Anritsu MS2080A series of handheld spectrum analyzers

Novelty

Brief description of the series

The Anritsu MS2080A series of handheld spectrum analyzers combines all the popular instruments most commonly used in the frequency range up to 6 GHz. In addition to the classic spectrum analyzer, the following are available: real-time analysis, antenna and RF cable analysis, accurate power measurement, search for interference sources, mapping coverage areas and much more.

The Anritsu MS2080A series includes 2 models of spectrum analyzers with a frequency range of 9 kHz – 4 GHz and 9 kHz – 6 GHz. For detailed differences between the series models, see the interactive table. A full description of all the characteristics can be downloaded below on this page in the Documentation section.

All models of the series

The Anritsu MS2080A series consists of two models, which are presented in this interactive table. To see all the characteristics of certain models, add them to the comparison.

Main characteristics of Anritsu MS2080A series models
Model	Spectrum analysis	Signal analysis bandwidth	Real-time analysis bandwidth	Maximum amplitude	Average noise DANL	Weight
Novelty MS2080A-0704	9 kHz – 4 GHz	20 MHz, 40 MHz	20 MHz, 40 MHz	+30 dBm	-161 dBm, -167 dBm	3.8 kg
Novelty Expert selection MS2080A-0706	9 kHz – 6 GHz	20 MHz, 40 MHz	20 MHz, 40 MHz	+30 dBm	-161 dBm, -167 dBm	3.8 kg

Classic spectrum analysis mode

Anritsu company has been developing portable spectrum analyzers for over 20 years. During this time, a lot of experience has been accumulated, which is implemented in the Anritsu MS2080A series. This is evident both from the characteristics of the devices (noise -167 dBm, amplitude accuracy of 0.5 dB, scanning speed up to 45 GHz per second) and from the convenient user interface, thought out to the smallest detail. This screenshot shows the analyzer screen with three spectra (each spectrum has a different detector type) and five markers.

Anritsu MS2080A screen in classic spectrum analyzer mode — All the functions of a classic swept-tuned spectrum analyzer.

Real-time spectrum analysis

The MS2080A series models come standard as classic swept-tuned spectrum analyzers. With the MS2080A-0199 option, they have real-time spectrum analysis capability with 20 MHz bandwidth. If option MS2080A-0102 is also installed, the real-time analysis bandwidth increases to 40 MHz. This mode is very useful for detecting rapid signal changes or single pulses lasting a few microseconds.

Search for interference sources

The presence of the MS2080A-0024 option and the additional Anritsu MA2700A Interference Hunter antenna holder greatly simplifies the search for radio signal sources. The Anritsu MA2700A antenna holder connects to a spectrum analyzer via USB, contains a GPS receiver, an electronic compass and a preamplifier with an on/off button. This photo shows the exterior of the MA2700A Interference Hunter along with the MS2080A series analyzer.

Anritsu MS2080A together with Anritsu MA2700A antenna holder — Signal source direction finding using Anritsu MA2700A Interference Hunter.

Option MS2080A-0024 includes AM/FM audio demodulation of interference signals, audio signal for interference direction finding and geolocation of interference sources on a digital map. This screenshot shows the analyzer screen with a map of the area, on which the location of the signal source is marked using three bearings.

Anritsu MS2080A screen in interference source search mode — Geolocation of a signal source on a digital map using three bearings.

Antenna analysis

Connecting the optional Anritsu S331P USB meter to the Anritsu MS2080A spectrum analyzers allows you to analyze antennas and RF cables in the frequency range from 150 kHz to 6 GHz. The following types of measurements are supported: SWR, Return loss, distance to fault in the cable and others. This photo shows the Anritsu S331P USB meter along with the calibration element.

Anritsu MS2080A together with Anritsu S331P antenna analyzer — Antenna analysis using the optional Anritsu S331P meter.

Power measurement

With option MS2080A-0019 and an optional USB sensor, the Anritsu MS2080A series spectrum analyzers can perform accurate RF power measurements. Three series of sensors are supported: MA241xxA, MA242xxA and MA243xxA. Depending on the sensor type, power measurement accuracy can reach 0.1 dB at signal frequencies up to 50 GHz.

As an example, this photo shows an Anritsu MA24340A USB sensor with the following characteristics: frequency 10 MHz – 40 GHz, power -70 dBm – +20 dBm, uncertainty 0.15 dB – 0.21 dB.

Anritsu MS2080A together with Anritsu MA24340A power sensor — Accurate measurement of signal power using optional USB sensors.

Additional options

Anritsu MS2080A-0199
Product code: 1025006
On order Expert selection

Adds real-time analysis capability with 20 MHz bandwidth. If option MS2080A-0102 is also installed, the real-time analysis bandwidth is 40 MHz.

Price on request
Anritsu MS2080A-0024
Product code: 1025002
On order Expert selection

Interference finder. Includes AM/FM audio demodulation of interfering signals, interference hunting tone for direction finding and geolocation of interferes on a digital map.

Price on request
Anritsu MS2080A-0031

Product code: 1025003
On order Expert selection

GNSS (GPS) receiver. Provides binding of measurements to coordinates, and also increases the accuracy of the internal reference generator. Supports systems: GPS, GLONASS and Galileo.

Price on request
Anritsu MS2080A-0102

Product code: 1025005
On order

40 MHz analysis bandwidth. Increases signal analysis bandwidth from 20 MHz to 40 MHz. If option MS2080A-0199 is also installed, the real-time analysis bandwidth will increase to 40 MHz.

Price on request
Anritsu MS2080A-0509

Product code: 1025011
On order

AM/FM modulation measurements. Includes a wide range of functions for measuring the characteristics of analog transmitters with amplitude and frequency modulation.

Price on request
Anritsu MS2080A-0888

Product code: 1025013
On order

5G NR downlink measurements. Includes a wide range of functions for measuring the performance of 5G networks. Requires option MS2080A-0031.

Price on request
Anritsu MS2080A-0883

Product code: 1025012
On order

LTE FDD/TDD measurements. Includes a wide range of functions for measuring the performance of LTE networks. Requires option MS2080A-0031.

Price on request
Anritsu MS2080A-0431

Product code: 1025009
On order

Mapping coverage areas of 5G and LTE networks using various metrics: RSSI, RSRP, RSRQ, SINR, etc. Requires option MS2080A-0031.

Price on request
Anritsu MS2080A-0444

Product code: 1025010
On order

Support for external 2000-1800-R, 2000-1792-R and 2000-1791-R isotropic antennas for accurate electric field strength measurements in the frequency range from 9 kHz to 6 GHz.

Price on request
Anritsu MS2080A-0019
Product code: 1025001
On order

Support for external USB sensors of the MA241xxA, MA242xxA and MA243xxA series for accurate signal power measurements up to 50 GHz.

Price on request
Anritsu MS2080A-0090

Product code: 1025004
On order

Gated sweep. Allows to synchronize sweep with a certain event so that the analyzer collects data at the appropriate time.

Price on request
Anritsu MS2080A-0400

Product code: 1025007
On order

The ability to remotely control the spectrum analyzer using Vision software for long-term, automated measurements.

Price on request
Anritsu MS2080A-0407

Product code: 1025008
On order

Possibility of automatic scanning using Vision software of a large number of spectral channels.

Price on request

Additional accessories

Aaronia HyperLOG 7060
Product code: 1070003
On order Top sales

Directional log periodic antenna. Frequency range from 700 MHz to 6 GHz. Typical gain 5 dBi. Connector SMA(f). Dimensions: 340 x 200 x 25 mm. Weight 270 grams.

From 28 602 UAH
Aaronia HyperLOG 7040
Product code: 1070002
On order Top sales

Directional log periodic antenna. Frequency range from 700 MHz to 4 GHz. Typical gain 4 dBi. Connector SMA(f). Dimensions: 340 x 200 x 25 mm. Weight 270 grams.

From 19 800 UAH
Aaronia BicoLOG 20300
Product code: 1070010
On order

Directional biconical antenna. Frequency range from 20 MHz to 3 GHz. Typical gain from -38 dBi to 1 dBi. Connector SMA(f). Dimensions: 350 x 160 x 140 mm. Weight 350 grams.

From 123 204 UAH
Aaronia BicoLOG 30100
Product code: 1070008
On order Top salesExpert selection

Directional biconical antenna. Frequency range from 30 MHz to 1 GHz. Typical gain from -39 dBi to 1 dBi. Connector SMA(f). Dimensions: 350 x 160 x 140 mm. Weight 350 grams.

From 46 200 UAH
Aaronia MDF 9400
Product code: 1070012
On order Top salesExpert selection

Directional passive loop antenna for magnetic field. Frequency range from 9 kHz to 400 MHz. Maximum gain -60 dBi. Connector SMA(f). Dimensions: 180 x 180 x 50 mm. Weight 180 grams.

From 39 600 UAH
Aaronia MDF 50400X
Product code: 1070015
On order

Directional active loop antenna for magnetic field. Frequency range from 500 kHz to 400 MHz. Maximum gain -20 dBi. Connector SMA(f). Dimensions: 180 x 180 x 85 mm. Weight 360 grams.

From 99 000 UAH
Aaronia 501/006

Product code: 1080002
On order Top sales

High frequency cable. Connectors SMA(m) – SMA(m). Length 1 meter. Up to 6 GHz, 50 Ohm. Attenuation at 6 GHz: 3 dB/m. Maximum VSWR at 6 GHz: 1.3. Convenient plastic nuts.

From 1 896 UAH
Aaronia 501/053

Product code: 1080003
On order Expert selection

High frequency cable. Connectors SMA(m) – SMA(m). Length 2 meters. Up to 26 GHz, 50 Ohm. Attenuation 2.6 dB/m. Maximum VSWR at 6 GHz: 1.1. Convenient plastic nuts.

From 7 920 UAH
Aaronia 501/054

Product code: 1080004
On order

High frequency cable. Connectors SMA(m) – SMA(m). Length 5 meters. Up to 26 GHz, 50 Ohm. Attenuation 2.6 dB/m. Maximum VSWR at 6 GHz: 1.1. Convenient plastic nuts.

From 11 442 UAH
Aaronia 501/055

Product code: 1080005
On order

High frequency cable. Connectors SMA(m) – SMA(m). Length 10 meters. Up to 26 GHz, 50 Ohm. Attenuation 2.6 dB/m. Maximum VSWR at 6 GHz: 1.1. Convenient plastic nuts.

From 14 520 UAH
Aaronia 502/009

Product code: 1080001
On order

High frequency adapter. Connectors SMA(f) – N(m). Up to 18 GHz, 50 Ohm. Dimensions: 30 x 20 x 20 mm.

From 1 584 UAH

Documentation and useful materials

Documentation

Need help choosing equipment?

To simplify the process of choosing the optimal set of equipment, you can use our experience and recommendations. We have more than 20 years of practical supply experience and we can immediately answer many questions about models, options, terms, prices and discounts. This will save your time and money. To do this, just contact us or order a free consultation and we will be happy to answer your questions.