Keithley DAQ6510 6.5 Digit Multimeter Data Acquisition System

SHORT DESCRIPTION

Multifunctional data acquisition system Keithley DAQ6510 based on new precision multimeter Keithley DMM6500 with a resolution of 6.5 bits. The rear panel of the Keithley DAQ6510 has two free slots for two 7700 series switching and control modules. management, etc. You can download a detailed description of the characteristics of all replaceable modules and the Keithley DAQ6510 system itself below on this page in the section Documentation.

Main characteristics:
Resolution: 6.5 digits.
Basic Accuracy (DCV): 0.0025%.
Voltage measurement range: 0.1 µV to 1010 V.
Current measurement range: 10 pA to 10.1 A.
Resistance measurement range: 1 µΩ to 120 GΩ.
Capacitance measurement range: 0.1pF to 120uF.
Digitization of voltage and current signals: 16 bits (from 1 kS/s to 1 MS/s).
12 types of switching and control modules. Possibility to install two modules.
Depending on the type, the modules may contain: a switch for 20, 32 or 40 input channels, 16 digital and 2 analog control outputs, a 6x8 arbitrary switching matrix, a 3.5 GHz microwave switch, etc. The maximum number of channels: 80.
15 types of measurements: DC and AC voltage and current,
resistance (2-wire and 4-wire), capacitance, period, frequency, diode test, temperature (using thermocouples, thermistors and RTDs), etc.
Free computer software, drivers LabVIEW, IVI-C, IVI-COM.
12.7 cm widescreen touchscreen (800 x 480 resolution). Weight: 4.54 kg.
Interfaces: Ethernet/LXI and USB (standard); IEEE-488.2 (GPIB), RS-232 and TSP-Link (optional).
Multifunctional data acquisition system with 6.5 digit multimeter

Just need precision multimeter? see model Keithley DMM6500.
Required very accurate multimeter? see model Keithley DMM7510.
Need signal source and multimeter in one device? see model Keithley 2450.
All series of multimeters are presented here: home page for laboratory multimeters.

DETAILED DESCRIPTION

Keithley has been developing data acquisition and control systems for many years. For example, the Keithley 3700A series instruments can contain up to six switching modules with a total of 576 channels.

The new Keithley DAQ6510 data acquisition system can contain only two modules with a maximum of 80 channels. But thanks to the built-in precision multimeter Keithley DMM6500 it can perform 15 measurements, provides a resolution of 6.5 digits, a basic accuracy of 0.0025% per year, and allows direct digitization of voltage and current signals. The strengths of the Keithley DAQ6510 data acquisition system also include: low cost, a 12.7 cm touch screen and a large selection of communication interfaces for inclusion in automated measuring systems.

Keithley DAQ6510 Data Acquisition System can perform 15 measurements

With a built-in full-featured 6.5-digit multimeter, the Keithley DAQ6510 system performs measurements with maximum accuracy. The figure below shows the 15 measurement functions and their corresponding measurement ranges of the DAQ6510 system. All of these measurement functions can be used with any of the 12 7700 Series Switching and Control Modules.

The maximum measurement accuracy is achieved by filtering and averaging the results of a series of measurements in a certain time interval. The accuracy of measuring low resistances can be improved by applying thermal offset compensation. The DAQ6510 measures low resistances with a resolution of 1 µΩ. The maximum speed is obtained when measurements are taken within 0.0005 of the mains voltage cycle or 10 µs at a mains frequency of 50 Hz.

7700 Series Pluggable Switching and Control Modules

The front panel connectors on the Keithley DAQ6510 allow it to be used as a 6.5 digit precision multimeter. And two expansion slots on the rear panel allow you to install 7700 Series modules that turn the Keithley DAQ6510 into a multifunctional data acquisition system.

The 7700 series of switching and control modules consists of 12 modules. This table lists the model numbers of all modules with a brief description of their capabilities.

This photo shows the appearance of some of the 7700 Series modules that can be installed in the Keithley DAQ6510 Multifunction Data Acquisition System. You can download a detailed description of the characteristics of all plug-in modules below on this page in the section Documentation.

Keithley DAQ6510 Data Acquisition System Widescreen Touch Screen 12.7 cm

One of the advantages of the Keithley DAQ6510 data acquisition system is a 12.7 cm widescreen touch screen with a resolution of 800 x 480 pixels. Touch controls and a well-thought-out menu system speed up and simplify work, and a large number of points allows you to see all the details of the signal.

Keithley DAQ6510 Data Acquisition Rear Panel

The rear panel of the Keithley DAQ6510 contains Ethernet/LXI and USB interfaces for integration into computer-controlled automated systems. In the upper left part of the rear panel there is a "COMMUNICATION ACCESSORY" slot covered with a plug, in which you can install an additional board that adds one of the interfaces: IEEE-488.2 (GPIB), RS-232 or TSP-Link.

In the central lower part of the rear panel there are two expansion slots covered with "KEITHLEY SLOT COVER" plugs, in which any two of the twelve 7700 series switching and control modules can be installed. The rear panel without installed modules is shown in this photo.

This photo shows the rear panel of the Keithley DAQ6510 Data Acquisition System. An additional board is installed in the upper left part of the rear panel (instead of the "COMMUNICATION ACCESSORY" plug), which adds a TSP-Link interface. In the center lower part of the rear panel (instead of two "KEITHLEY SLOT COVER" plugs), two modules from the 7700 series are installed. These are the Keithley 7703 module (32-channel high-speed differential multiplexer) and the Keithley 7700 module (20-channel differential multiplexer with automatic cold temperature compensation). junction).

Key Specifications for the Keithley DAQ6510 Data Acquisition System

Listed below are the main features of the four multiplexer modules, one control module, and one I/O module that can be installed in the Keithley DAQ6510 data acquisition system.

This table lists the main features of the two multiplexer modules, one I/O module, one matrix switcher module, and two RF switching modules that can be installed in the Keithley DAQ6510 data acquisition system.

The two tables above list the key features of the twelve 7700 Series modules that can be installed in the Keithley DAQ6510 Multifunction Data Acquisition System. The modules themselves only perform signal switching, and the measurements are carried out using the precision multimeter built into the Keithley DAQ6510 (it is similar to the multimeter Keithley DMM6500).

For a complete list of technical characteristics of the Keithley DAQ6510 data acquisition system and Keithley 7700 series switching and control modules, see below on this page in the section Documentation.

Keithley DAQ6510 Data Acquisition Kit

Options and accessories for the Keithley DAQ6510 data acquisition system

Below are the main options and accessories for the Keithley DAQ6510 system. See the full list of options and accessories (wires, probes and probes) below on this page in the section Documentation.