combination of a1, a2, b1, b2, 1. Measurement speed: 20 µs per point. Resolution: up to 100,000 dots. Dynamic range: more than 140 dB. Source power: up to +14 dBm. Receiver linearity: up to +15 dBm compression point at 70 GHz. Parameters of directivity, matching in the source and matching in the load: up to 50 dB. Calibration: automatic (using an external module) or manual. Time Domain Analysis (Option MS4640B-002). Noise Figure Measurement (Option MS4640B-041). Pulse measurements (option MS4640B-042). Differential measurements (option MS4640B-043). Operating system Windows 7. Interfaces: USB, Ethernet, IEEE-488.2 (GPIB). Weight: 30 kg. Dimensions: 286 x 487 x 591 mm. Working temperature: from 0°С to +50°С. Maximum functionality, accuracy and speed of measurements |
| Anritsu VNA Master MS2026C MS2027C MS2028C MS2036C MS2037C MS2038C |
|
Anritsu VNA Master Handheld Vector Network Analyzers with Spectrum Analyzer (MS203xC) and without Spectrum Analyzer (MS202xC) Frequency: 5 kHz - 6 GHz (model MS2026C). Frequency: 5 kHz - 15 GHz (model MS2027C). Frequency: 5 kHz - 20 GHz (model MS2028C). Frequency: 5 kHz - 6 GHz plus spectrum analyzer 9 kHz - 9 GHz (model MS2036C). Frequency: 5 kHz - 15 GHz plus spectrum analyzer 9 kHz - 15 GHz (model MS2037C). Frequency: 5 kHz - 20 GHz plus spectrum analyzer 9 kHz - 20 GHz (model MS2038C). Number of ports of the vector network analyzer: 2. Measured parameters: S11, S21, S22, S12. Measurement speed: 350 µs per point. Resolution: up to 4,001 dots. Dynamic range: more than 100 dB. Source power: +3 dBm, -3 dBm or -25 dBm. Parameters of directivity, matching in the source and matching in the load: up to 42 dB. Calibration: manual (using calibration loads). Spectrum analyzer: RBW (1 Hz - 10 MHz), amplitude (up to +30 dBm), noise (up to -161 dBm). Battery life from built-in battery: 3 hours. Weight of MS202xC models: 4.5 kg. Dimensions: 211 x 315 x 78 mm. Weight of MS203xC models: 4.8 kg. Dimensions: 211 x 315 x 97 mm. Screen 21.3 cm (800 x 600). Interfaces: USB, Ethernet. Working temp.: from -10°С to +55°С. Great handheld professional grade vector analyzer |
| Anritsu VNA Master MS2024B MS2025B MS2034B MS2035B |
|
Anritsu VNA Master Handheld Vector Network Analyzers (MS20xxB Series) Frequency: 500 kHz - 4 GHz (model MS2024B). Frequency: 500 kHz - 6 GHz (model MS2025B). Frequency: 500 kHz - 4 GHz plus spectrum analyzer 9 kHz - 4 GHz (model MS2034B). Frequency: 500 kHz - 6 GHz plus spectrum analyzer 9 kHz - 6 GHz (model MS2035B). Number of ports of the vector network analyzer: 2. Measured parameters: S11, S21. Measurement speed: 850 µs per point. Resolution: up to 4,001 dots. Dynamic range: more than 100 dB. Source power: +3 dBm, -5 dBm or -25 dBm. Parameters of directivity, matching in the source and matching in the load: up to 42 dB. Calibration: manual (using calibration loads). 21.3 cm touchscreen (800 x 600 resolution). Interfaces: USB standard, Ethernet (optional). Battery life from built-in battery: 3.6 hours. Weight: 3.5 kg. Dimensions: 199 x 273 x 91 mm. Working temperature: from -10°С to +55°С. The best entry-level handheld vector analyzer |
| Anritsu Site Master S820E |
Product code: 1000101 |
Portable analyzer of AFU, waveguides, cables and antennas Anritsu S820E Frequency: 1 MHz - 8 GHz (Model S820E-0708 with N(f) connectors). Frequency: 1 MHz - 14 GHz (Model S820E-0714 with N(f) connectors). Frequency: 1 MHz - 20 GHz (Model S820E-0720 with reinforced K(m) connectors). Frequency: 1 MHz - 30 GHz (Model S820E-0730 with reinforced K(m) connectors). Frequency: 1 MHz - 40 GHz (Model S820E-0740 with reinforced K(m) connectors). Measurement speed: 650 µs per point. Dynamic range: 100 dB. Measurements (1 port): SWR, return loss (return loss), distance to fault (by SWR and return loss), cable loss, phase, Smith chart. Measurements (2 ports): transfer characteristic, cable loss. Calibration modes: coaxial (OSL, TOSL) and waveguide (SSL, SSLT). Vector network analyzer (Option S820E-0440): Measure S11, S21, S22, S12. Vector Voltmeter (Option S820E-0441): A/B and B/A ratio measurement. High precision power meter (requires MA241xxA series external sensor). 21.3 cm touchscreen (800 x 600 resolution). Interfaces: USB, Ethernet. Battery life from built-in battery: 6 hours. Weight: 3 kg. Dimensions: 273 x 199 x 91 mm. Working temperature: from -10°С to +55°С. The best portable solution for DAF and waveguide testing up to 40 GHz |
| Anritsu Site Master S331E, S361E, S332E, S362E |
|
Portable analyzers of AFU, cables, antennas and radio spectrum Anritsu S331E, S361E, S332E, S362E (Sitemaster) AFA analyzer: 2 MHz - 4 GHz (model S331E). AFA analyzer: 2 MHz - 6 GHz (model S361E). AFA analyzer: 2 MHz - 4 GHz+ spectrum analyzer: 9 kHz - 4 GHz (model S332E). AFA analyzer: 2 MHz - 6 GHz+ spectrum analyzer: 9 kHz - 6 GHz (model S362E). Standard AFA measurements: SWR, return loss, distance to fault (in SWR and return loss), cable loss, Smith chart, etc. Standard Spectrum Measurements: field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: 2-port frequency response analysis, channel scanner, analysis of non-stationary signals and interference, plotting coverage areas on a map, supplying constant voltage to the central core, power measurement using sensors, GPS receiver. Convenient touch screen. User Interface Russified. Interfaces: USB standard, Ethernet (optional). Weight: 3.7 kg. Dimensions: 273 x 199 x 91 mm. Working temperature: from -10°С to +55°С. The legendary series of portable AFU and radio spectrum analyzers |
| Anritsu LMR Master S412E |
Product code: 1000012 |
Handheld Trunking System Analyzer (P25, NXDN, TETRA) Anritsu S412E Frequency: 500 kHz - 1.6 or 6 GHz. Resolution (RBW): 10 Hz - 3 MHz. Amplitude: +26 dBm to -120 dBm. Noise: -150 dBm. Bandwidth support (RBW) 200 Hz, 9 kHz, 120 kHz with quasi-peak detector. Contains vector analyzer S11, S21 (500 kHz - 1.6 or 6 GHz). Measurements: specialized measurements P25, NXDN, TETRA, spectrum and signal analysis, transient analysis, channel scanner, field strength, signal/noise, bandwidth, ACPR, power, 2-port frequency response analysis, demodulation and analysis of AM and FM signals, GPS receiver, etc. |
| High frequency signal generators of the Anritsu company | ||
| Anritsu MG362x1A |
|
RF/Microwave signal generators Anritsu MG362x1A Frequency: 9 kHz – 20 GHz (model MG36221A). Frequency: 9 kHz – 43.5 GHz (model MG36241A). Frequency: 9 kHz – 70 GHz (model MG36271A). Output power (with options 2 and 15): -120 dBm to +30 dBm. Amplitude error: ±1 dB (up to 40 GHz), ±1.5 dB (up to 70 GHz). Phase noise at 10 GHz (with option 13): -132 dBc/Hz (100 kHz offset). Modulation (with options 12 and 26): AM, FM, PM, IM. Built-in attenuator (option 2). Built-in function and pulse generator (option 27). Screen: graphic. Interfaces: Ethernet, USB, IEEE-488 (GPIB). Weight: 20.5 kg. Dimensions: 483 x 133 x 552 mm. Operating temperature: from 0°С to +50°С. A universal series of generators with excellent characteristics |
| Anritsu MG3740A |
Product code: 1000157 |
High Frequency Signal Generators Anritsu MG3740A Frequency: 100 kHz - 2.7 GHz (model MG3740A-032). Frequency: 100 kHz - 4 GHz (model MG3740A-034). Frequency: 100 kHz - 6 GHz (model MG3740A-036). Second RF output: 2.7 GHz (Option 62), 4 GHz (Option 64), 6 GHz (Option 66). Output power (with options 41 and 42): -144 dBm to +30 dBm. Amplitude Accuracy: ±0.5 dB (up to 3 GHz), ±0.8 dB (above 3 GHz). Reverse protection (option 43). Phase noise at 1 GHz: -131 dBc/Hz (20 kHz offset). Analog modulation from an internal source: AM, FM, FM, IM. External analog modulation input (option 50). Digital modulation 2 MHz (option 20). Screen: 21.3 cm (1024 x 768 resolution). Interfaces: Ethernet, USB, IEEE-488 (GPIB). Weight: 17 kg. Dimensions: 426 x 177 x 390 mm. Working temperature: from +5°С to +45°С. Generating clean signals with minimal phase noise |
| Microwave wattmeters and radio signal power sensors of the Anritsu company | ||
| Anritsu ML2495A ML2496A | 
Product code: 1000166 |
Anritsu ML2490A Series Pulsed, Modulated and Stationary RF Power Meters Number of channels: 1 (Model ML2495A) or 2 (model ML2496A). Frequency: 100 kHz - 65 GHz (depending on the sensor). Bandwidth (video bandwidth): 65 MHz. Typical rise time: 8 ns (with MA2411B encoder). Time resolution: 1 ns. Built-in power calibrator (50 MHz and 1 GHz). Ideal for radar applications and wireless networks (4G and 5G). Power measurements: Average, Min, Max, Peak, Crest, PAE (Power Added Efficiency). 8.9 cm screen (320 x 240 resolution). Interfaces: Ethernet, IEEE-488 (GPIB), RS-232. Weight: 3 kg. Dimensions: 213 x 88 x 390 mm. Working temperature: from 0°С to +50°С. Accurate measurement of the power of any radio signal |
| Anritsu ML2487B ML2488B | 
Product code: 1000167 |
ML2480B Wideband Microwave Power Meters Number of channels: 1 (Model ML2487B) or 2 (model ML2488B). Frequency: 100 kHz - 65 GHz (depending on the sensor). Bandwidth (video bandwidth): 20 MHz. Dynamic Range: -70 dBm to +20 dBm. Rise time: less than 18 ns. Ideal for accurate power measurements in GSM, WCDMA, CDMA, Bluetooth, IEEE 802.11 WLAN (WiFi), WiMAX and similar systems. Possibility of remote control. Built-in power calibrator. |
| Anritsu ML2437A ML2438A | 
Product code: 1000168 |
ML2430A Series Continuous Microwave Power Meters Number of channels: 1 (model ML2437A) or 2 (model ML2438A). Frequency: 100 kHz - 65 GHz (depending on the sensor). Bandwidth (video bandwidth): 100 kHz. Dynamic Range: -70 dBm to +20 dBm. Inexpensive. Ideal for accurately measuring the power of stationary or slowly changing signals in both the lab and production. Possibility of remote control. Built-in power calibrator. |
| Anritsu MA2411B |
Product code: 1000169 |
Anritsu MA2411B pulsed microwave power sensor Frequency: 300 MHz - 40 GHz. Video bandwidth: 50 MHz. Dynamic Range: -20dBm to +20dBm. SWR: 1.15 to 1.5 (depending on frequency). rise time: less 8 ns. Linearity: 4.5% to 7% (depending on frequency). Connector: K(m). Ideal for use with pulsed power meters Anritsu ML2490A. |
| Anritsu MA2490A MA2491A |
Product code: 1000170 |
Broadband microwave power sensors Anritsu MA2490A, MA2491A Frequency: 50 MHz - 8 GHz (model MA2490A). Frequency: 50 MHz - 18 GHz (model MA2491A). Video bandwidth: 20 MHz. Dynamic Range: -60dBm to +20dBm. SWR: 1.17 to 1.25 (depending on frequency). Rise time: less than 18 ns. Linearity: 3.5% to 7% (depending on frequency). Connector: N(m). Ideal for measuring the peak and average power of radar and telecommunications signals (WiMAX, WCDMA, WLAN, GSM, etc.). |
| Anritsu MA2442D MA2444D MA2445D |
Product code: 1000171 |
High-precision diode microwave power sensors Anritsu MA2442D, MA2444D, MA2445D Frequency: 10 MHz - 18 GHz (model MA2442D). Frequency: 10 MHz - 40 GHz (model MA2444D). Frequency: 10 MHz - 50 GHz (model MA2445D). Video bandwidth: 100 kHz. Dynamic Range: -67dBm to +20dBm. SWR: 1.08 to 1.5 (depending on frequency). Rise time: less than 4 µs. Linearity: 1.8% to 3.5% (depending on frequency). Connector: up to 18 GHz - N(m), up to 40 GHz - K(m), up to 50 GHz - V(m). Built-in 3dB attenuator to minimize SWR. Ideal for high precision measurements. |
| Anritsu MA2472D MA2473D MA2474D MA2475D |
Product code: 1000172 |
Standard diode microwave power sensors Anritsu MA2472D, MA2473D, MA2474D, MA2475D Frequency: 10 MHz - 18 GHz (model MA2472D). Frequency: 10 MHz - 32 GHz (model MA2473D). Frequency: 10 MHz - 40 GHz (model MA2474D). Frequency: 10 MHz - 50 GHz (model MA2475D). Video bandwidth: 100 kHz. Dynamic Range: -70dBm to +20dBm. SWR: 1.12 to 1.63 (depending on frequency). Rise time: less than 4 µs. Linearity: 1.8% to 3.5% (depending on frequency). Connector: up to 18 GHz - N(m), up to 32 and 40 GHz - K(m), up to 50 GHz - V(m). Optimally suited for measurements in a wide range of power stationary and TDMA signals (GSM, etc.). |
| Anritsu MA24002A MA24004A MA24005A |
Product code: 1000173 |
Microwave power thermal sensors Anritsu MA24002A, MA24004A, MA24005A Frequency: 10 MHz - 18 GHz (model MA24002A). Frequency: 10 MHz - 40 GHz (model MA24004A). Frequency: 10 MHz - 50 GHz (model MA24005A). Video bandwidth: 0. Dynamic Range: -30dBm to +20dBm. SWR: 1.1 to 1.4 (depending on frequency). rise time: less 15 ms. Linearity: 1.8% to 2.5% (depending on frequency). Connector: up to 18 GHz - N(m), up to 40 GHz - K(m), up to 50 GHz - V(m). Ideal for RMS power measurements on all types of signals. |
| Anritsu MA2481D MA2482D |
Product code: 1000174 |
Universal medium microwave power sensors Anritsu MA2481D, MA2482D Frequency: 10 MHz - 6 GHz (model MA2481D). Frequency: 10 MHz - 18 GHz (model MA2482D). Video bandwidth: 0. Dynamic Range: -60dBm to +20dBm. SWR: 1.12 to 1.25 (depending on frequency). Rise time: less than 4 µs (only with option 1). Linearity: 1.8% to 3.5% (depending on frequency). Connector: N(m). Ideal for measuring the average power of stationary and modulated signals (3G, 4G, OFDM, etc.). Option 1 adds the ability to measure TDMA signals. |
| Anritsu MA24108A MA24118A MA24126A |
Product code: 1000175 |
Accurate USB microwave power sensors Anritsu MA24108A, MA24118A, MA24126A Frequency: 10 MHz - 8 GHz (model MA24108A). Frequency: 10 MHz - 18 GHz (model MA24118A). Frequency: 10 MHz - 26 GHz (model MA24126A). Video bandwidth: 50 kHz. Dynamic Range: -40dBm to +20dBm. SWR: 1.12 to 1.35 (depending on frequency). Rise time: less than 8 µs. Measurement error: 3% to 4% (depending on frequency). Connector: up to 8 and 18 GHz - N(m), up to 26 GHz - K(m). Ideal for measuring the average power of stationary, multitone and modulated signals (3G, 4G, OFDM, etc.). Internal and external auto trigger for measuring the power of TDMA signals. Can be connected to portable devices Anritsu or to the USB port of the computer (the free program is used for control PowerXpert). |
| Anritsu MA24106A |
Product code: 1000176 |
Precise USB Microwave Power RMS Sensor Anritsu MA24106A Frequency: 50 MHz - 6 GHz. Video bandwidth: 100 Hz. Dynamic Range: -40dBm to +23dBm. SWR: 1.1 to 1.2 (depending on frequency). Speed: 10 measurements per second. Linearity: 3%. Connector: N(m). Ideal for measuring the root mean square (RMS - RMS) power of stationary and modulated signals (3G, 4G, OFDM, etc.). Can be connected to portable devices Anritsu or to the USB port of the computer (the free program is used for control powermeter). |
| Anritsu MA24104A |
Product code: 1000177 |
USB passthrough microwave power sensor Anritsu MA24104A Frequency: 600 MHz - 4 GHz. Video bandwidth: 100 Hz. Dynamic Range: +3dBm (2mW) to +52dBm (150W). Input Return Loss: >29.5 dB (up to 3 GHz), >26.5 dB (up to 4 GHz). Measurement error: 3.8%. Connectors: N(f). Ideal for measuring throughput RMS (RMS) power of stationary and modulated signals (3G, 4G, OFDM, etc.). Can be connected to portable devices Anritsu or to the USB port of the computer (the free program is used for control powermeter). |
| Anritsu PSN50 |
Product code: 1000178 |
Precise RMS Microwave Power Sensor Anritsu PSN50 Frequency: 50 MHz - 6 GHz. Video bandwidth: 100 Hz. Dynamic Range: -30dBm to +20dBm. SWR: 1.1 to 1.2 (depending on frequency). Linearity: 3%. Connector: N(m). Connects to portable devices Anritsu ( S331E, MS2712E and etc.). Ideal for measuring the root mean square (RMS - RMS) power of stationary and modulated signals (3G, 4G, OFDM, etc.). |
| Devices for mobile and wireless communication of the Anritsu company | ||
| Anritsu MX280007A |
Product code: 1000013 |
Anritsu MX280007A Mobile Interference Detection System Frequency: 9 kHz - 54 GHz (depending on analyzer model). Designed for driving tests. Compatible with any car. Fully automatic search for single and multiple sources. Operated by one person (driver-operator). Uses an omnidirectional antenna, an Anritsu handheld spectrum analyzer and a Windows compatible tablet or laptop that displays an interactive map with measurement results and directions to follow. In conditions of dense urban development, it correctly processes multipath and reflected signals, as well as dead zones. Can be remotely connected to stationary spectral monitors. A simple and affordable solution to quickly find sources of interference |
| Anritsu Site Master S331E, S361E, S332E, S362E |
|
Portable analyzers of AFU, cables, antennas and radio spectrum Anritsu S331E, S361E, S332E, S362E (Sitemaster) AFA analyzer: 2 MHz - 4 GHz (model S331E). AFA analyzer: 2 MHz - 6 GHz (model S361E). AFA analyzer: 2 MHz - 4 GHz+ spectrum analyzer: 9 kHz - 4 GHz (model S332E). AFA analyzer: 2 MHz - 6 GHz+ spectrum analyzer: 9 kHz - 6 GHz (model S362E). Occupies 60% of the global market meters of antenna-feeder devices. Standard AFA measurements: SWR, return loss, distance to fault (in SWR and return loss), cable loss, Smith chart, etc. Standard Spectrum Measurements: field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: 2-port frequency response analysis, channel scanner, analysis of non-stationary signals and interference, plotting coverage areas on a map, supplying constant voltage to the central core, power measurement using sensors, GPS receiver. Convenient touch screen. User Interface Russified. Interfaces: USB standard, Ethernet (optional). Weight: 3.7 kg. Dimensions: 273 x 199 x 91 mm. Working temperature: from -10°С to +55°С. The legendary series of portable AFU and radio spectrum analyzers |
| Anritsu Site Master S331L |
Product code: 1000181 |
Anritsu S331L Portable AFU, Cable and Antenna Analyzer Frequency: 2 MHz - 4 GHz (AFU analyzer). Frequency: 50 MHz - 4 GHz (built-in power meter). Measurements: SWR, return loss (return loss), distance to fault (by SWR and return loss), cable loss, microwave power measurement, etc. Standard built-in InstaCal calibrator and microwave power meter. Shock, dust and splash proof housing. Battery life from built-in battery: more than 8 hours. 17.8 cm touchscreen (800 x 480 resolution). Interfaces: USB, Ethernet (option). Weight: 2 kg. Dimensions: 250 x 177 x 61 mm. Working temperature: from -10°С to +55°С. Inexpensive, small, contains everything you need to get the job done |
| Anritsu PIM Master MW82119B |
Product code: 1000182 |
Anritsu MW82119B Portable Passive Intermodulation Analyzer (PIM) Frequency: 698 MHz - 806 MHz for LTE 700 (Model MW82119B-0700) Frequency: 710 MHz - 845 MHz for APT 700 (Model MW82119B-0701) Frequency: 791 MHz - 862 MHz for LTE 800 (Model MW82119B-0800) Frequency: 824 MHz - 894 MHz for Cellular 850 (Model MW82119B-0850) Frequency: 880 MHz - 960 MHz for E-GSM 900 (Model MW82119B-0900) Frequency: 885 MHz - 1920 MHz for E-GSM 900 with IM 2 (Model MW82119B-0902) Frequency: 1710 MHz - 1880 MHz for DCS 1800 (Model MW82119B-0180) Frequency: 1710 MHz - 2155 MHz for PCS/AWS 1900/2100 (Model MW82119B-0194) Frequency: 1920 MHz - 2170 MHz for UMTS 2100 (Model MW82119B-0210) Frequency: 2500 MHz - 2690 MHz for LTE 2600 (model MW82119B-0260) Measurement of the passive intermodulation level. Measurement of the distance to the source of passive intermodulation inside the feeder and outside the antenna (over the air). AFA analyzer in the range of 2 MHz - 3 GHz (option 331). Power measurement with external sensors (option 19). More than 3 hours of work from the built-in rechargeable battery. 21.3 cm touchscreen (800 x 600 resolution). Interfaces: USB, Ethernet. Working temperature: from -10°С to +55°С. Dust and splash protection during operation according to IP54. Weight: 9.2 - 12.4 kg (varies by model). Dimensions: 350 x 314 x 152 mm. Finding and Eliminating PIM Sources to Optimize 3G, 4G and 5G Networks |
| Anritsu Site Master S331P |
Product code: 1000183 |
Anritsu S331P ultra-compact AFU, cable and antenna analyzers Frequency: 150 kHz - 4 GHz (model S331P-0704). Frequency: 150 kHz - 6 GHz (model S331P-0706). Measurements: SWR, return loss, distance to fault (by SWR and return loss), cable loss, Smith chart, etc. Direct connection to the measurement object is possible without a phase-stable cable. Shock, dust and splash proof housing. Interface: USB. Powered by USB. Weight: 0.4 kg. Dimensions: 52 x 148 x 36 mm. Working temperature: from -10°С to +55°С. The smallest and most affordable cable and antenna analyzer |
| Anritsu MS2712E MS2713E |
|
Portable spectrum analyzers Anritsu MS2712E, MS2713E Frequency: 9 kHz - 4 GHz (model MS2712E). Frequency: 9 kHz - 6 GHz (model MS2713E). Resolution (RBW): 1 Hz - 3 MHz. Amplitude: +26 dBm to -162 dBm. Built-in preamplifier (standard). Noise: -162 dBm. Bandwidth (RBW) support 200 Hz, 9 kHz, 120 kHz with quasi-peak detector for preliminary EMC and EMI tests. Standard measurements: spectrum and signal analysis, field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: tracking generator, 2-port frequency response analysis, channel scanner, non-stationary signal and interference analysis, mapping of coverage areas on a map, supplying constant voltage to the central core, power measurement using sensors, GPS receiver, PIM detection, AM/FM/PM analyzer, etc. . Demodulation and Analysis quality of wireless communication standards: LTE, TD-SCDMA/HSPA+, GSM/EDGE, W-CDMA/HSPA+, CDMA, EV-DO, Fixed and Mobile WiMAX, ISDB-T, DVB-T/H. Comfortable touch screen. User Interface Russified. Interfaces: USB standard, Ethernet (optional). Operating temperature range: from -10°С to +55°С. Weight: 3.5 kg. Excellent performance, portability and low price |
| Anritsu Cell Master MT8212E MT8213E |
Product code: 1000011 |
Base Station Portable Analyzers MT8212E, MT8213E Frequency: 100 kHz - 4 or 6 GHz. Resolution (RBW): 10 Hz - 3 MHz. Amplitude: +26 dBm to -157 dBm. Noise: -157 dBm. Bandwidth support (RBW) 200 Hz, 9 kHz, 120 kHz with quasi-peak detector. Contains a built-in analyzer AFU (2 MHz - 4 or 6 GHz). Contains built-in power meter (10 MHz - 4 or 6 GHz). 3G demodulation and analysis options to test base stations. Measurements: spectrum analysis, signal analysis, transient analysis, tracking generator, channel scanner, field strength, signal/noise, bandwidth, ACPR, power, Smith chart, SWR, distance to fault, 2-port frequency response analysis, GPS receiver, etc. |
| Anritsu LMR Master S412E |
Product code: 1000012 |
Handheld Trunking System Analyzer (P25, NXDN, TETRA) Anritsu S412E Frequency: 500 kHz - 1.6 or 6 GHz. Resolution (RBW): 10 Hz - 3 MHz. Amplitude: +26 dBm to -120 dBm. Noise: -150 dBm. Bandwidth support (RBW) 200 Hz, 9 kHz, 120 kHz with quasi-peak detector. Contains vector analyzer S11, S21 (500 kHz - 1.6 or 6 GHz). Measurements: specialized measurements P25, NXDN, TETRA, spectrum and signal analysis, transient analysis, channel scanner, field strength, signal/noise, bandwidth, ACPR, power, 2-port frequency response analysis, demodulation and analysis of AM and FM signals, GPS receiver, etc. |
| Anritsu Site Master S820E |
Product code: 1000101 |
Portable analyzer of AFU, waveguides, cables and antennas Anritsu S820E Frequency: 1 MHz - 8 GHz (Model S820E-0708 with N(f) connectors). Frequency: 1 MHz - 14 GHz (Model S820E-0714 with N(f) connectors). Frequency: 1 MHz - 20 GHz (Model S820E-0720 with reinforced K(m) connectors). Frequency: 1 MHz - 30 GHz (Model S820E-0730 with reinforced K(m) connectors). Frequency: 1 MHz - 40 GHz (Model S820E-0740 with reinforced K(m) connectors). Measurement speed: 650 µs per point. Dynamic range: 110 dB. Measurements (1 port): SWR, return loss (return loss), distance to fault (by SWR and return loss), cable loss, phase, Smith chart. Measurements (2 ports): transfer characteristic, cable loss. Calibration modes: coaxial (OSL, TOSL) and waveguide (SSL, SSLT). high precision power meter (requires external sensor MA241xxA series). Vector network analyzer (Option S820E-0440): Measure S11, S21, S22, S12. Vector voltmeter (Option S820E-0441): A/B and B/A ratio measurement. 21.3 cm touchscreen (800 x 600 resolution). Interfaces: USB, Ethernet. Battery life from built-in battery: 6 hours. Weight: 3 kg. Dimensions: 273 x 199 x 91 mm. Working temperature: from -10°С to +55°С. The best portable solution for DAF and waveguide testing up to 40 GHz |
| Anritsu MS2720T |
|
Handheld Spectrum and Signal Analyzers Anritsu MS2720T Frequency: 9 kHz - 9 GHz (model MS2720T-0709). Frequency: 9 kHz - 13 GHz (model MS2720T-0713). Frequency: 9 kHz - 20 GHz (model MS2720T-0720). Frequency: 9 kHz - 32 GHz (model MS2720T-0732). Frequency: 9 kHz - 43 GHz (model MS2720T-0743). Resolution (RBW): 1 Hz - 10 MHz. Signal analysis bandwidth: 20 MHz (option). Amplitude: +30 dBm to -163 dBm. Noise: -163 dBm. Built-in preamp over the entire frequency range (for all models). Function of detection of short impulse signals (in a standard complete set). Standard measurements: field strength, occupied bandwidth, channel power, adjacent channel power ratio (ACPR), signal mask measurement, carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: tracking generator, Atomic Reference Oscillator, Channel Scanner, Transient and Interference Analysis, Mapping of Coverage Areas, Power Measurement with Sensors, IF Output (30 MHz Bandwidth), Sweep, I/Q Capture, GPS Receiver, AM/Analyzer FM/PM, etc. Demodulation and Quality Analysis wireless communication standards: GSM/GPRS/EDGE, W-CDMA/HSPA+, LTE/LTE-A FDD/TDD, CDMA/EV-DO, WiMAX Fixed/Mobile, TD-SCDMA. 21.3 cm touchscreen (800 x 600 resolution). User interface: in Russian. Operating time from built-in battery: 3 hours. Interfaces: USB, Ethernet. Weight: up to 4.4 kg. Dimensions: 315 x 211 x 77 mm. Working temperature: from -10°С to +55°С. Combination of portability and maximum performance |
| Anritsu MS2090A |
|
Handheld Spectrum and Signal Analyzers Anritsu MS2090A Frequency: 9 kHz - 9 GHz (model MS2090A-0709). Frequency: 9 kHz - 14 GHz (model MS2090A-0714). Frequency: 9 kHz - 20 GHz (model MS2090A-0720). Frequency: 9 kHz - 26.5 GHz (model MS2090A-0726). Frequency: 9 kHz - 32 GHz (model MS2090A-0732). Frequency: 9 kHz - 44 GHz (model MS2090A-0744). Frequency: 9 kHz - 54 GHz (model MS2090A-0754). Resolution (RBW): 1 Hz - 10 MHz. Signal analysis bandwidth: 100 MHz (option). Amplitude: +30 dBm to -164 dBm. Noise: -164 dBm. Amplitude measurement accuracy up to 14 GHz: ±0.5 dB (typical). Built-in preamp over the entire frequency range (for all models). Analysis band real time: 20 MHz (typical)100 MHz (option). Standard measurements: Channel Power, Occupied Bandwidth, Adjacent Channel Power Ratio (ACPR), Signal Mask Measurement, RSSI, Time-Frequency Diagram, Direction Finder Mode, etc. Demodulation and Quality Analysis wireless communication standards: 5G and LTE. 25.7 cm impact-resistant touchscreen (1280 x 800 resolution). Operating time from the built-in accumulator: 2 hours. Interfaces: USB3, Ethernet 1G. Weight: up to 5.4 kg. Dimensions: 314 x 235 x 95 mm. Working temperature: from -10°С to +55°С. Maximum spectrum analysis capabilities in a portable package |
| Optical reflectometers (OTDRs) of the Anritsu company | ||
| Anritsu MT9085A MT9085B MT9085C |
Product code: 1000263 |
Anritsu MT9085A/B/C ACCESS Master series of optical reflectometers Singlemode: 1310 nm, 1550 nm, 39 dB (model MT9085A-053). Singlemode: 1310 nm, 1550 nm, 42 dB (model MT9085B-053). Singlemode: 1310 nm, 1550 nm, 46 dB (model MT9085C-053). Multimode: 850 nm, 1300 nm and singlemode: 1310 nm, 1550 nm, 39 dB (model MT9085A-063). Multimode: 850 nm, 1300 nm and singlemode: 1310 nm, 1550 nm, 42 dB (model MT9085B-063). Singlemode: 1310 nm, 1550 nm, 42 dB+ 1650 nm (for active line) (model MT9085B-055). Singlemode: 1310 nm, 1550 nm, 46 dB+ 1625 nm (for passive line) (model MT9085C-057). In total, there are 11 models in the series with wavelengths: 850, 1300, 1310, 1490, 1550, 1625 and 1650 nm. Operating range on a real line: up to 125 km (for MT9085C), up to 110 km (for MT9085B), up to 100 km (for MT9085A). Event Dead Zone (EDZ): 0.8 m. Number of reflectogram points: up to 150,001. Built-in radiation source. Built-in power meter. Representation of a fiber line in the form of a diagram. Built-in VFL illumination (option 002). Video microscope for connectors (option G0306B). 1 GB internal memory (up to 50,000 traces). reflectometer Russified. 20.3 cm widescreen touchscreen (800 x 480 resolution). Interfaces: USB. Battery life: till 12 o'clock. Rugged and comfortable case design. Weight: 2.6 kg. Dimensions: 284 x 200 x 77 mm. Working temperature: from -10°С to +50°С. Series of professional reflectometers with wide possibilities |
| Optical Spectrum Analyzers of the Anritsu company | ||
| Anritsu MS9740B | 
Product code: 1000364 |
Anritsu MS9740B Optical Spectrum Analyzer Wavelength range: 600 nm - 1725 nm. Dynamic Range: -90dBm to +23dBm. Wavelength measurement error: 0.02 nm. Power measurement error: 0.4 dB. Typical measurement time 350 ms. Built-in source for calibration (option). Nine modes optimized for typical measurements: DFB-LD, FP-LD, LED, LD Module, PMD, Optical Amplifier, Optical Amplifier WDM, WDM Filter, WDM Spectrum. DWDM support with 50 and 100 GHz channel spacing. 21.3 cm screen (800 x 600 resolution). Interfaces: Ethernet, IEEE-488 (GPIB). Weight: 15 kg. Dimensions: 426 x 177 x 350 mm. Working temperature: from +5°С to +45°С. Professional analyzer for laboratory and production |
Anritsu Master Software Tools v2.21 (209 MB)
Tehencom company offers both completely new devices, as well as used and fully restored in the factory. The cost of refurbished devices can be 1.5 - 2 times lower than the cost of new ones. All offered refurbished devices are 100% functional, meet the technical requirements of the manufacturer and are provided with a 1 year warranty.