Aaronia products
|
Tehencom company delivers spectrum analyzers, EMC analyzers, measuring antennas and other company equipment Aaronia. We offer the whole range of Aaronia products, as well as provide service, warranty and post-warranty service. Company Aaronia AG (www.aaronia.com), founded in 2003, provides low cost solutions for spectrum analysis and EMC and EMI testing. The company's flagship product is a line of very high sensitivity handheld spectrum analyzers based on proprietary, proprietary technology. Aaronia's main production facilities and development laboratories are located in Germany. |
Aaronia Distributor Certificate (343 KB)
Aaronia catalog (185 pages; 5.5 MB)
Below are the most popular models of the company's equipment Aaronia. Regarding prices and delivery times for the entire range of instrumentation, simply call us or write to us at E-mail and we will be happy to answer your questions.
| Model | A photo | Short description |
| Spectrum analyzers of the Aaronia company | ||
| Aaronia SPECTRAN V6 | 
|
Aaronia SPECTRAN V6 real-time spectrum analyzers Frequency: 10 MHz - 6 GHz, analysis band 80 MHz (Model V6-RSA250X). Frequency: 10 MHz - 6 GHz, analysis band 80 MHz, I/Q generator (Model V6-RSA500X). Frequency: 10 MHz - 6 GHz, band 2x160 MHz, I/Q generator (Model V6-RSA2000X). Resolution (RBW): 0.062 Hz - 200 MHz. Amplitude: +23 dBm to -150 dBm. Noise: -150 dBm (up to -170 dBm with internal preamp) Model V6-RSA2000X scans the entire frequency range in 5 ms. Continuous I/Q data transfer at up to 784MB/s (via two USB 3). capture lane real time: 80 MHz, 120 MHz, 160 MHz or 245 MHz. The minimum duration of an event detected with a probability of 100%: up to 10 ns. Additional options: internal preamplifier 20 dB, analysis bandwidth extension, highly stable reference oscillator OCXO (0.005 ppm), GPS receiver, etc. Interfaces: USB 3. Weight: 0.85 kg. Dimensions: 210 x 115 x 30 mm. Working temperature: from 0°С to +50°С. Extended range (option): from -40°С to +75°С. Spectrum analysis with maximum scan and detection speed |
| Aaronia HF-6060 HF-6080 HF-60100 |
Product code: 1000020 |
Spectrum analyzers HF-6060, HF-6080, HF-60100 SPECTRAN V4 series Frequency: 10 MHz - 6 GHz (model HF-6060). Frequency: 10 MHz - 8 GHz (model HF-6080). Frequency: 1 MHz - 9.4 GHz (model HF-60100). Resolution (RBW): 200 Hz - 50 MHz (depending on model). EMC filters: 200 Hz, 9 kHz, 120 kHz, 100 kHz, 1.5 MHz, 5 MHz. Amplitude (max.): +10 dBm, +20 dBm, +40 dBm (opt.) (depending on model). Amplitude accuracy: up to 1 dB. Noise: up to -150 dBm (with preamp). Measurements: spectrum analysis, channel power, electromagnetic compatibility (EMC) parameters, etc. Demodulation: AM, FM, PM, GSM (Depends on model). Preamplifier (option). Interfaces: USB. Weight: 420 g. |
| Aaronia NF-5030 |
Product code: 1000022 |
Portable Electric (E) and Magnetic (H) Field Analyzer NF-5030 SPECTRAN NF Series Frequency: 1Hz - 30MHz (model NF-5030). Magnetic field measurement range (H): from 0.1 nT to 2 mT. Electric field measurement range (E): 0.1 V/m to 20 kV/m. Amplitude Accuracy: ±3%. Built-in 3D magnetic field sensor. Built-in memory 64K (1M option). Remote control via USB. Interfaces: USB. Weight: 420 g. |
| Aaronia NF-3010 NF-3020 |
Product code: 1000023 |
Portable analyzers of electric (E) and magnetic (H) fields NF-3010, NF-3020 of the SPECTRAN NF series Frequency: 10 Hz - 100 kHz (model NF-3010). Frequency: 10 Hz - 400 kHz (model NF-3020). Magnetic field measurement range (H): from 1 nT to 100 µT. Electric field measurement range (E): from 1 V/m to 5 kV/m. Amplitude Accuracy: ±5%. Built-in 3D magnetic field sensor. Built-in memory 64K (1M option). Remote control via USB. Interfaces: USB. Weight: 420 g. |
Aaronia MCS program |
|
Aaronia MCS spectrum analysis software (RAR archive) Each Aaronia spectrum analyzer comes with powerful free software that provides: - remote control and communication with instruments - work with spectrograms and time-frequency diagrams - display channels, work with patterns and masks - support for pre-tests for EMC EN55011, EN55022, etc. - and much more... |
| High Frequency Signal Generators of the Aaronia company | ||
| Aaronia BPSG 4 BPSG 6 |
Product code: 1000162 |
High Frequency Signal Generators Aaronia BPSG Frequency: 35 MHz - 4.4 GHz (models BPSG 4 and BPSG 4 OEM). Frequency: 23.5 MHz - 6 GHz (models BPSG 6 and BPSG 6 OEM). Output power: -45 dBm to +18 dBm. Amplitude error: ±0.5 dB to ±1 dB. Phase noise at 1 GHz: -97 dBc/Hz (100 kHz offset). Analog modulation from an internal source: AM, FM, FM. Ability to store signals in internal memory and generate them offline. Operating time from built-in battery: 4 hours. Interfaces: USB. Weight: 0.15 kg. Dimensions: 81 x 61 x 29 mm. Simple and inexpensive generator with basic functions |
| Measuring antennas of the Aaronia company | ||
| Aaronia HyperLOG 7025 7040 7060 |
|
Aaronia HyperLOG 70 directional log-periodic antennas Frequency: 700 MHz - 2.5 GHz (model HyperLOG 7025). Frequency: 700 MHz - 4 GHz (model HyperLOG 7040). Frequency: 700 MHz - 6 GHz (model HyperLOG 7060). Gain: 4 dBi to 5 dBi (model dependent) Calibration points (in 10 MHz steps): 183 to 533 (model dependent). Maximum power: 100W (at 400MHz). Attaches to a standard tripod or handle. Suitable for measurement standards: CISPR, VDE, MIL, VG, EN 55011, EN 55013, EN 55015, EN 55022, MIL-Std-461, etc. Connector: SMA(f). Weight: 0.27 kg. Dimensions: 340 x 200 x 25 mm. Compact and inexpensive antennas for a wide range of applications |
| Aaronia HyperLOG 6080 60100 60180 |
Product code: 1000206 |
Directional log-periodic antennas Aaronia HyperLOG 6080, HyperLOG 60100, HyperLOG 60180 Frequency: 680 MHz - 8 GHz (model HyperLOG 6080). Frequency: 680 MHz - 10 GHz (model HyperLOG 60100). Frequency: 680 MHz - 18 GHz (model HyperLOG 60180). Gain: 5 dBi (typical) Over 700 calibration points (10 MHz step). Maximum power: 50W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.25 kg. Dimensions: 340 x 200 x 25 mm. |
| Aaronia HyperLOG 4025X 4040X 4060X |
Product code: 1000207 |
Active directional log-periodic antennas Aaronia HyperLOG 4025X, HyperLOG 4040X, HyperLOG 4060X Frequency: 400 MHz - 2.5 GHz (model HyperLOG 4025X). Frequency: 400 MHz - 4 GHz (model HyperLOG 4040X). Frequency: 400 MHz - 6 GHz (model HyperLOG 4060X). Gain: 44 dBi (typical) Over 200 calibration points (10 MHz step). PC interface: USB. 1/4" tripod mount. Connector: SMA(f). Weight: 1.4 kg. Dimensions: 590 x 360 x 30 mm. |
| Aaronia BicoLOG 5070 30100 20100 20300 |
Product code: 1000208 |
Biconical antennas Aaronia BicoLOG 5070, 30100, 20100 and 20300 Frequency: 50 MHz - 700 MHz (model BicoLOG 5070). Frequency: 30 MHz - 1 GHz (model BicoLOG 30100). Frequency: 20 MHz - 1 GHz (model BicoLOG 20100). Frequency: 20 MHz - 3 GHz (model BicoLOG 20300). Gain: up to 1 dBi (see graphs in pdf description). 70 to 296 calibration points in 10 MHz steps (model dependent). Maximum power: 5W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.35 kg. Dimensions: 350 x 160 x 140 mm. |
| Aaronia ELF-2 ELF-6 LF-2 LF-6 |
Product code: 1000235 |
Directional active magnetic field antennas Aaronia MagnoTRACKER Frequency: 1 Hz - 9 kHz (Model MagnoTRACKER ELF-2). Frequency: 1 Hz - 9 kHz (Model MagnoTRACKER ELF-6). Frequency: 9 kHz - 1 MHz (model MagnoTRACKER LF-2). Frequency: 9 kHz - 1 MHz (Model MagnoTRACKER LF-6). Built-in preamplifier: 25dB typical, 35dB optional. The LF-2 and LF-6 models allow selective frequency tuning. Very high sensitivity and directivity with minimal weight. Connector: SMA(f). Operating time from the built-in LiPo accumulator: 3 – 4 hours. Dimensions: 260 x 320 x 110 mm (models ELF-2 and LF-2). Dimensions: 660 x 320 x 110 mm (models ELF-6 and LF-6). Weight: from 3 to 9 kg (depending on the model). Working temperature: from -20°С to +60°С. The Ideal Antenna for Finding Ultra-Low Frequency Sources |
| Aaronia MDF 560 MDF 9400 MDF 930X MDF 960X MDF 50400X |
|
Aaronia MDF Directional Magnetic Loop Antennas Frequency: 500 kHz - 60 MHz (passive model MDF 560). Frequency: 9 kHz - 400 MHz (passive model MDF 9400). Frequency: 9 kHz - 30 MHz (active model MDF 930X). Frequency: 9 kHz - 60 MHz (active model MDF 960X). Frequency: 500 kHz - 400 MHz (active model MDF 50400X). Detachable preamps: 35dB (MDF 930X), 25dB (MDF 960X) and 40dB (MDF 50400X). High sensitivity and directivity. Connector: SMA(f). Dimensions: 180 x 180 x 50 mm (models MDF 560 and MDF 9400). Dimensions: 180 x 180 x 85 mm (MDF 930X, MDF 960X and MDF 50400X models). Weight: 0.18 kg or 0.36 kg (depending on model). Working temperature: from -40°С to +60°С. Universal antennas for searching and measuring magnetic fields |
| Aaronia 20300 EMI 20600 EMI |
Product code: 1000223 |
Measuring antennas for EMC and EMI testing Aaronia HyperLOG 20300 EMI, HyperLOG 20600 EMI Frequency: 20 MHz - 3 GHz (Model HyperLOG 20300 EMI). Frequency: 20 MHz - 6 GHz (Model HyperLOG 20600 EMI). Gain: 8 dBi (typical) Combines the advantages of a biconical and log-periodic antenna. Accuracy: 0.3 dB (over the entire frequency range). Over 6000 calibration points (1 MHz step). Maximum power: 310W. Connector: N(f). Weight: 6.5 kg. Dimensions: 1550 x 1400 x 650 mm. |
| Aaronia IsoLOG 3D |
Product code: 1000209 |
Multisection antenna (antenna array) Aaronia IsoLOG 3D Frequency: 9 kHz - 6, 20 or 40 GHz (models IsoLOG 3D 80-UWB and IsoLOG 3D 160-UWB). Frequency: 680 MHz - 6, 20 or 40 GHz (models IsoLOG 3D 80 and IsoLOG 3D 160). The array contains from 16 to 48 antennas. Number of detection sectors: 8 or 16. Full 360° monitoring without rotating parts. Switching speed between antennas: up to 1 µs. Built-in real time clock and GPS (option). Connector: N(f). Management interface: Ethernet. Control program included. Weight: 20 - 23 kg. Dimensions: 950 x 950 x 300 mm. Working temperature: from -30°С to +60°С. |
| Near field probes of the Aaronia company | ||
| Aaronia PBS1 PBS2 |
Product code: 1000224 |
Aaronia PBS1 and PBS2 Near Field Probe Sets Frequency: 1 Hz - 9 GHz. The set consists of five probes: - 50 mm magnetic field probe (H) (model PBS-H4). - 25 mm magnetic field probe (H) (model PBS-H3). - 12 mm magnetic field probe (H) (model PBS-H2). - 6 mm magnetic field probe (H) (model PBS-H1). - electric field pin probe (E) (model PBS-E1). Kit PBS2 contains additional preamplifier UBBV2 (40 dB, 1 kHz - 10 GHz). Included with each kit: mini tripod, calibration data CD, SMB(f)-SMA(m) meter cable, protective transport case. Connector: SMB(m). Each probe has a standard tripod mount. |
| Equipment sets for EMC and EMI of the Aaronia company | ||
| Aaronia EMC Bundle 1 |
Product code: 1000220 |
The EMC Bundle 1 Near Field Analyzer, Antenna, and Probe Set includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - PBS2 field probe set (up to 6 GHz) |
| Aaronia EMC Bundle 2 |
Product code: 1000221 |
The EMC Bundle 2 Far Field Analyzer and Antenna Set includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - BicoLOG 30100E antenna (up to 1 GHz) |
| Aaronia EMC Bundle 3 |
Product code: 1000222 |
The EMC Bundle 3 near and far field analyzers, antennas and probes includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - BicoLOG 30100E antenna (up to 1 GHz) - PBS2 field probe set ( up to 6 GHz) |