ITECH IT6900A stabilized laboratory power supply series

Expert choice
ITECH IT6900A series of stabilized power supplies with regulation

Brief description of the series

When you need maximum performance and versatility from a laboratory power supply, look no further than the ITECH IT6900A professional series. The devices of this series have a good power reserve and a whole range of additional useful functions: automatic voltage and current range selection, list mode (up to 150 steps), timer mode (from 0.1 to 99 999 seconds), built-in multimeter, quiet cooling fan with auto speed control, automatic protection (from overvoltage, overcurrent and overheating), IT7000 control software and all popular communication interfaces.

The ITECH IT6900A series includes 12 models of stabilized regulated DC power supplies with voltage regulation up to 150 V, current regulation up to 25 A and maximum output power up to 600 W. Models ending in B have additional RS-485 computer interface and additional connector to control voltage and current using an analog signal. For detailed differences between the series models, see the interactive table. A full description of all the characteristics, as well as a driver for LabVIEW can be downloaded below on this page in the Documentation section.

All models of the series

The ITECH IT6900A series consists of twelve models, which are presented in this interactive table. You can sort by any of the characteristics by simply clicking on its name in the table. To see all the characteristics of certain models, add them to the comparison.

Main characteristics of ITECH IT6900A series models
Model
Maximum output power (DC)
Maximum output voltage (DC)
Maximum output current (DC)
Voltage resolution (DC)
Current resolution (DC)
Number of channels (DC)
Operating principle
Weight
100 W 60 V 5 A 1 mV 0.1 mA 1 Switching 7.7 kg
200 W 60 V 10 A 1 mV 1 mA 1 Switching 7.7 kg
200 W 150 V 5 A 1 mV 0.1 mA 1 Switching 7.7 kg
Expert choice
360 W 60 V 15 A 1 mV 1 mA 1 Switching 7.7 kg
Expert choice
600 W 60 V 25 A 1 mV 1 mA 1 Switching 15 kg
Expert choice
600 W 150 V 10 A 1 mV 1 mA 1 Switching 15 kg
100 W 60 V 5 A 1 mV 0.1 mA 1 Switching 7.7 kg
200 W 60 V 10 A 1 mV 1 mA 1 Switching 7.7 kg
200 W 150 V 5 A 1 mV 0.1 mA 1 Switching 7.7 kg
360 W 60 V 15 A 1 mV 1 mA 1 Switching 7.7 kg
600 W 60 V 25 A 1 mV 1 mA 1 Switching 15 kg
600 W 150 V 10 A 1 mV 1 mA 1 Switching 15 kg

Automatic output power limitation

With automatic voltage and current limiting when the maximum output power is exceeded, all models in the IT6900A series provide excellent versatility. Such volt-ampere characteristic of the DC power supply increases the working area for the formation of voltage and current ratings. For example, one IT6922A (60 V, 5 A, 100 W) power supply can replace three standard power supplies: (60 V, 1.7 A), (40 V, 2.5 A) and (20 V, 5 A). For clarity, the working area of the IT6922A is shown below, which provides 100 W of output power. Read more about how this feature works here: voltage and current value range.

Volt-ampere characteristics of the ITECH IT6922A model (60 V, 5 A, 100 W)
Working area of the ITECH IT6922A (60 V, 5 A, 100 W) laboratory power supply, which provides an output power of 100 W.

IT7000 software for controlling power supplies

The included free IT7000 computer software has powerful monitoring and control functions for ITECH IT6900A series laboratory power supplies. The IT7000 software can display and record voltage and current, as well as perform fully automatic tests by executing a sequence of commands. See more here: control modes.

IT7000 software screenshot
The IT7000 PC software has powerful functions for controlling the ITECH IT6900A series stabilized laboratory power supplies.

All IT6900A series laboratory power supplies have USB, RS-232 and GPIB (IEEE-488.2) interfaces on the rear panel that can be used to connect the power supply to a computer. Models ending in B have additional RS-485 computer interface.

IT6900A series laboratory power supplies rear panel (revision A)
On the rear panel of all IT6900A series laboratory power supplies are interfaces: USB, RS-232 and GPIB (IEEE-488.2).

Additional accessories

  • ITECH IT-E30110-BY
    Product code: 9750003
    On order Expert choice

    A pair of cables for power supplies and electronic loads. Length 1 meter, current up to 10 A, tips: banana plug - U type terminal.

    From 2 154 UAH

  • ITECH IT-E30110-AB
    Product code: 9750001
    On order

    A pair of cables for power supplies and electronic loads. Length 1 meter, current up to 10 A, tips: banana plug - alligator clip.

    From 2 154 UAH

  • ITECH IT-E30110-BB
    Product code: 9750002
    On order

    A pair of cables for power supplies and electronic loads. Length 1 meter, current up to 10 A, tips: banana plug - banana plug.

    From 2 154 UAH

  • ITECH IT-E30320-YY
    Product code: 9750020
    On order

    A pair of cables for power supplies and electronic loads. Length 2 meters, current up to 30 A, tips: U type terminal - U type terminal.

    From 1 722 UAH

  • ITECH IT-E151A
    Product code: 9750017
    On order

    Rack mount kit for ITECH laboratory power supplies.

    From 3 660 UAH

Documentation and useful materials

Documentation Downloads