ITECH IT6700H high voltage laboratory power supply series

Brief description of the series
The ITECH IT6700H series of high-voltage laboratory DC power supplies is an indispensable tool for generating high voltage (up to 1 200 V) with low ripple and noise. Models of this series have a wide range of useful features: high accuracy and high resolution (up to 10 mV and up to 10 mA), output voltage change mode according to the list of values (up to 150 steps), 4-wire connection, all types of protection (from overvoltage, overcurrent and overheating), quiet cooling fan with automatic speed control, manual and software control, plus all popular communication interfaces (USB, IEEE-488 and RS-232).
The ITECH IT6700H series includes 17 models of high-voltage power supplies with voltages up to 1 200 V, currents up to 220 A, and maximum output power up to 3 kW. For detailed differences between the series models, see the interactive table. A full description of all the characteristics, as well as a driver for LabVIEW can be downloaded below on this page in the Documentation section.
All models of the series
The ITECH IT6700H series consists of seventeen models, which are presented in this interactive table. You can sort by any of the characteristics by simply clicking on its name in the table. To see all the characteristics of certain models, add them to the comparison.
Model |
Maximum output power (DC)
|
Maximum output voltage (DC)
|
Maximum output current (DC)
|
Voltage resolution (DC)
|
Current resolution (DC)
|
Number of channels (DC)
|
Operating principle
|
Weight
|
---|---|---|---|---|---|---|---|---|
400 W | 80 V | 20 A | 10 mV | 10 mA | 1 | Switching | 4 kg | |
Top sales
|
400 W | 80 V | 20 A | 10 mV | 10 mA | 1 | Switching | 4 kg |
Expert's choice
|
850 W | 80 V | 40 A | 10 mV | 10 mA | 1 | Switching | 6 kg |
850 W | 150 V | 20 A | 100 mV | 10 mA | 1 | Switching | 6 kg | |
850 W | 32 V | 110 A | 10 mV | 10 mA | 1 | Switching | 6 kg | |
850 W | 600 V | 5 A | 100 mV | 10 mA | 1 | Switching | 6 kg | |
850 W | 300 V | 10 A | 100 mV | 10 mA | 1 | Switching | 6 kg | |
1 500 W | 80 V | 40 A | 10 mV | 10 mA | 1 | Switching | 6 kg | |
1 500 W | 150 V | 20 A | 100 mV | 10 mA | 1 | Switching | 6 kg | |
1 500 W | 32 V | 110 A | 10 mV | 10 mA | 1 | Switching | 6 kg | |
1 500 W | 600 V | 5 A | 100 mV | 10 mA | 1 | Switching | 6 kg | |
1 500 W | 300 V | 10 A | 100 mV | 10 mA | 1 | Switching | 6 kg | |
3 000 W | 160 V | 40 A | 100 mV | 10 mA | 1 | Switching | 16 kg | |
3 000 W | 32 V | 220 A | 10 mV | 10 mA | 1 | Switching | 16 kg | |
3 000 W | 600 V | 10 A | 100 mV | 10 mA | 1 | Switching | 16 kg | |
3 000 W | 1 200 V | 5 A | 100 mV | 10 mA | 1 | Switching | 16 kg | |
3 000 W | 300 V | 20 A | 100 mV | 10 mA | 1 | Switching | 16 kg |
Video review of the series
This video review presents two models of laboratory power supplies of the IT6700H series, which are manufactured by ITECH company. These are the IT6723 model with voltage up to 80 V, current up to 40 A and maximum output power up to 850 W, as well as model IT6723C with voltage up to 32 V, current up to 110 A and maximum output power up to 850 W. It also talks about more powerful models, designed for 1.5 kW and 3 kW. After watching this video, you will get a complete understanding of the main features and design features of the IT6700H series.
Extended voltage and current range
All models in the IT6700H series have an extended voltage and current range for excellent versatility. In this case, the maximum value of the output power is automatically limited to a certain level. Such volt-ampere characteristic of a laboratory power supply significantly increases the operating range of voltage and current ratings.
For example, one IT6724H high voltage power supply (300 V, 10 A, 1 500 W) can replace three standard power supplies: (300 V, 5 A), (250 V, 6 A), and (150 V, 10 A). For clarity, below is shown the operating area of the IT6724H model in which 1500 W of output power is provided. Read more about how this feature works here: voltage and current value range.

List mode
In addition to the standard operating mode, high-voltage power supplies of the ITECH IT6700H series have the ability to automatically change the output voltage according to a list of values predefined by the user. This list can include up to 150 different values, each of which determines the output voltage and the time during which this voltage must be generated. The minimum duration of each step is 0.1 seconds and the maximum is 9 999 seconds. The figure below shows an example of such work. Read more about this feature here: list mode.

Case design
Power supplies of the IT6700H series with a maximum output power of 850 W and 1 500 W are made in a compact desktop case weighing 6 kg, and power supplies with a power of 400 W in the same case, but less deep and weighing 4 kg. With the optional accessory IT-E151, all of these models can be rack-mounted in only half the rack width and 1U height.
Connection terminals are located on the front panel and for most models are also duplicated on the rear panel. The type of terminals depends on the voltage and current: closed type for high-voltage models, powerful terminals for models with high current and classic terminals for models with a power of 400 W. Overall dimensions and design features are shown in the figure below.

Power supplies of the IT6700H series with a maximum output power of 3 000 W are made in a 16 kg desktop-rack case. The connection terminals are located on the rear panel and are covered with a protective cover. Overall dimensions and design features are shown in the figure below.

Additional accessories
-
ITECH IT-E30110-BYOn order Expert's choice
A pair of cables for power supplies and electronic loads. Length 1 meter, current up to 10 A, tips: banana plug - U type terminal.
From 2 202 UAH
-
ITECH IT-E30110-BBOn order
A pair of cables for power supplies and electronic loads. Length 1 meter, current up to 10 A, tips: banana plug - banana plug.
From 2 202 UAH
-
ITECH IT-E30110-ABOn order
A pair of cables for power supplies and electronic loads. Length 1 meter, current up to 10 A, tips: banana plug - alligator clip.
From 2 202 UAH
-
ITECH IT-E30320-YYOn order
A pair of cables for power supplies and electronic loads. Length 2 meters, current up to 30 A, tips: U type terminal - U type terminal.
From 1 764 UAH
-
ITECH IT-E30615-OOOn order Expert's choice
A pair of cables for power supplies and electronic loads. Length 1.5 meters, current up to 60 A, tips: ring terminal - ring terminal.
From 2 424 UAH
-
ITECH IT-E31220-OOOn order
A pair of cables for power supplies and electronic loads. Length 2 meters, current up to 120 A, tips: ring terminal - ring terminal.
From 9 684 UAH
-
ITECH IT-E32420-OOOn order
A pair of cables for power supplies and electronic loads. Length 2 meters, current up to 240 A, tips: ring terminal - ring terminal.
From 13 200 UAH
-
ITECH IT-E151On order
Rack mount kit for ITECH laboratory power supplies.
From 3 744 UAH
Documentation and useful materials
-
Description and characteristics of the ITECH IT6700H series
EN, 3 pages, 1 MB
-
User manual of the ITECH IT6700H series
EN, 59 pages, 3 MB
-
Programming guide of the ITECH IT6700H series
EN, 46 pages, 0.6 MB
-
LabVIEW driver for ITECH IT6700H series
EN, release date 2021-11, 0.4 MB