Alternating voltage and current source ITECH IT-M7723D, 300 V, 7.5 A, 750 VA

NoveltyExpert selection
ITECH IT-M7700 series typical laboratory AC power supply
ITECH IT-M7700 series typical laboratory AC power supply (side view 1)
ITECH IT-M7700 series typical laboratory AC power supply (side view 2)
ITECH IT-M7700 series typical laboratory AC power supply (side view 3)
ITECH IT-M7700 series typical laboratory AC power supply (back view)
ITECH IT-M7700 series typical laboratory AC power supply (side view 4)
ITECH IT-M7700 series typical laboratory AC power supply (side view 5)
ITECH IT-M7700 series typical laboratory AC power supply (side view 6)
Power network surges generation with ITECH IT-M7700
Power network dips generation with ITECH IT-M7700
PC software for remote control of ITECH IT-M7700
ITECH IT-M7700 series typical laboratory AC power supply
ITECH IT-M7700 series typical laboratory AC power supply (side view 1)
ITECH IT-M7700 series typical laboratory AC power supply (side view 2)
ITECH IT-M7700 series typical laboratory AC power supply (side view 3)
ITECH IT-M7700 series typical laboratory AC power supply (back view)
ITECH IT-M7700 series typical laboratory AC power supply (side view 4)
ITECH IT-M7700 series typical laboratory AC power supply (side view 5)
ITECH IT-M7700 series typical laboratory AC power supply (side view 6)
Power network surges generation with ITECH IT-M7700
Power network dips generation with ITECH IT-M7700
PC software for remote control of ITECH IT-M7700
On order

Product code: 3020155

Price on request

Main characteristics

  • Manufacturer:
    ITECH (Taiwan) Official representative
  • Category:
  • Series:
  • Output voltage type:
  • Number of phases (AC):
    1
  • Maximum output voltage (AC):
    300 V (RMS)
  • Maximum output current (AC):
    7.5 A (RMS)
  • Maximum output power (AC):
    750 VA
  • Voltage resolution (AC):
    100 mV (RMS)
  • Current resolution (AC):
    0.1 mA (RMS)
  • Number of channels (DC):
  • Maximum output voltage (DC):
    400 V
  • Maximum output current (DC):
    7.5 A
  • Maximum output power (DC):
    750 W
  • Operating principle:
  • 4-wire sensing:
    Yes
  • Protection modes:
    Short circuit protection, Current protection (OCP), Voltage protection (OVP, UVP), Power protection (OPP), Temperature protection (OTP)
  • Built-in devices:
    Multimeter (DMM), Generator
  • Peculiarities:
  • Connection to computer:
    USB, Ethernet (LAN), GPIB (IEEE-488.2), CAN, RS-232, RS-485
  • Operating temperature:
    From 0°С to +40°С
  • Width:
    215 mm
  • Height:
    88 mm
  • Depth:
    450 mm
  • Weight:
    9 kg

Product description

ITECH IT-M7723D is a single-phase AC voltage and current power source. It contains a built-in arbitrary waveform generator, which allows you to generate both pure sinusoidal signals and all kinds of distortions, including harmonics, surges, dips, complex noise, etc. In addition, this model has a peak-to-rms current ratio of 6, while other models in the ITECH IT-M7700 series have a ratio of 3.

The IT-M7723D AC power source can supply up to 300 Volts RMS at currents up to 7.5 Amps RMS and maximum apparent power up to 750 VA. The weight of the device is 9 kg with dimensions of 215 x 88 x 450 mm. Remote control can be performed using a free program or using the LabVIEW driver, which can be downloaded below on this page in the Documentation section.

For more information about this product, see the ITECH IT-M7700 series page

Contents of delivery

  • single-phase alternating voltage and current source ITECH IT-M7723D (1 pc.)
  • power cable (1 pc.)
  • user manual in electronic form
  • 1 year warranty