A series of powerful laboratory power supplies up to 30 kW ITECH IT6500

SHORT DESCRIPTION

Powerful single-channel laboratory DC power supplies series ITECH IT6500 - more than 100 models providing maximum power (up to 30 kW in one device). For even greater application versatility, all models in the series allow any combination of voltage and current within its maximum capacity. In total, the ITECH IT6500 series includes 113 models of power supplies with various combinations of output voltage (up to 1,000 V), current (up to 1,200 A) and maximum allowable power (from 800 W to 30,000 W). Modifications IT65xxC contain these additional features: mode electronic load, variable output resistance, fast response of the output stage (on and off in 3 ms). You can download a full description of all the characteristics below on this page in the section Documentation.

Main characteristics:
Voltage: up to 80 V, current: up to 60 A, power: up to 800 W (model IT6502D).
Voltage: up to 80 V, current: up to 60 A, power: up to 1,200 W (models IT6512 and IT6512A).
Voltage: up to 150 V, current: up to 30 A, power: up to 1,200 W (models IT6513 and IT6513A).

Voltage: up to 80 V, current: up to 120 A, power: up to 1,800 W (models IT6512C and IT6512D).
Voltage: up to 200 V, current: up to 30 A, power: up to 1,800 W (models IT6513C and IT6513D).
Voltage: up to 360 V, current: up to 30 A, power: up to 1,800 W (models IT6514C and IT6514D).
Voltage: up to 500 V, current: up to 20 A, power: up to 1,800 W (models IT6515C and IT6515D).
Voltage: up to 750 V, current: up to 15 A, power: up to 1,800 W (models IT6516C and IT6516D).
Voltage: up to 1,000 V, current: up to 10 A, power: up to 1,800 W (models IT6517C and IT6517D).

Voltage: up to 80 V, current: up to 120 A, power: up to 3,000 W (models IT6522C and IT6522D).
Voltage: up to 200 V, current: up to 60 A, power: up to 3,000 W (models IT6523C and IT6523D).
Voltage: up to 360 V, current: up to 30 A, power: up to 3,000 W (models IT6524C and IT6524D).
Voltage: up to 500 V, current: up to 20 A, power: up to 3,000 W (models IT6525C and IT6525D).
Voltage: up to 750 V, current: up to 15 A, power: up to 3,000 W (models IT6526C and IT6526D).
Voltage: up to 1,000 V, current: up to 10 A, power: up to 3,000 W (models IT6527C and IT6527D).

Voltage: up to 80 V, current: up to 240 A, power: up to 6,000 W (models IT6532C and IT6532D).
Voltage: up to 200 V, current: up to 120 A, power: up to 6,000 W (models IT6533C and IT6533D).
Voltage: up to 360 V, current: up to 60 A, power: up to 6,000 W (models IT6534C and IT6534D).
Voltage: up to 500 V, current: up to 40 A, power: up to 6,000 W (models IT6535C and IT6535D).
Voltage: up to 750 V, current: up to 30 A, power: up to 6,000 W (models IT6536C and IT6536D).
Voltage: up to 1,000 V, current: up to 20 A, power: up to 6,000 W (models IT6537C and IT6537D).

Voltage: up to 80 V, current: up to 360 A, power: up to 9,000 W (models IT6542C and IT6542D).
Voltage: up to 200 V, current: up to 180 A, power: up to 9,000 W (models IT6543C and IT6543D).
Voltage: up to 360 V, current: up to 90 A, power: up to 9,000 W (models IT6544C and IT6544D).
Voltage: up to 500 V, current: up to 60 A, power: up to 9,000 W (models IT6545C and IT6545D).
Voltage: up to 750 V, current: up to 45 A, power: up to 9,000 W (models IT6546C and IT6546D).
Voltage: up to 1,000 V, current: up to 30 A, power: up to 9,000 W (models IT6547C and IT6547D).

Voltage: up to 80 V, current: up to 480 A, power: up to 12,000 W (models IT6552C and IT6552D).
Voltage: up to 200 V, current: up to 240 A, power: up to 12,000 W (models IT6553C and IT6553D).
Voltage: up to 360 V, current: up to 120 A, power: up to 12,000 W (models IT6554C and IT6554D).
Voltage: up to 500 V, current: up to 80 A, power: up to 12,000 W (models IT6555C and IT6555D).
Voltage: up to 750 V, current: up to 60 A, power: up to 12,000 W (models IT6556C and IT6556D).
Voltage: up to 1,000 V, current: up to 40 A, power: up to 12,000 W (models IT6557C and IT6557D).

Voltage: up to 80 V, current: up to 600 A, power: up to 15,000 W (models IT6562C and IT6562D).
Voltage: up to 200 V, current: up to 300 A, power: up to 15,000 W (models IT6563C and IT6563D).
Voltage: up to 360 V, current: up to 150 A, power: up to 15,000 W (models IT6564C and IT6564D).
Voltage: up to 500 V, current: up to 100 A, power: up to 15,000 W (models IT6565C and IT6565D).
Voltage: up to 750 V, current: up to 75 A, power: up to 15,000 W (models IT6566C and IT6566D).
Voltage: up to 1,000 V, current: up to 50 A, power: up to 15,000 W (models IT6567C and IT6567D).

Voltage: up to 80 V, current: up to 840 A, power: up to 21,000 W (models IT6572C and IT6572D).
Voltage: up to 200 V, current: up to 420 A, power: up to 21,000 W (models IT6573C and IT6573D).
Voltage: up to 360 V, current: up to 210 A, power: up to 21,000 W (models IT6574C and IT6574D).
Voltage: up to 500 V, current: up to 140 A, power: up to 21,000 W (models IT6575C and IT6575D).
Voltage: up to 750 V, current: up to 105 A, power: up to 21,000 W (models IT6576C and IT6576D).
Voltage: up to 1,000 V, current: up to 70 A, power: up to 21,000 W (models IT6577C and IT6577D).

Voltage: up to 80 V, current: up to 960 A, power: up to 24,000 W (models IT6582C and IT6582D).
Voltage: up to 200 V, current: up to 480 A, power: up to 24,000 W (models IT6583C and IT6583D).
Voltage: up to 360 V, current: up to 240 A, power: up to 24,000 W (models IT6584C and IT6584D).
Voltage: up to 500 V, current: up to 160 A, power: up to 24,000 W (models IT6585C and IT6585D).
Voltage: up to 750 V, current: up to 120 A, power: up to 24,000 W (models IT6586C and IT6586D).
Voltage: up to 1,000 V, current: up to 80 A, power: up to 24,000 W (models IT6587C and IT6587D).

Voltage: up to 80 V, current: up to 1 200 A, power: up to 30,000 W (models IT6592C and IT6592D).
Voltage: up to 200 V, current: up to 600 A, power: up to 30,000 W (models IT6593C and IT6593D).
Voltage: up to 360 V, current: up to 300 A, power: up to 30,000 W (models IT6594C and IT6594D).
Voltage: up to 500 V, current: up to 200 A, power: up to 30,000 W (models IT6595C and IT6595D).
Voltage: up to 750 V, current: up to 150 A, power: up to 30,000 W (models IT6596C and IT6596D).
Voltage: up to 1,000 V, current: up to 100 A, power: up to 30,000 W (models IT6597C and IT6597D).

Any combination of voltage and current is allowed within the maximum power.
Number of channels: 1. High precision and high resolution (10mV and 10mA).
Possibility of compensating the voltage drop in the connection wires.
Automatic overload protection modes: OVP, UVP, OCP, OPP, OTP.
Additional features for all IT65xxC models: electronic load mode, variable output impedance, fast response (turn on and off in 3ms).
Models IT6512, IT6513 and all models IT65xxC can generate transients in accordance with DIN40839 and ISO-16750-2 automotive standards.
Automatic control of cooling fans to reduce noise.
Interfaces: USB, Ethernet, IEEE-488.2 (GPIB), RS-232, RS-485, CAN.
Weight: 8.5 - 284 kg (varies by model). Working temperature: from 0°С to +40°С.
Powerful sources with a wide range of features

Need power up to 1 152 kW and voltage up to 2 250 V? Watch the series ITECH IT6000C.
You need a powerful power supply, but cheaper? Watch the series ITECH IT6700H.
Need power supply AC voltage? Watch the series ITECH IT7300.
Would you like to see the whole list? See complete list of laboratory power supplies.
Difficult to decide on a model? See the guide: how to choose a laboratory power supply.

Choose the best power supply from 113 models in the ITECH IT6500 series

Series innovation and versatility ITECH IT6500 allow you to successfully solve any task of testing power devices: auto electronics, batteries and accumulators, solar panels, LEDs, high-power semiconductor devices and much more.

The lowest power model in the series (IT6502D at 800W) and four models at 1200W (IT6512, IT6512A, IT6513 and IT6513A) can be described as: good performance and compact body, designed for general use in the laboratory and in production.

All models from 1800W to 30kW D (models IT65xxD) can be described as: high performance with stable output voltage and current, designed for automotive, green energy, high-speed testing, high power testing and other similar applications in the laboratory and in production.

All models from 1800 W to 30 kW with letter C (Models IT65xxC) - this is most functional modifications that can be characterized as follows: smooth (without jumps) transition from the power supply mode to the electronic load mode, multifunctional models with a fast response of the output stage. These power supplies are designed for applications that require both generation and consumption of power. For example: automotive electronics, simulation of the current-voltage characteristics of solar panels, motors controlled by constant voltage, batteries and similar tasks.

Stress tests of equipment that correspond to real conditions as closely as possible

Generating powerful DC voltage and current is only one of the tasks that can be solved with the help of ITECH IT6500 series power sources. However, most equipment testing involves applying to the device under test imperfect signals, as similar as possible to those that exist in reality: jumps and ripples of the supply voltage, short-term power outages, a smooth increase or decrease in current, uniform ripples when charging batteries, the formation of voltage with a given internal resistance of the source, and many others.

All of these complex test scenarios can easily be completed with the IT6500 series. Designed for this mode of changing the output voltage and current according to the list of set values. In this mode, the user can set the voltage and current values, as well as the duration of each step. The list of values itself can be written to the IT6500 source using the keyboard of the device itself or created using software. In this way, almost any kind of test can be implemented. Learn more about working on a list of values see here.

The four figures below show some typical uses of the list-of-values mode.

Adjustable output impedance on IT6500C models

In the IT6500 series, all models with the letter C have the ability to provide a given value of its output resistance. The resistance range varies from 0 to several ohms and depends on the specific model. This feature is in great demand in battery discharge and charge tests, since a real battery always has a finite internal resistance, which, moreover, depends on various parameters of the battery itself.

Carrying out tests for compliance with automotive standards DIN40839 and ISO-16750-2

All automotive electronics should function normally during dips and power surges caused by engine starts and stops. To unify such tests, two international standards are used: DIN 40839 and ISO-16750-2. Models IT6512, IT6513 and all models IT65xxC contain a built-in set of test transients in full compliance with these standards, which will allow you to quickly and efficiently test the operation of any automotive electronics. Both voltages used in the automotive industry are supported: 12V and 24V.

Design Features of ITECH IT6500 Power Supply Series

The low-power models of the ITECH IT6500 series at 800 W, 1200 W, 1800 W and 3000 W are made in an instrument case that can be placed on a laboratory bench or mounted in a standard rack. As an example, the photo below shows the IT6523D with a maximum output of 3kW.

Powerful models of the ITECH IT6500 series (from 6 kW to 30 kW)made according to the modular principle and consist of one 3 kW control unit and one or more power expansion modules (each also 3 kW). As an example, the photo below shows the IT6532D model with a maximum output power of 6 kW, which consists of two modules: a three-kilowatt generation and control module (top) and a three-kilowatt power increase module (bottom). Accordingly, the 30 kW models consist of one 3 kW generation and control module and nine power expansion modules (each 3 kW).

The photo below shows the rear panel of the IT6532D with a maximum output of 6kW. On top is a three-kilowatt generation and control module. Under it is a three-kilowatt power increase module. The modules are connected by a powerful power bus (called Source Output in the photo). Above the power bus is a green connector (Remote Sense) to compensate for voltage drops in the connection wires. Synchronous operation of the modules and uniform load distribution between them is performed using the system control bus (System Bus on the left in the photo).

Pay attention to the plug (Load Output), located between the cooling fans. All models with the letter C (IT65xxC models) replace this plug with a connector to control the operation of external IT-E500 series power absorption modules, which can be used to increase the absorbed power up to 90 kW when the IT65xxC power supplies are operating in the electronic load.