Anritsu MT1000A Modular Telecom Network Analyzer

Product code: 1000378

On order

Add item to cart. Our specialist will coordinate with you the complete set, tell you the price and delivery time.

Price on request

Add to cart

SHORT DESCRIPTION

Modular transport network analyzer MT1000A Japanese company Anritsu supports all modern data transmission standards (OTN, Ethernet, Fiber Channel, SDH, PDH, etc.) in networks at speeds up to 11.3 Gbps. This analyzer can perform all the necessary tests to validate networks against international standards (G.709, G.8201, M.2401, O.182, Y.1564, G.826x, IEEE 1588 v2, etc.) and at the same time it is relatively inexpensive. The instrument's widescreen touch screen makes it easy to configure tests and view measurement results. A convenient case design and a clear graphical user interface make the analyzer work Anritsu MT1000A simple and enjoyable.

Main characteristics:
Designed for full testing of OTN, Ethernet, Fiber Channel, SDH, PDH.
Support two ports for all standards and bit rates.
Key features testing and analysis OTN (G.709 standard):
OTU2f(11.318 Gbps), OTU2e, OTU2, OTU1f, OTU1e, OTU1 (2.666 Gbps).
ODU0, ODUflex, ODU1 and ODU2 including ODU0 - ODU2 multistage mapping.
OTN error testing according to G.8201 and M.2401.
Error Correction Function (FEC) testing in accordance with ITU-T O.182.
Testing client traffic Ethernet, Fiber Channel and SDH, embedded in OTN.
Key features Ethernet testing and analysis:
Testing Ethernet at speeds 10G, 1G, 100M and 10M.
Traffic generation at full speed. Support for IPv4 and IPv6.
Ethernet Service Activation Test (Y.1564), RFC 2544 test, BER test.
Testing synchronous Ethernet (G.826x and IEEE 1588 v2).
MPLS, MPLS-TP and PBB/PBB-TE testing.
Multistream Ethernet and Stacked VLAN (Q-in-Q) support.
Key features testing and analysis SDH/SONET/PDH/DSn:
SDH (STM-64, STM-16, STM-4, STM-1) and SONET (OC-192, OC-48, OC-12, OC-3) testing.
PDH (E1, E3, E4) and DSn (DS1, DS3) testing. Detailed crash and error statistics.
Simultaneous bi-directional monitoring of SDH/SONET/PDH/DSn lines.
Embedding and extracting PDH/DSn signals from SDH/SONET.
Key features of Fiber Channel testing and analysis:
Testing 1GFC, 2GFC, 4GFC, 8GFC and 10GFC with OTN embedding.
Delay measurement, BER test, crash and error monitoring.
Structural characteristics of the MT1000A analyzer with the MU100010A module:
22.8 cm widescreen touchscreen (800 x 480 resolution).
Interfaces for connecting to a PC: USB, Ethernet, Wi-Fi, Bluetooth.
Battery life: up to 4 hours. Convenient case design.
Weight: 2.7 kg. Dimensions: 257 x 164 x 77 mm. Working temperature: from 0°С to +50°С.
Latest solution for testing OTN, Ethernet, SDH, PDH, etc.

Necessary inexpensive solution for testing networks up to 10.7 Gbps? Watch the series EXFO MAX-800.
Need a modular analyzer for all types of networks up to 111.81 Gbps? Watch the series EXFO FTB-1v2 Pro.
Want to see the full list? Go to the main page for telecom test equipment.

Video review of Anritsu MT1000A Modular Data Network Analyzer and Anritsu MT1100A Modular Measurement Platform

Watch this short video to see the main features of the two series of modular analyzers: Anritsu MT1000A (up to 100 Gbps) and Anritsu MT1100A (up to 100 Gbps), as well as to better understand their functional and design features.

DETAILED DESCRIPTION

Today's communication networks are becoming more and more complex as leading carriers implement the latest technologies on their transport networks: OTN, MPLS-TP, synchronous Ethernet, etc. In addition to implementing the latest technologies, operators must also support existing SDH/PDH and fiber channel. New Modular Transport Network Analyzer Network Master Pro MT1000A allows you to effectively perform all the tests and measurements required by the standards in modern networks, while not spending a lot of money on its purchase.

Main Design Features of the Anritsu MT1000A Transport Network Analyzer

Transport Network Analyzer Anritsu MT1000A contains all the necessary interfaces to connect to any type of network, from the legacy but still widely used E1 streams at 2.048 Mbps to the latest optical OTN and Ethernet at speeds up to 11.318 Gbps. The figure below shows the main design features of the MT1000A analyzer.

It is especially worth emphasizing that all interfaces (electrical and optical) are implemented as two-port, that is, it is possible to speed up testing twice (parallel operation with two different interfaces) or connect the MT1000A analyzer in the transparent traffic monitoring mode, when the analyzer is included in a network break.

Key Features of the Anritsu MT1000A Analyzer for OTN Testing (G.709 Standard)

The MT1000A analyzer capabilities allow you to fully test the OTN network and individual network components for compliance with standards, as well as quickly detect and correct errors in an already operating network. Key features include:
- OTU2f support (11.318 Gbps), OTU2e, OTU2, OTU1f, OTU1e, OTU1 (2.666 Gbps).
- support for ODU0, ODUflex, ODU1 and ODU2 including ODU0 - ODU2 multistage mapping.
- OTN error testing according to G.8201 and M.2401.
- Error Correction Function (FEC) testing in accordance with ITU-T O.182.
- testing of Ethernet, Fiber Channel and SDH client traffic, embedded in OTN.

For detailed information on the capabilities of the MT1000A analyzer when testing OTN networks, as well as on measurement methods, see and download on this page in the section Documentation.

Key Features of the Anritsu MT1000A Analyzer for Ethernet Testing

The MT1000A analyzer capabilities allow you to fully test the Ethernet network and individual network components for compliance with standards, as well as quickly detect and correct errors in an already operating network. Key features include:
- testing Ethernet at speeds 10G, 1G, 100M and 10M.
- traffic generation at full speed. Support for IPv4 and IPv6.
- Ethernet service activation test (Y.1564), RFC 2544 test, BER test.
- testing synchronous Ethernet (G.826x and IEEE 1588 v2).
- MPLS, MPLS-TP and PBB/PBB-TE testing.
- support for multistream Ethernet and Stacked VLAN (Q-in-Q).

For detailed information on the capabilities of the MT1000A analyzer when testing Ethernet networks, as well as on measurement methods, see and download on this page in the section Documentation.

Key Features of Anritsu MT1000A Analyzer for SDH and PDH Testing

The MT1000A analyzer capabilities allow you to fully test SDH/SONET/PDH/DSn synchronous networks and individual components of these networks for compliance with standards, as well as quickly detect and correct errors in an already operating network. Key features include:
- SDH (STM-64, STM-16, STM-4, STM-1) and SONET (OC-192, OC-48, OC-12, OC-3) testing.
- PDH (E1, E3, E4) and DSn (DS1, DS3) testing. Detailed crash and error statistics.
- simultaneous bidirectional monitoring of SDH/SONET/PDH/DSn lines.
- embedding and extraction of PDH/DSn signals from SDH/SONET.

For detailed information on the capabilities of the MT1000A analyzer when testing SDH networks, as well as on measurement methods, see and download on this page in the section Documentation.

Anritsu MT1000A Modular Transport Network Analyzer Specifications

Anritsu MT1000A Modular Transport Network Analyzer Package

- control block MT1000A Network Master Pro
- measuring module MU100010A
- power cord
- Li-ion battery
- AC adapter/charger adapter
- stylus
- DVD with documentation and software
- quick reference guide
- soft carrying bag
- warranty: 1 year (can be extended up to 3 years)

Options and accessories for Anritsu MT1000A Modular Transport Network Analyzer

The complete list of options and accessories for the Anritsu MT1000A Modular Analyzer includes dozens of different items. For detailed information on options, SFP, etc., see this page in the section Documentation.