Alternating voltage and current source ITECH IT-M7722, 300 V, 6 A, 600 VA

AC power supply ITECH IT-M7722
ITECH IT-M7700 series typical laboratory AC power supply (side view 1)
ITECH IT-M7700 series typical laboratory AC power supply (side view 2)
ITECH IT-M7700 series typical laboratory AC power supply (side view 3)
ITECH IT-M7700 series typical laboratory AC power supply (back view)
ITECH IT-M7700 series typical laboratory AC power supply (side view 4)
ITECH IT-M7700 series typical laboratory AC power supply (side view 5)
ITECH IT-M7700 series typical laboratory AC power supply (side view 6)
Case design of alternating current sources ITECH IT-M7700
Power network surges generation with ITECH IT-M7700
Power network dips generation with ITECH IT-M7700
PC software for remote control of ITECH IT-M7700
AC power supply ITECH IT-M7722
ITECH IT-M7700 series typical laboratory AC power supply (side view 1)
ITECH IT-M7700 series typical laboratory AC power supply (side view 2)
ITECH IT-M7700 series typical laboratory AC power supply (side view 3)
ITECH IT-M7700 series typical laboratory AC power supply (back view)
ITECH IT-M7700 series typical laboratory AC power supply (side view 4)
ITECH IT-M7700 series typical laboratory AC power supply (side view 5)
ITECH IT-M7700 series typical laboratory AC power supply (side view 6)
Case design of alternating current sources ITECH IT-M7700
Power network surges generation with ITECH IT-M7700
Power network dips generation with ITECH IT-M7700
PC software for remote control of ITECH IT-M7700
On order

Product code: 3020044

Price on request

Main characteristics

  • Manufacturer:
    ITECH (Taiwan) Official representative
  • Category:
  • Series:
  • Output voltage type:
  • Number of phases (AC):
    1
  • Maximum output voltage (AC):
    300 V (RMS)
  • Maximum output current (AC):
    6 A (RMS)
  • Maximum output power (AC):
    600 VA
  • Voltage resolution (AC):
    100 mV (RMS)
  • Current resolution (AC):
    0.1 mA (RMS)
  • Number of channels (DC):
  • Maximum output voltage (DC):
    400 V
  • Maximum output current (DC):
    6 A
  • Maximum output power (DC):
    600 W
  • Operating principle:
  • 4-wire sensing:
    Yes
  • Protection modes:
    Power protection (OPP) Temperature protection (OTP) Short circuit protection Current protection (OCP) Voltage protection (OVP, UVP)
  • Built-in devices:
    Multimeter (DMM) Generator
  • Peculiarities:
  • Connection to computer:
    USB Ethernet (LAN) GPIB (IEEE-488.2) CAN RS-232 RS-485
  • Operating temperature:
    From 0°С to +40°С
  • Width:
    215 mm
  • Height:
    44 mm
  • Depth:
    450 mm
  • Weight:
    5 kg

Product description

ITECH IT-M7722 is a compact single-phase AC voltage and current power source. It contains a built-in arbitrary waveform generator, which allows you to generate both pure sinusoidal signals and all kinds of distortions, including harmonics, surges, dips, complex noise, etc. In addition, it is possible to add a constant component to the output voltage (AC + DC mode).

The IT-M7722 AC power source can supply up to 300 Volts RMS at currents up to 6 Amps RMS and maximum apparent power up to 600 VA. The weight of the device is 5 kg with dimensions of 215 x 44 x 450 mm. Remote control can be performed using a free program or using the LabVIEW driver, which can be downloaded below on this page in the Documentation section. Model IT-M7721 is part of the ITECH IT-M7700 series.

For more information about this product, see the ITECH IT-M7700 series page

Contents of delivery

  • single-phase alternating voltage and current source ITECH IT-M7722 (1 pc.)
  • power cable (1 pc.)
  • user manual in electronic form
  • 1 year warranty