Devices for radio monitoring and radio control

Radio monitoring and radio control tasks are: detection, direction finding and analysis of radio signals, which is necessary to ensure public and national security, as well as control of frequency allocation at the state level.

Also, radio monitoring and radio control are used to ensure electromagnetic compatibility (EMC) of various means of communication, compliance with sanitary standards and legal restrictions. In addition, with their help, the tasks of obtaining information about operating transmitters in a certain area (or within an object), determining their type, basic characteristics, demodulating and decoding the transmitted information for the purpose of detection or control are solved.

Tehencom company supplies a large number of devices for radio monitoring and radio control: complexes, means and systems of radio monitoring and radio control, devices for monitoring the spectrum, direction finders, radio direction finders, receivers, radio receivers, radio receivers for detection, direction finding and analysis of radio signals, spectrum analyzers, measuring antennas, antenna systems and etc.

Below are the most popular radio monitoring equipment. Regarding prices and delivery times for the entire range of instrumentation, simply call us or write to us at E-mail and we will be happy to answer your questions.

Model	A photo	Short description
Devices for radio monitoring and radio control of the Anritsu company
Anritsu MS276xA		Ultra-Portable Spectrum Analyzers Anritsu MS276xA Frequency: 9 kHz - 32 GHz (model MS2760A-0032), 6 GHz - 32 GHz (MS2762A-0032). Frequency: 9 kHz - 44 GHz (model MS2760A-0044), 6 GHz - 44 GHz (MS2762A-0044). Frequency: 9 kHz - 50 GHz (model MS2760A-0050), 6 GHz - 50 GHz (MS2762A-0050). Frequency: 9 kHz - 70 GHz (model MS2760A-0070), 6 GHz - 70 GHz (MS2762A-0070). Frequency: 9 kHz - 90 GHz (model MS2760A-0090), 6 GHz - 90 GHz (MS2762A-0090). Frequency: 9 kHz - 110 GHz (model MS2760A-0110), 6 GHz - 110 GHz (MS2762A-0110). Frequency: 9 kHz - 145 GHz (model MS2760A-0145), 6 GHz - 145 GHz (MS2762A-0145). Frequency: 9 kHz - 170 GHz (model MS2760A-0170), 6 GHz - 170 GHz (MS2762A-0170). Resolution (RBW): 1 Hz - 3 MHz. Dynamic Range: More than 103 dB or 108 dB. Amplitude: +10 dBm to -136 dBm (eight MS2760A models). Amplitude: 0 dBm to -137 dBm (eight MS2762A models). Amplitude Accuracy: ±0.5 dB (typical up to 170 GHz). Standard measurements: channel power, occupied bandwidth and adjacent channel power ratio (ACPR). Reference frequency input 10 MHz, external trigger input. Interface: USB 3.0. Shock, shock, temperature and humidity resistance: MIL-PRF-28800F Class 3. Weight: 0.255 kg. Dimensions: 155 x 84 x 27 mm. Working temperature: from 0°С to +50°С. Maximum frequencies at minimum size and cost
Anritsu MS2090A		Handheld Spectrum and Signal Analyzers Anritsu MS2090A Frequency: 9 kHz - 9 GHz (model MS2090A-0709). Frequency: 9 kHz - 14 GHz (model MS2090A-0714). Frequency: 9 kHz - 20 GHz (model MS2090A-0720). Frequency: 9 kHz - 26.5 GHz (model MS2090A-0726). Frequency: 9 kHz - 32 GHz (model MS2090A-0732). Frequency: 9 kHz - 44 GHz (model MS2090A-0744). Frequency: 9 kHz - 54 GHz (model MS2090A-0754). Resolution (RBW): 1 Hz - 10 MHz. Signal analysis bandwidth: 100 MHz (option). Amplitude: +30 dBm to -164 dBm. Noise: -164 dBm. Amplitude measurement accuracy up to 14 GHz: ±0.5 dB (typical). Built-in preamp over the entire frequency range (for all models). Analysis band real time: 20 MHz (typical)100 MHz (option). Standard measurements: Channel Power, Occupied Bandwidth, Adjacent Channel Power Ratio (ACPR), Signal Mask Measurement, RSSI, Time-Frequency Diagram, Direction Finder Mode, etc. Demodulation and Quality Analysis wireless communication standards: 5G and LTE. 25.7 cm impact-resistant touchscreen (1280 x 800 resolution). Operating time from the built-in accumulator: 2 hours. Interfaces: USB3, Ethernet 1G. Weight: up to 5.4 kg. Dimensions: 314 x 235 x 95 mm. Working temperature: from -10°С to +55°С. Maximum spectrum analysis capabilities in a portable package
Anritsu MS2720T		Handheld Spectrum and Signal Analyzers Anritsu MS2720T Frequency: 9 kHz - 9 GHz (model MS2720T-0709). Frequency: 9 kHz - 13 GHz (model MS2720T-0713). Frequency: 9 kHz - 20 GHz (model MS2720T-0720). Frequency: 9 kHz - 32 GHz (model MS2720T-0732). Frequency: 9 kHz - 43 GHz (model MS2720T-0743). Resolution (RBW): 1 Hz - 10 MHz. Signal analysis bandwidth: 20 MHz (option). Amplitude: +30 dBm to -163 dBm. Noise: -163 dBm. Built-in preamp over the entire frequency range (for all models). Function of detection of short impulse signals (in a standard complete set). Standard measurements: field strength, occupied bandwidth, channel power, adjacent channel power ratio (ACPR), signal mask measurement, carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: tracking generator, Atomic Reference Oscillator, Channel Scanner, Transient and Interference Analysis, Mapping of Coverage Areas, Power Measurement with Sensors, IF Output (30 MHz Bandwidth), Sweep, I/Q Capture, GPS Receiver, AM/Analyzer FM/PM, etc. Demodulation and Quality Analysis wireless communication standards: GSM/GPRS/EDGE, W-CDMA/HSPA+, LTE/LTE-A FDD/TDD, CDMA/EV-DO, WiMAX Fixed/Mobile, TD-SCDMA. 21.3 cm touchscreen (800 x 600 resolution). User interface: in Russian. Operating time from built-in battery: 3 hours. Interfaces: USB, Ethernet. Weight: up to 4.4 kg. Dimensions: 315 x 211 x 77 mm. Working temperature: from -10°С to +55°С. Combination of portability and maximum performance
Anritsu MS2712E MS2713E		Portable spectrum analyzers Anritsu MS2712E, MS2713E Frequency: 9 kHz - 4 GHz (model MS2712E). Frequency: 9 kHz - 6 GHz (model MS2713E). Resolution (RBW): 1 Hz - 3 MHz. Amplitude: +26 dBm to -162 dBm. Built-in preamplifier (standard). Noise: -162 dBm. Bandwidth (RBW) support 200 Hz, 9 kHz, 120 kHz with quasi-peak detector for preliminary EMC and EMI tests. Standard measurements: spectrum and signal analysis, field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: tracking generator, 2-port frequency response analysis, channel scanner, non-stationary signal and interference analysis, mapping of coverage areas on a map, supplying constant voltage to the central core, power measurement using sensors, GPS receiver, PIM detection, AM/FM/PM analyzer, etc. . Demodulation and Analysis quality of wireless communication standards: LTE, TD-SCDMA/HSPA+, GSM/EDGE, W-CDMA/HSPA+, CDMA, EV-DO, Fixed and Mobile WiMAX, ISDB-T, DVB-T/H. Comfortable touch screen. User Interface Russified. Interfaces: USB standard, Ethernet (optional). Operating temperature range: from -10°С to +55°С. Weight: 3.5 kg. Excellent performance, portability and low price
Anritsu MX280007A	Add to cart Product code: 1000013	Anritsu MX280007A Mobile Interference Detection System Frequency: 9 kHz - 54 GHz (depending on analyzer model). Designed for driving tests. Compatible with any car. Fully automatic search for single and multiple sources. Operated by one person (driver-operator). Uses an omnidirectional antenna, an Anritsu handheld spectrum analyzer and a Windows compatible tablet or laptop that displays an interactive map with measurement results and directions to follow. In conditions of dense urban development, it correctly processes multipath and reflected signals, as well as dead zones. Can be remotely connected to stationary spectral monitors. A simple and affordable solution to quickly find sources of interference
Anritsu MS27101A MS27102A MS27103A		Anritsu MS2710xA Series Remote Spectrum Analyzers Frequency: 9 kHz - 6 GHz. one RF input (model MS27101A). 1 or 2 RF inputs, outdoor version IP67 (model MS27102A). 12 or 24 RF inputs (model MS27103A). Resolution (RBW): 10 Hz - 3 MHz. FFT bandwidth: 20 MHz (instantaneous analysis). Amplitude: +30 dBm to -152 dBm. Noise: -152 dBm. Built-in preamp. Scan speed: up to 24 GHz/s. Built-in GPS receiver. Optimized for remote control. Power consumption: less than 11W. Interfaces: Gigabit Ethernet. Weight: 2.8 to 6.9 kg (varies by model). Working temperature: from 0°С to +50°С (model MS27101A). Working temperature: from -40°С to +55°С (models MS27102A and MS27103A). An excellent choice for 24/7 remote spectrum monitoring
Measuring antennas of the Aaronia company
Aaronia HyperLOG 7025 7040 7060		Aaronia HyperLOG 70 directional log-periodic antennas Frequency: 700 MHz - 2.5 GHz (model HyperLOG 7025). Frequency: 700 MHz - 4 GHz (model HyperLOG 7040). Frequency: 700 MHz - 6 GHz (model HyperLOG 7060). Gain: 4 dBi to 5 dBi (model dependent) Calibration points (in 10 MHz steps): 183 to 533 (model dependent). Maximum power: 100W (at 400MHz). Attaches to a standard tripod or handle. Suitable for measurement standards: CISPR, VDE, MIL, VG, EN 55011, EN 55013, EN 55015, EN 55022, MIL-Std-461, etc. Connector: SMA(f). Weight: 0.27 kg. Dimensions: 340 x 200 x 25 mm. Compact and inexpensive antennas for a wide range of applications
Aaronia HyperLOG 6080 60100 60180	Add to cart Product code: 1000206	Directional log-periodic antennas Aaronia HyperLOG 6080, HyperLOG 60100, HyperLOG 60180 Frequency: 680 MHz - 8 GHz (model HyperLOG 6080). Frequency: 680 MHz - 10 GHz (model HyperLOG 60100). Frequency: 680 MHz - 18 GHz (model HyperLOG 60180). Gain: 5 dBi (typical) Over 700 calibration points (10 MHz step). Maximum power: 50W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.25 kg. Dimensions: 340 x 200 x 25 mm.
Aaronia HyperLOG 4025X 4040X 4060X	Add to cart Product code: 1000207	Active directional log-periodic antennas Aaronia HyperLOG 4025X, HyperLOG 4040X, HyperLOG 4060X Frequency: 400 MHz - 2.5 GHz (model HyperLOG 4025X). Frequency: 400 MHz - 4 GHz (model HyperLOG 4040X). Frequency: 400 MHz - 6 GHz (model HyperLOG 4060X). Gain: 44 dBi (typical) Over 200 calibration points (10 MHz step). PC interface: USB. 1/4" tripod mount. Connector: SMA(f). Weight: 1.4 kg. Dimensions: 590 x 360 x 30 mm.
Aaronia BicoLOG 5070 30100 20100 20300	Add to cart Product code: 1000208	Biconical antennas Aaronia BicoLOG 5070, 30100, 20100 and 20300 Frequency: 50 MHz - 700 MHz (model BicoLOG 5070). Frequency: 30 MHz - 1 GHz (model BicoLOG 30100). Frequency: 20 MHz - 1 GHz (model BicoLOG 20100). Frequency: 20 MHz - 3 GHz (model BicoLOG 20300). Gain: up to 1 dBi (see graphs in pdf description). 70 to 296 calibration points in 10 MHz steps (model dependent). Maximum power: 5W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.35 kg. Dimensions: 350 x 160 x 140 mm.
Aaronia IsoLOG 3D	Add to cart Product code: 1000209	Multisection antenna (antenna array) Aaronia IsoLOG 3D Frequency: 9 kHz - 6, 20 or 40 GHz (models IsoLOG 3D 80-UWB and IsoLOG 3D 160-UWB). Frequency: 680 MHz - 6, 20 or 40 GHz (models IsoLOG 3D 80 and IsoLOG 3D 160). The array contains from 16 to 48 antennas. Number of detection sectors: 8 or 16. Full 360° monitoring without rotating parts. Switching speed between antennas: up to 1 µs. Built-in real time clock and GPS (option). Connector: N(f). Management interface: Ethernet. Control program included. Weight: 20 - 23 kg. Dimensions: 950 x 950 x 300 mm. Working temperature: from -30°С to +60°С.
Measuring antennas of the Schwarzbeck company
Schwarzbeck BBHA 9170	Add to cart Product code: 1000210	Horn Measuring Antenna BBHA 9170 Frequency: 15 GHz - 26.5 GHz. Possible: 14 GHz - 40 GHz. Gain: 15 to 20 dBi. Directional pattern: 13-21 degrees (E-plane), 14-23 degrees (H-plane). Maximum power: 10W. Connector: SMA(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range.
Schwarzbeck BBHA 9120D	Add to cart Product code: 1000211	Horn Measuring Antenna BBHA 9120 D Frequency: 1 GHz - 18 GHz. Gain: 6 to 16 dBi. Directional pattern: 90-10 degrees (E-plane), 60-10 degrees (H-plane). Maximum power: 300W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range.
Schwarzbeck USLP 9143B	Add to cart Product code: 1000212	Log-periodic antenna USLP 9143 B Frequency: 180 MHz - 8 GHz. Gain: 4.5 to 7.1 dBi. Directional pattern: 45-65 degrees (E-plane), 90-120 degrees (H-plane). Maximum power: 200W (up to 500MHz), 50W (up to 7GHz). Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range.
Schwarzbeck UHALP 9108 A	Add to cart Product code: 1000213	Log-periodic antenna UHALP 9108 A Frequency: 250 MHz - 2.4 GHz. Gain: 2.1 to 7.7 dBi. Directional pattern: 60 degrees (E plane), 110 degrees (H plane). Maximum power: 1000W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range.
Schwarzbeck UBAA 9114	Add to cart Product code: 1000214	UBAA 9114 Matched Antenna Holder Frequency: 30 MHz - 1000 MHz. The main characteristics depend on: installed biconical element. Maximum power: 10W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range.
Schwarzbeck EFS 9218	Add to cart Product code: 1000215	Active Biconical Antenna EFS 9218 Frequency: 9 kHz - 300 MHz. Antenna ratio with off preamplifier: 47 dB/m (40 kHz - 250 MHz). Antenna ratio with incl. preamplifier: 20 dB/m (40 kHz - 250 MHz). Built-in preamplifier (option VV). Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range.
Schwarzbeck VHAP UHAP	Add to cart Product code: 1000216	Precision calibration dipoles VHAP, UHAP Frequency: 30 MHz - 300 MHz (model VHAP), 300 MHz - 1 GHz (UHAP model). Can be used in pairs for standard measurements CISPR 16-1-5. Each antenna comes with a detailed calibration certificate indicating the actual gain of the antenna in the frequency range, as well as a number of additional data.
Measuring antennas of the Anritsu company
Anritsu 2000-1616	Add to cart Product code: 1000217	Wide Range Omnidirectional Antenna 2000-1616 Frequency: 20 MHz - 21 GHz. Gain: -7 to 0 dBi. Polarization: vertical / non-directional. Maximum power: 10W. Connector: N(f).
Anritsu 2000-1617	Add to cart Product code: 1000218	Wide-range log-periodic antenna 2000-1617 Frequency: 600 MHz - 21 GHz. Gain: -5 to 8 dBi (up to 12 GHz), 0 to 6 dBi (up to 21 GHz) Directional pattern: 70 degrees (E plane), 125 degrees (H plane). Maximum power: 10W. Connector: N(f).
Measuring antennas of the Tektronix company
Tektronix DF-A0047	Add to cart Product code: 1000219	Directional antenna Tektronix DF-A0047 Frequency: 20 MHz - 8.5 GHz. Optional: 9 kHz - 8.5 GHz. Gain: up to +17 dBi (depending on band and preamp). Polarization: horizontal or vertical (antenna rotates around the handle). Built-in preamplifier (8 - 18 dB). Built-in digital compass with USB interface. Connector: TNC(f), cable with N(m) connector included. Protection: IP56. Weight: 1.8 kg. Dimensions: 543 x 320 x 60 mm. Working temperature: from -30°С to +55°С.