EMC antennas and field probes
Measuring antennas and electromagnetic field probes usually used in conjunction with spectrum analyzers for solving problems of radio monitoring, optimization of coverage areas of wireless base stations, maintenance of mobile communication stations, checking for compliance with electromagnetic compatibility (EMC) requirements and many other tasks.
Tehencom company supplies a large number of types of measuring antennas: log-periodic, biconical, horn, frame, omni, dipole, logo-spiral, etc. Also supplied are electromagnetic field probes and microwave accessories microwave accessories.
All models of EMC and EMI antennas
The table below shows the most popular measuring antennas and electromagnetic field probes. Regarding prices and delivery times for the entire range of instrumentation, simply call us or write to us at E-mail and we will be happy to answer your questions.
| Model | A photo | Short description |
| Measuring antennas of the Anritsu company | ||
| Anritsu 2000-18xx-R |
Product code: 1000234 |
Anritsu 2000-18xx-R Directional Horn Antennas Frequency: 17.6 GHz - 26.7 GHz (Model 2000-1867-R). Frequency: 26.4 GHz - 40.1 GHz (Model 2000-1868-R). Frequency: 33.0 GHz - 50.1 GHz (Model 2000-1869-R). Frequency: 39.3 GHz - 59.7 GHz (Model 2000-1870-R). Frequency: 49.9 GHz - 75.8 GHz (Model 2000-1871-R). Frequency: 60.0 GHz - 90.0 GHz (Model 2000-1872-R). Frequency: 75.0 GHz - 110.0 GHz (Model 2000-1873-R). Gain: 25 dBi (typical) Connectors (depending on model): WR42, WR28, WR22, WR19, WR15, WR12, WR10. There are adapters from waveguide to coaxial connectors type K, V or W. The widest range of horn antennas |
| Anritsu 2000-1617 |
Product code: 1000218 |
Wide-range log-periodic antenna 2000-1617 Frequency: 600 MHz - 21 GHz. Gain: -5 to 8 dBi (up to 12 GHz), 0 to 6 dBi (up to 21 GHz) Directional pattern: 70 degrees (E plane), 125 degrees (H plane). Maximum power: 10W. Connector: N(f). |
| Anritsu 2000-1616 |
Product code: 1000217 |
Wide Range Omnidirectional Antenna 2000-1616 Frequency: 20 MHz - 21 GHz. Gain: -7 to 0 dBi. Polarization: vertical / non-directional. Maximum power: 10W. Connector: N(f). |
| Measuring antennas of the Tektronix company | ||
| Tektronix DF-A0047 |
Product code: 1000219 |
Directional antenna Tektronix DF-A0047 Frequency: 20 MHz - 8.5 GHz. Optional: 9 kHz - 8.5 GHz. Gain: up to +17 dBi (depending on band and preamp). Polarization: horizontal or vertical (antenna rotates around the handle). Built-in preamplifier (8 - 18 dB). Built-in digital compass with USB interface. Connector: TNC(f), cable with N(m) connector included. Protection: IP56. Weight: 1.8 kg. Dimensions: 543 x 320 x 60 mm. Working temperature: from -30°С to +55°С. |
| Measuring log-periodic antennas of the Aaronia company | ||
| Aaronia HyperLOG 7025 7040 7060 |
|
Aaronia HyperLOG 70 directional log-periodic antennas Frequency: 700 MHz - 2.5 GHz (model HyperLOG 7025). Frequency: 700 MHz - 4 GHz (model HyperLOG 7040). Frequency: 700 MHz - 6 GHz (model HyperLOG 7060). Gain: 4 dBi to 5 dBi (model dependent) Calibration points (in 10 MHz steps): 183 to 533 (model dependent). Maximum power: 100W (at 400MHz). Attaches to a standard tripod or handle. Suitable for measurement standards: CISPR, VDE, MIL, VG, EN 55011, EN 55013, EN 55015, EN 55022, MIL-Std-461, etc. Connector: SMA(f). Weight: 0.27 kg. Dimensions: 340 x 200 x 25 mm. Compact and inexpensive antennas for a wide range of applications |
| Aaronia HyperLOG 6080 60100 60180 |
Product code: 1000206 |
Directional log-periodic antennas Aaronia HyperLOG 6080, HyperLOG 60100, HyperLOG 60180 Frequency: 680 MHz - 8 GHz (model HyperLOG 6080). Frequency: 680 MHz - 10 GHz (model HyperLOG 60100). Frequency: 680 MHz - 18 GHz (model HyperLOG 60180). Gain: 5 dBi (typical) Over 700 calibration points (10 MHz step). Maximum power: 50W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.25 kg. Dimensions: 340 x 200 x 25 mm. |
| Aaronia HyperLOG 4025X 4040X 4060X |
Product code: 1000207 |
Active directional log-periodic antennas Aaronia HyperLOG 4025X, HyperLOG 4040X, HyperLOG 4060X Frequency: 400 MHz - 2.5 GHz (model HyperLOG 4025X). Frequency: 400 MHz - 4 GHz (model HyperLOG 4040X). Frequency: 400 MHz - 6 GHz (model HyperLOG 4060X). Gain: 44 dBi (typical) Over 200 calibration points (10 MHz step). PC interface: USB. 1/4" tripod mount. Connector: SMA(f). Weight: 1.4 kg. Dimensions: 590 x 360 x 30 mm. |
| Measuring biconical antennas of the Aaronia company | ||
| Aaronia BicoLOG 5070 30100 20100 20300 |
Product code: 1000208 |
Biconical antennas Aaronia BicoLOG 5070, 30100, 20100 and 20300 Frequency: 50 MHz - 700 MHz (model BicoLOG 5070). Frequency: 30 MHz - 1 GHz (model BicoLOG 30100). Frequency: 20 MHz - 1 GHz (model BicoLOG 20100). Frequency: 20 MHz - 3 GHz (model BicoLOG 20300). Gain: up to 1 dBi (see graphs in pdf description). 70 to 296 calibration points in 10 MHz steps (model dependent). Maximum power: 5W. 1/4" tripod mount. Connector: SMA(f). Weight: 0.35 kg. Dimensions: 350 x 160 x 140 mm. |
| Measuring antennas for the magnetic field of the Aaronia company | ||
| Aaronia ELF-2 ELF-6 LF-2 LF-6 |
Product code: 1000235 |
Directional active magnetic field antennas Aaronia MagnoTRACKER Frequency: 1 Hz - 9 kHz (Model MagnoTRACKER ELF-2). Frequency: 1 Hz - 9 kHz (Model MagnoTRACKER ELF-6). Frequency: 9 kHz - 1 MHz (model MagnoTRACKER LF-2). Frequency: 9 kHz - 1 MHz (Model MagnoTRACKER LF-6). Built-in preamplifier: 25dB typical, 35dB optional. The LF-2 and LF-6 models allow selective frequency tuning. Very high sensitivity and directivity with minimal weight. Connector: SMA(f). Operating time from the built-in LiPo accumulator: 3 – 4 hours. Dimensions: 260 x 320 x 110 mm (models ELF-2 and LF-2). Dimensions: 660 x 320 x 110 mm (models ELF-6 and LF-6). Weight: from 3 to 9 kg (depending on the model). Working temperature: from -20°С to +60°С. The Ideal Antenna for Finding Ultra-Low Frequency Sources |
| Aaronia MDF 560 MDF 9400 MDF 930X MDF 960X MDF 50400X |
|
Aaronia MDF Directional Magnetic Loop Antennas Frequency: 500 kHz - 60 MHz (passive model MDF 560). Frequency: 9 kHz - 400 MHz (passive model MDF 9400). Frequency: 9 kHz - 30 MHz (active model MDF 930X). Frequency: 9 kHz - 60 MHz (active model MDF 960X). Frequency: 500 kHz - 400 MHz (active model MDF 50400X). Detachable preamps: 35dB (MDF 930X), 25dB (MDF 960X) and 40dB (MDF 50400X). High sensitivity and directivity. Connector: SMA(f). Dimensions: 180 x 180 x 50 mm (models MDF 560 and MDF 9400). Dimensions: 180 x 180 x 85 mm (MDF 930X, MDF 960X and MDF 50400X models). Weight: 0.18 kg or 0.36 kg (depending on model). Working temperature: from -40°С to +60°С. Universal antennas for searching and measuring magnetic fields |
| Combined antennas of the Aaronia company | ||
| Aaronia 20300 EMI 20600 EMI |
Product code: 1000223 |
Measuring antennas for EMC and EMI testing Aaronia HyperLOG 20300 EMI, HyperLOG 20600 EMI Frequency: 20 MHz - 3 GHz (Model HyperLOG 20300 EMI). Frequency: 20 MHz - 6 GHz (Model HyperLOG 20600 EMI). Gain: 8 dBi (typical) Combines the advantages of a biconical and log-periodic antenna. Accuracy: 0.3 dB (over the entire frequency range). Over 6000 calibration points (1 MHz step). Maximum power: 310W. Connector: N(f). Weight: 6.5 kg. Dimensions: 1550 x 1400 x 650 mm. |
| Aaronia IsoLOG 3D |
Product code: 1000209 |
Multisection antenna (antenna array) Aaronia IsoLOG 3D Frequency: 9 kHz - 6, 20 or 40 GHz (models IsoLOG 3D 80-UWB and IsoLOG 3D 160-UWB). Frequency: 680 MHz - 6, 20 or 40 GHz (models IsoLOG 3D 80 and IsoLOG 3D 160). The array contains from 16 to 48 antennas. Number of detection sectors: 8 or 16. Full 360° monitoring without rotating parts. Switching speed between antennas: up to 1 µs. Built-in real time clock and GPS (option). Connector: N(f). Management interface: Ethernet. Control program included. Weight: 20 - 23 kg. Dimensions: 950 x 950 x 300 mm. Working temperature: from -30°С to +60°С. |
| Near field probes of the Aaronia company | ||
| Aaronia PBS1 PBS2 |
Product code: 1000224 |
Aaronia PBS1 and PBS2 Near Field Probe Sets Frequency: 1 Hz - 9 GHz. The set consists of five probes: - 50 mm magnetic field probe (H) (model PBS-H4). - 25 mm magnetic field probe (H) (model PBS-H3). - 12 mm magnetic field probe (H) (model PBS-H2). - 6 mm magnetic field probe (H) (model PBS-H1). - electric field pin probe (E) (model PBS-E1). Kit PBS2 contains additional preamplifier UBBV2 (40 dB, 1 kHz - 10 GHz). Included with each kit: mini tripod, calibration data CD, SMB(f)-SMA(m) meter cable, protective transport case. Connector: SMB(m). Each probe has a standard tripod mount. |
| Equipment sets for EMC and EMI of the Aaronia company | ||
| Aaronia EMC Bundle 1 |
Product code: 1000220 |
The EMC Bundle 1 Near Field Analyzer, Antenna, and Probe Set includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - PBS2 field probe set (up to 6 GHz) |
| Aaronia EMC Bundle 2 |
Product code: 1000221 |
The EMC Bundle 2 Far Field Analyzer and Antenna Set includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - BicoLOG 30100E antenna (up to 1 GHz) |
| Aaronia EMC Bundle 3 |
Product code: 1000222 |
The EMC Bundle 3 near and far field analyzers, antennas and probes includes: - HF-60100 analyzer (1 MHz - 9.4 GHz) - NF-5030 analyzer (1 Hz - 1 MHz) - HyperLOG 60100 antenna (up to 10 GHz) - BicoLOG 30100E antenna (up to 1 GHz) - PBS2 field probe set ( up to 6 GHz) |
| Measuring antennas of the Schwarzbeck company | ||
| Schwarzbeck BBHA 9120D |
Product code: 1000211 |
Horn Measuring Antenna BBHA 9120 D Frequency: 1 GHz - 18 GHz. Gain: 6 to 16 dBi. Directional pattern: 90-10 degrees (E-plane), 60-10 degrees (H-plane). Maximum power: 300W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
| Schwarzbeck BBHA 9170 |
Product code: 1000210 |
Horn Measuring Antenna BBHA 9170 Frequency: 15 GHz - 26.5 GHz. Possible: 14 GHz - 40 GHz. Gain: 15 to 20 dBi. Directional pattern: 13-21 degrees (E-plane), 14-23 degrees (H-plane). Maximum power: 10W. Connector: SMA(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
| Schwarzbeck USLP 9143B |
Product code: 1000212 |
Log-periodic antenna USLP 9143 B Frequency: 180 MHz - 8 GHz. Gain: 4.5 to 7.1 dBi. Directional pattern: 45-65 degrees (E-plane), 90-120 degrees (H-plane). Maximum power: 200W (up to 500MHz), 50W (up to 7GHz). Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
| Schwarzbeck UHALP 9108 A |
Product code: 1000213 |
Log-periodic antenna UHALP 9108 A Frequency: 250 MHz - 2.4 GHz. Gain: 2.1 to 7.7 dBi. Directional pattern: 60 degrees (E plane), 110 degrees (H plane). Maximum power: 1000W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
| Schwarzbeck UBAA 9114 |
Product code: 1000214 |
UBAA 9114 Matched Antenna Holder Frequency: 30 MHz - 1000 MHz. The main characteristics depend on: installed biconical element. Maximum power: 10W. Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
| Schwarzbeck EFS 9218 |
Product code: 1000215 |
Active Biconical Antenna EFS 9218 Frequency: 9 kHz - 300 MHz. Antenna ratio with off preamplifier: 47 dB/m (40 kHz - 250 MHz). Antenna ratio with incl. preamplifier: 20 dB/m (40 kHz - 250 MHz). Built-in preamplifier (option VV). Connector: N(f). Each antenna comes with an individual calibration certificate indicating the actual gain of the antenna in the frequency range. |
| Schwarzbeck VHAP UHAP |
Product code: 1000216 |
Precision calibration dipoles VHAP, UHAP Frequency: 30 MHz - 300 MHz (model VHAP), 300 MHz - 1 GHz (UHAP model). Can be used in pairs for standard measurements CISPR 16-1-5. Each antenna comes with a detailed calibration certificate indicating the actual gain of the antenna in the frequency range, as well as a number of additional data. |
| Stands for measuring antennas of the Schwarzbeck company | ||
| Schwarzbeck AM9144 |
Product code: 1000225 |
Schwarzbeck AM9144 Measuring Antenna Stand Material: fiberglass. Designed for fixing measuring antennas. Neutral to radio signals. Allows you to change the height of the antenna, adjust the tilt and polarization. Universal modular design: 9 types of mounting adapters, 4 types of masts, 4 types of mast extensions, 3 types of tripods, 2 types of roller wheels. Height (depending on configuration): 0.56 to 3 meters. Weight: 5 - 7 kg. |
Help in choosing equipment
Choose and buy inexpensive and high quality measuring antenna is not always easy. When choosing a model, in addition to the standard parameters: antenna type, frequency range, radiation pattern and gain, additional characteristics and capabilities of the antenna must be taken into account: the type of polarization, the presence of a preamplifier, the maximum power, the type of attachment, the presence of a protective transport case, the operating temperature range, the quality and durability of the antenna, the reputation of the manufacturer, the professionalism and reliability of the supplier, the availability of after-sales service, the warranty period and much more.
In addition, you may need technical advice on additional accessories: tripods, RF cables, waveguides, adapters, etc.
Of course, you can make a complete set yourself, using the materials of our website, or you can send us a request in advance on E-mail with a description of the technical requirements and call us to briefly discuss your task. We have over 20 years of practical supply experience and can immediately answer many questions about models, options, delivery times, prices and discounts. This will save your time and money.