Dual-range DC power supply ITECH IT6861B, 20 V, 5 A, 100 W or 8 V, 9 A, 72 W

ITECH IT6800AB series dual-range DC power supply (front view)
ITECH IT6800AB series dual-range DC power supply (side view 1)
ITECH IT6800AB series dual-range DC power supply (side view 2)
ITECH IT6800AB series dual-range DC power supply (side view 3)
ITECH IT6800AB series dual-range DC power supply (back view)
ITECH IT6800AB series dual-range DC power supply (side view 4)
ITECH IT6800AB series dual-range DC power supply (side view 5)
ITECH IT6800AB series dual-range DC power supply (side view 6)
Screenshot of ITECH PV6800AB software
ITECH IT6800AB series dual-range DC power supply (front view)
ITECH IT6800AB series dual-range DC power supply (side view 1)
ITECH IT6800AB series dual-range DC power supply (side view 2)
ITECH IT6800AB series dual-range DC power supply (side view 3)
ITECH IT6800AB series dual-range DC power supply (back view)
ITECH IT6800AB series dual-range DC power supply (side view 4)
ITECH IT6800AB series dual-range DC power supply (side view 5)
ITECH IT6800AB series dual-range DC power supply (side view 6)
Screenshot of ITECH PV6800AB software
Check availability

Product code: 3020175

From 27 822 UAH

Main characteristics

  • Manufacturer:
    ITECH (Taiwan) Official representative
  • Category:
  • Series:
  • Output voltage type:
  • Number of channels (DC):
  • Maximum output voltage (DC):
    20 V 8 V
  • Maximum output current (DC):
    5 A 9 A
  • Maximum output power (DC):
    100 W 72 W
  • Voltage resolution (DC):
    1 mV
  • Current resolution (DC):
    0.1 mA
  • Operating principle:
  • 4-wire sensing:
    Yes
  • Protection modes:
    Short circuit protection Current protection (OCP) Voltage protection (OVP, UVP) Temperature protection (OTP)
  • Built-in devices:
    Multimeter (DMM)
  • Peculiarities:
  • Connection to computer:
    USB RS-232 GPIB (IEEE-488.2)
  • Operating temperature:
    From 0°С to +40°С
  • Width:
    215 mm
  • Height:
    88 mm
  • Depth:
    355 mm
  • Weight:
    8.5 kg

Product description

ITECH IT6861B is a linear (transformer) dual-range laboratory DC power supply 20 V, 5 A, 100 W or 8 V, 9 A, 72 W. The presence of two independent ranges significantly expands the possibilities of using this power supply. The voltage resolution is 1 mV, and the current resolution is 0.1 mA. To increase accuracy at high currents, it is possible to connect to the load using a 4-wire circuit. Thanks to the linear stabilization method, a clean output voltage without ripple is ensured.

For connection to a computer, the ITECH IT6861B laboratory power supply contains USB, RS-232 and GPIB (IEEE-488.2) interfaces. Remote control is performed using the PV6800AB program, which can be downloaded below on this page in the Documentation section. A programming manual and driver for LabVIEW are also available for download. Model IT6861B is part of the ITECH IT6800AB series. The series has a model IT6861A with similar characteristics, which does not contain the additional GPIB (IEEE-488.2) computer interface.

For more information about this product, see the ITECH IT6800AB series page

Contents of delivery

  • laboratory power supply ITECH IT6861B (1 pc.)
  • power cable (1 pc.)
  • user manual in electronic form
  • calibration certificate
  • 1 year warranty