Dual-range DC power supply ITECH IT6874B, 150 V, 1.2 A, 180 W or 60 V, 2 A, 120 W
Product code: 3020180
From 36 942 UAH
Main characteristics
-
Manufacturer:ITECH (Taiwan) Official representative
-
Category:
-
Series:
-
Output voltage type:
-
Number of channels (DC):
-
Maximum output voltage (DC):150 V 60 V
-
Maximum output current (DC):1.2 A 2 A
-
Maximum output power (DC):180 W 120 W
-
Voltage resolution (DC):1 mV 10 mV
-
Current resolution (DC):0.1 mA
-
Operating principle:
-
4-wire sensing:Yes
-
Protection modes:Short circuit protection Current protection (OCP) Voltage protection (OVP, UVP) Temperature protection (OTP)
-
Built-in devices:Multimeter (DMM)
-
Peculiarities:
-
Connection to computer:USB RS-232 GPIB (IEEE-488.2)
-
Operating temperature:From 0°С to +40°С
-
Width:215 mm
-
Height:88 mm
-
Depth:355 mm
-
Weight:8.5 kg
Product description
ITECH IT6874B is a linear (transformer) dual-range laboratory DC power supply 150 V, 1.2 A, 180 W or 60 V, 2 A, 120 W. The presence of two independent ranges significantly expands the possibilities of using this power supply. The current resolution is 0.1 mA, and the voltage resolution is 1 mV (up to 100 V) and 10 mV (at 100 V or more). To increase accuracy at high currents, it is possible to connect to the load using a 4-wire circuit. Thanks to the linear stabilization method, a clean output voltage without ripple is ensured.
For connection to a computer, the ITECH IT6874B laboratory power supply contains USB, RS-232 and GPIB (IEEE-488.2) interfaces. Remote control is performed using the PV6800AB program, which can be downloaded below on this page in the Documentation section. A programming manual and driver for LabVIEW are also available for download. Model IT6874B is part of the ITECH IT6800AB series. The series has a model IT6874A with similar characteristics, which does not contain the additional GPIB (IEEE-488.2) computer interface.
For more information about this product, see the ITECH IT6800AB series pageContents of delivery
- laboratory power supply ITECH IT6874B (1 pc.)
- power cable (1 pc.)
- user manual in electronic form
- calibration certificate
- 1 year warranty