Electromagnetic compatibility testers (EMC and EMI)
Tehencom company supplies components, devices and systems for testing electromagnetic compatibility (EMC) and control of the level of electromagnetic interference (EMI).
Below are the most popular EMC test equipment. Regarding prices and delivery times for the entire range of instrumentation, simply call us or write to us at E-mail and we will be happy to answer your questions.
Model | A photo | Short description |
EMC and EMI Testers of the Microrad company | ||
Microrad NHT 3DL |
Product code: 1000190 |
Microrad NHT 3DL EMI Level Meter Frequency: 0Hz - 40GHz (depending on the antenna converter) Measurement of electric and magnetic fields. Determination of compliance of radiation levels directive 2013/35/EU. Detection of short signals (5G, radars, etc.), up to 500 ns. 10.9 cm touchscreen (272 x 480 resolution). Interfaces: USB (standard); Wi-Fi, GPS, optical fiber (option). Weight: 0.65 kg. Dimensions: 170 x 85 x 31 mm. Working temperature: from -10°С to +50°С. Detection of biologically hazardous levels of electromagnetic radiation |
EMC and EMI testers of the Anritsu company | ||
Anritsu MS2712E MS2713E |
Portable spectrum analyzers Anritsu MS2712E, MS2713E Frequency: 9 kHz - 4 GHz (model MS2712E). Frequency: 9 kHz - 6 GHz (model MS2713E). Resolution (RBW): 1 Hz - 3 MHz. Amplitude: +26 dBm to -162 dBm. Built-in preamplifier (standard). Noise: -162 dBm. Bandwidth support (RBW) 200 Hz, 9 kHz, 120 kHz with quasi-peak detector for preliminary tests for electromagnetic compatibility (EMC and EMI). Standard measurements: spectrum and signal analysis, field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), carrier-to-interference ratio (C/I), AM/FM/SSB demodulation, etc. Additional options: tracking generator, 2-port frequency response analysis, channel scanner, non-stationary signal and interference analysis, mapping of coverage areas on a map, supplying constant voltage to the central core, power measurement using sensors, GPS receiver, PIM detection, AM/FM/PM analyzer, etc. . Demodulation and Analysis quality of wireless communication standards: LTE, TD-SCDMA/HSPA+, GSM/EDGE, W-CDMA/HSPA+, CDMA, EV-DO, Fixed and Mobile WiMAX, ISDB-T, DVB-T/H. Comfortable touch screen. User Interface Russified. Interfaces: USB standard, Ethernet (optional). Operating temperature range: from -10°С to +55°С. Weight: 3.5 kg. Excellent performance, portability and low price |
|
EMC and EMI testers of the Aaronia company | ||
Aaronia HF-6060 HF-6080 HF-60100 |
Product code: 1000020 |
Spectrum Analyzers HF-6060, HF-6080, HF-60100 SPECTRAN Series Frequency: 10 MHz - 6 GHz (model HF-6060). Frequency: 10 MHz - 8 GHz (model HF-6080). Frequency: 1 MHz - 9.4 GHz (model HF-60100). Resolution (RBW): 200 Hz - 50 MHz (depending on model). EMC filters: 200 Hz, 9 kHz, 120 kHz, 100 kHz, 1.5 MHz, 5 MHz. Amplitude (max.): +10 dBm, +20 dBm, +40 dBm (opt.) (depending on model). Amplitude accuracy: up to 1 dB. Noise: up to -150 dBm (with preamp). Measurements: spectrum analysis, channel power, electromagnetic compatibility (EMC) parameters, etc. Demodulation: AM, FM, PM, GSM (Depends on model). Preamplifier (option). Interfaces: USB. Weight: 420 g. |
Aaronia HF-4040 HF-4060 |
Product code: 1000021 |
Spectrum analyzers HF-4040, HF-4060 SPECTRAN series Frequency: 100 MHz - 4 GHz (model HF-4040). Frequency: 100 MHz - 6 GHz (model HF-4060). Resolution (RBW): 100 kHz - 50 MHz. Amplitude: 0 dBm to -90 dBm. Noise: -90 dBm. Amplitude accuracy: ±3 dB. Measurements: spectrum analysis, channel power, electromagnetic compatibility parameters (EMC), etc. Demodulation: AM, FM. Interfaces: USB. Weight: 420 g. |
Aaronia NF-5010 NF-5030 |
Product code: 1000022 |
Portable analyzers of electric (E) and magnetic (H) fields NF-5010, NF-5030 of the SPECTRAN NF series Frequency: 1 Hz - 1 MHz (model NF-5010). Frequency: 1Hz - 30MHz (model NF-5030). Magnetic field measurement range (H): from 0.1 nT to 2 mT. Electric field measurement range (E): 0.1 V/m to 20 kV/m. Amplitude Accuracy: ±3%. Built-in 3D magnetic field sensor. Built-in memory 64K (1M option). Remote control via USB. Interfaces: USB. Weight: 420 g. |
Aaronia NF-3010 NF-3020 |
Product code: 1000023 |
Portable analyzers of electric (E) and magnetic (H) fields NF-3010, NF-3020 of the SPECTRAN NF series Frequency: 10 Hz - 100 kHz (model NF-3010). Frequency: 10 Hz - 400 kHz (model NF-3020). Magnetic field measurement range (H): from 1 nT to 100 µT. Electric field measurement range (E): from 1 V/m to 5 kV/m. Amplitude Accuracy: ±5%. Built-in 3D magnetic field sensor. Built-in memory 64K (1M option). Remote control via USB. Interfaces: USB. Weight: 420 g. |
Aaronia MCS program |
Aaronia MCS spectrum analysis software (RAR archive) Each Aaronia spectrum analyzer comes with powerful free software that provides: - remote control and communication with instruments - work with spectrograms and time-frequency diagrams - display channels, work with patterns and masks - support for pre-tests for EMC EN55011, EN55022, etc. - and much more... |
|
Sets of equipment for EMC and EMI of the Aaronia company | ||
Aaronia EMC Bundle 1 |
Product code: 1000220 |
The EMC Bundle 1 Near Field Analyzer, Antenna, and Probe Set includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - PBS2 field probe set (up to 6 GHz) |
Aaronia EMC Bundle 2 |
Product code: 1000221 |
The EMC Bundle 2 Far Field Analyzer and Antenna Set includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - BicoLOG 30100E antenna (up to 1 GHz) |
Aaronia EMC Bundle 3 |
Product code: 1000222 |
The EMC Bundle 3 near and far field analyzers, antennas and probes includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - BicoLOG 30100E antenna (up to 1 GHz) - PBS2 field probe set ( up to 6 GHz) |
Measuring antennas of the Aaronia company | ||
Aaronia HyperLOG 7025 7040 7060 |
Aaronia HyperLOG 70 directional log-periodic antennas Frequency: 700 MHz - 2.5 GHz (model HyperLOG 7025). Frequency: 700 MHz - 4 GHz (model HyperLOG 7040). Frequency: 700 MHz - 6 GHz (model HyperLOG 7060). Gain: 4 dBi to 5 dBi (model dependent) Calibration points (in 10 MHz steps): 183 to 533 (model dependent). Maximum power: 100W (at 400MHz). Attaches to a standard tripod or handle. Suitable for measurement standards: CISPR, VDE, MIL, VG, EN 55011, EN 55013, EN 55015, EN 55022, MIL-Std-461, etc. Connector: SMA(f). Weight: 0.27 kg. Dimensions: 340 x 200 x 25 mm. Compact and inexpensive antennas for a wide range of applications |
|
Aaronia HyperLOG 6080 60100 60180 from stock |
Product code: 1000206 |
Directional log-periodic antennas Aaronia HyperLOG 6080, HyperLOG 60100, HyperLOG 60180 Frequency: 680 MHz - 8 GHz (model HyperLOG 6080). Frequency: 680 MHz - 10 GHz (model HyperLOG 60100). Frequency: 680 MHz - 18 GHz (model HyperLOG 60180). Gain: 5 dBi (typical) Over 700 calibration points (10 MHz step). Maximum power: 50W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.25 kg. Dimensions: 340 x 200 x 25 mm. |
Aaronia BicoLOG 5070 30100 20100 20300 |
Product code: 1000208 |
Biconical antennas Aaronia BicoLOG 5070, 30100, 20100 and 20300 Frequency: 50 MHz - 700 MHz (model BicoLOG 5070). Frequency: 30 MHz - 1 GHz (model BicoLOG 30100). Frequency: 20 MHz - 1 GHz (model BicoLOG 20100). Frequency: 20 MHz - 3 GHz (model BicoLOG 20300). Gain: up to 1 dBi (see graphs in pdf description). 70 to 296 calibration points in 10 MHz steps (model dependent). Maximum power: 5W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.35 kg. Dimensions: 350 x 160 x 140 mm. |
Aaronia 20300 EMI 20600 EMI |
Product code: 1000223 |
Measuring antennas for EMC and EMI testing Aaronia HyperLOG 20300 EMI, HyperLOG 20600 EMI Frequency: 20 MHz - 3 GHz (Model HyperLOG 20300 EMI). Frequency: 20 MHz - 6 GHz (Model HyperLOG 20600 EMI). Gain: 8 dBi (typical) Combines the advantages of a biconical and log-periodic antenna. Accuracy: 0.3 dB (over the entire frequency range). Over 6000 calibration points (1 MHz step). Maximum power: 310W. Connector: N(f). Weight: 6.5 kg. Dimensions: 1550 x 1400 x 650 mm. |
Near field probes of the Aaronia company | ||
Aaronia PBS1 PBS2 |
Product code: 1000224 |
Aaronia PBS1 and PBS2 Near Field Probe Sets Frequency: 1 Hz - 9 GHz. The set consists of five probes: - 50 mm magnetic field probe (H) (model PBS-H4). - 25 mm magnetic field probe (H) (model PBS-H3). - 12 mm magnetic field probe (H) (model PBS-H2). - 6 mm magnetic field probe (H) (model PBS-H1). - electric field pin probe (E) (model PBS-E1). Kit PBS2 contains additional preamplifier UBBV2 (40 dB, 1 kHz - 10 GHz). Included with each kit: mini tripod, calibration data CD, SMB(f)-SMA(m) meter cable, protective transport case. Connector: SMB(m). Each probe has a standard tripod mount. |
Measuring antennas of the Schwarzbeck company | ||
Schwarzbeck BBHA 9170 |
Product code: 1000210 |
Horn Measuring Antenna BBHA 9170 Frequency: 15 GHz - 26.5 GHz. Possible: 14 GHz - 40 GHz. Gain: 15 to 20 dBi. Directional pattern: 13-21 degrees (E-plane), 14-23 degrees (H-plane). Maximum power: 10W. Connector: SMA(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
Schwarzbeck BBHA 9120D |
Product code: 1000211 |
Horn Measuring Antenna BBHA 9120 D Frequency: 1 GHz - 18 GHz. Gain: 6 to 16 dBi. Directional pattern: 90-10 degrees (E-plane), 60-10 degrees (H-plane). Maximum power: 300W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
Schwarzbeck USLP 9143B |
Product code: 1000212 |
Log-periodic antenna USLP 9143 B Frequency: 180 MHz - 8 GHz. Gain: 4.5 to 7.1 dBi. Directional pattern: 45-65 degrees (E-plane), 90-120 degrees (H-plane). Maximum power: 200W (up to 500MHz), 50W (up to 7GHz). Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
Schwarzbeck UHALP 9108 A |
Product code: 1000213 |
Log-periodic antenna UHALP 9108 A Frequency: 250 MHz - 2.4 GHz. Gain: 2.1 to 7.7 dBi. Directional pattern: 60 degrees (E plane), 110 degrees (H plane). Maximum power: 1000W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
Schwarzbeck UBAA 9114 |
Product code: 1000214 |
UBAA 9114 Matched Antenna Holder Frequency: 30 MHz - 1000 MHz. The main characteristics depend on: installed biconical element. Maximum power: 10W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
Schwarzbeck EFS 9218 |
Product code: 1000215 |
Active Biconical Antenna EFS 9218 Frequency: 9 kHz - 300 MHz. Antenna ratio with off preamplifier: 47 dB/m (40 kHz - 250 MHz). Antenna ratio with incl. preamplifier: 20 dB/m (40 kHz - 250 MHz). Built-in preamplifier (option VV). Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
Schwarzbeck VHAP UHAP |
Product code: 1000216 |
Precision calibration dipoles VHAP, UHAP Frequency: 30 MHz - 300 MHz (model VHAP), 300 MHz - 1 GHz (UHAP model). Can be used in pairs for standard measurements CISPR 16-1-5. Each antenna comes with a detailed calibration certificate indicating the actual gain of the antenna in the frequency range, as well as a number of additional data. |
Stands for measuring antennas of the Schwarzbeck company | ||
Schwarzbeck AM9144 |
Product code: 1000225 |
Schwarzbeck AM9144 Measuring Antenna Stand Material: fiberglass. Designed for fixing measuring antennas. Neutral to radio signals. Allows you to change the height of the antenna, adjust the tilt and polarization. Universal modular design: 9 types of mounting adapters, 4 types of masts, 4 types of mast extensions, 3 types of tripods, 2 types of roller wheels. Height (depending on configuration): 0.56 to 3 meters. Weight: 5 - 7 kg. |
EMC and EMI testers of the Rohde & Schwarz company | ||
Rohde & Schwarz ESU8 ESU26 ESU40 |
Product code: 1000226 |
EMI Test Receivers R&S ESU Series Frequency: 20Hz - 8GHz (model ESU8). Frequency: 20Hz - 26.5GHz (model ESU26). Frequency: 20Hz - 40GHz (model ESU40). Intended for final tests for EMF compliance. Conforms to all commercial and military standards. Full compliance with CISPR 16-1-1. Small measurement error and excellent RF performance. All EMC detectors including CISPR-AV and CISPR-RMS. Fully automatic measurements. |
Rohde & Schwarz ESCI ESCI7 |
Product code: 1000227 |
EMI Test Receivers R&S ESCI, ESCI7 Frequency: 9 kHz - 3 GHz (ESCI model). Frequency: 9 kHz - 7 GHz (model ESCI7). Intended for final tests for EMF compliance. Total measurement error: less than 1 dB. Displayed average noise level (DANL) -155 dBm. 1dB compression point: +5dBm. RF input with surge protection. Preselection filters. Built-in 20 dB preamp. Measures electromagnetic emissions in full compliance with CISPR 16-1-1 and all commercial EMC standards. |
Rohde & Schwarz ESPI3 ESPI7 |
Product code: 1000228 |
R&S ESPI Preliminary Electromagnetic Interference (EMI) Test Receivers Frequency: 9 kHz - 3 GHz (model ESPI3). Frequency: 9 kHz - 7 GHz (model ESPI7). Intended for preliminary tests for EMF compliance. Small measurement error: less than 1.5 dB in receiver mode. High measurement speed (from 100 µs). Preselection filters and built-in 20dB preamplifier (option). Low noise level. Programmable scan tables (up to 10 subranges). |
Rohde & Schwarz ESL3 ESL6 |
Product code: 1000229 |
R&S ESL Preliminary EMI Test Receivers Frequency: 9 kHz - 3 GHz (model ESL3). Frequency: 9 kHz - 6 GHz (model ESL6). Intended for preliminary tests for EMF compliance. Resolution (RBW): 10 Hz - 10 MHz, also 200 Hz, 9 kHz, 120 kHz. Amplitude: +30 dBm to -158 dBm. Noise: -158 dBm. Two instruments in one: EMI test receiver and spectrum analyzer. |