Dual channel power supply - electronic load up to 90W ITECH IT6412

SHORT DESCRIPTION

Unique device IT6412 companies ITECH Can be used as a bipolar power supply or as a bipolar electronic load. In addition, the built-in simulator of batteries, accumulators and chargers is especially in demand in the production and high-speed testing of portable equipment powered by batteries such as smartphones, wireless devices, Bluetooth headsets, tablets, digital cameras, GPS receivers, RFIC power amplifiers and many others. . The very fast transient response time (50 µs) ensures that the voltage and current on the IT6412 outputs rise quickly, eliminating spurious noise. From useful features ITECH IT6412 It is also worth emphasizing the voltage and current waveform viewing mode - the built-in oscilloscope. You can download a full description of all the characteristics below on this page in the section Documentation.

Main characteristics:
Channel 1 (two bands): ±15 V, ±3 A, up to 45 W or: ±9 V, ±5 A, up to 45 W.
Channel 2 (two bands): 0-15V, ±3 A, up to 45 W or: 0-9V, ±5 A, up to 45 W.
Number of channels: 2. Voltage rise time: up to 500 µs.
Very high accuracy and high resolution (1 mV and 0.1 mA).
Built-in digital voltmeter and oscilloscope. Electronic load mode.
Built-in tester-simulator of batteries, accumulators and chargers.
Possibility of compensating the voltage drop in the connection wires.
The mode of changing the output voltage and current according to the list of set values.
Automatic protection: against overvoltage, overcurrent and overheating.
Interfaces: USB, Ethernet, IEEE-488.2 (GPIB). Weight: 9 kg.
Dimensions: 226 x 88 x 476 mm. Working temperature: from 0°С to +40°С.
Dual Channel Power Supply - Electronic Load - Battery Tester

Also, we recommend to see the full list of modern laboratory power supplies and detailed selection guide optimal laboratory power supply.

Video review of the ITECH IT6412 dual-channel multifunctional power supply

This video overview shows the two main modes of operation ITECH IT6412: Power supply and electric battery simulation function. This plot also shows the graphical user interface of this instrument, the convenience and visibility of which can reduce the time for selecting initial settings and configuring tests.

ITECH IT6412 battery tester-simulator mode

Power supply - electronic load ITECH IT6412 can produce and consume current, as well as change its output resistance in the range from 0 to 1 ohm. These features allow IT6412 to be effectively used as a tester-simulator of batteries, accumulators and chargers. In this case, it is possible to carry out various charge-discharge cycles, as well as to measure the characteristics of these cycles.

View mode of the voltage and current waveform at the output of the ITECH IT6412 device

Among the useful features of the power supply - electronic load ITECH IT6412 it is worth paying attention to the built-in oscilloscope, which allows you to see the waveform at the device terminals in real time. The image of the signals can be stored in the device's memory for documentation.

The design of the power supply - electronic load ITECH IT6412

Power supply - electronic load ITECH IT6412 housed in a compact laboratory case equipped with a 10.9 cm color screen (with a resolution of 480 x 270). The device comes standard with interfaces: USB, Ethernet, IEEE-488.2 (GPIB). Weight of the device: 9 kg. Dimensions: 226 x 88 x 476 mm. Working temperature: from 0°С to +40°С. The photo below shows a view of the rear panel of the ITECH IT6412. The green terminals provide the ability to compensate for voltage drops in the connection wires.