Digital oscilloscopes from 10 MHz to 100 MHz

This section presents our proposed digital oscilloscopes with a bandwidth of 100 MHz or less. To simplify the choice, a brief description of the features of each series in which there are such models is given, this will help you understand how some series differ from others, and which oscilloscope model is better to buy. All oscilloscopes are divided into groups: 100 MHz, 70, 60 and 50 MHz, 30 and 25 MHz, 20 MHz and 10 MHz.

At the bottom of this page is comparison table, in which all oscilloscope models are sorted in increasing bandwidth from 10 MHz to 100 MHz, indicating their main characteristics: the number of channels, sampling rate, memory size, and others.

If you are choosing your first oscilloscope and are not very familiar with their types and characteristics, we recommend reading this article: Choosing a digital oscilloscope - a detailed guide.

Section filters "Buy an oscilloscope":
Bandwidth: 100 MHz or less, 200 MHz, 300 MHz, 500 MHz, 1 GHz or more.
Subsections: USB oscilloscopes, best models, all models, comparison, Video reviews, basic theory.
Articles and reviews: how to choose an oscilloscope, digital phosphor technology, power supply development.

Digital oscilloscopes 100 MHz

The most functional series in which there are models with a bandwidth of 100 MHz is Tektronix MDO3. This series of digital oscilloscopes are equipped with a large 1920 x 1080 dot touch screen and an innovative user interface. A feature of the MDO3 series is the presence of a full-fledged spectrum analyzer with a separate RF input. In addition, at any time the bandwidth of these oscilloscopes can be extended up to 500 MHz with a simple software key activation.

Model	A photo	Short description
The most feature-packed series with 100 MHz bandwidth oscilloscopes
Tektronix MDO32 MDO34	Add to cart Product code: 1000404	Oscilloscopes with built-in spectrum analyzer, oscillator, logic analyzer, protocol analyzer, voltmeter and frequency counter Tektronix MDO3 series from 100 MHz to 1 GHz 100 MHz, 2.5 GS/s, 2 channels (model MDO32-BW-100). 100 MHz, 2.5 GS/s, 4 channels (model MDO34-BW-100). 200 MHz, 2.5 GS/s, 2 channels (Model MDO32-BW-200). 200 MHz, 2.5 GS/s, 4 channels (Model MDO34-BW-200). 350 MHz, 2.5 GS/s, 2 channels (Model MDO32-BW-350). 350 MHz, 2.5 GS/s, 4 channels (Model MDO34-BW-350). 500 MHz, 2.5 GS/s, 2 channels (Model MDO32-BW-500). 500 MHz, 2.5 GS/s, 4 channels (Model MDO34-BW-500). 1 GHz, 5 GS/s, 2 channels (Model MDO32-BW-1000). 1 GHz, 5 GS/s, 4 channels (Model MDO34-BW-1000). Record length: 10 million points to the channel. Vertical resolution: 8 bits (11 bits in high resolution mode). Sensitivity: 1 mV/div to 10 V/div with calibrated fine tuning. Continuous waveform capture rate: up to 280,000 waveforms/s. Built-in Spectrum Analyzer: 9 kHz - 1 GHz (option 3-SA1), 9 kHz - 3 GHz (option 3-SA3). Built-in digital voltmeter and frequency counter (included as standard). Additional options: built-in generator of standard and arbitrary signals, built-in logic analyzer for 16 digital channels, protocol analyzer: I2C, SPI, RS-232/422/485/UART, USB 2.0, CAN, LIN, FlexRay, MILSTD-1553, audio buses and others. 29.5 cm touchscreen (1920 x 1080 resolution). Interfaces: USB, Ethernet, HDMI. Weight: 7.9 kg. Dimensions: 370 x 252 x 149 mm. Working temperature: from 0°С to +55°С. An indispensable tool in the design, debugging and repair of modern complex electronic systems

Slightly simpler oscilloscopes up to 100 MHz are in series Tektronix MSO2000 and Tektronix DPO2000. These are very high quality oscilloscopes with wide functionality, including DPO digital phosphor technology (up to 5,000 waveforms/s). The MSOs are mixed signal oscilloscopes and come standard with logic analyzer for 16 digital channels.

Model	A photo	Short description
A simpler series that has 100 MHz bandwidth oscilloscopes
Tektronix MSO2012 MSO2014 MSO2024 DPO2012 DPO2014 DPO2024	Add to cart Product code: 1000411	Tektronix MSO2000 and DPO2000 Series Digital Phosphor Mixed Signal Oscilloscopes with 100 MHz and 200 MHz bandwidth 100 MHz, 1 GS/s, 2 channels + 16 digital channels (model MSO2012). 100 MHz, 1 GS/s, 4 channels + 16 digital channels (model MSO2014). 200 MHz, 1 GS/s, 4 channels + 16 digital channels (Model MSO2024). 100 MHz, 1 GS/s, 2 channels (model DPO2012). 100 MHz, 1 GS/s, 4 channels (model DPO2014). 200 MHz, 1 GS/s, 4 channels (Model DPO2024). Record length: 1 million points to the channel. Vertical resolution: 8 bits. Sensitivity: 2 mV/div to 5 V/div with calibrated fine tuning. Continuous waveform capture rate: up to 5,000 waveforms/s. 29 automatic measurements, FFT analysis (FFT), mathematical signal processing, cursor measurements, mask measurement, context help, Russian interface. Interfaces: USB standard, Ethernet and VGA optional. Weight: 3.7 kg. Advanced A/D debugging capabilities

The main feature of the series Tektronix TPS2000B is that all input channels of these oscilloscopes electrically isolated from each other (galvanically separated). Two models in this series provide 100 MHz bandwidth. They are great for signal analysis of electrical networks, power supplies and other similar tasks.

Model	A photo	Short description
Isolated channel series with 100 MHz bandwidth oscilloscopes
Tektronix TPS2012B TPS2014B TPS2024B	Add to cart Product code: 1000412	Tektronix TPS2000B Series Oscilloscopes with Isolated Inputs and 100 MHz to 200 MHz Bandwidth 100 MHz, 1 GS/s, 2 channels (model TPS2012B). 100 MHz, 1 GS/s, 4 channels (model TPS2014B). 200 MHz, 2 GS/s, 4 channels (model TPS2024B). Record length: 2.5k points to the channel. Vertical resolution: 8 bits. Sensitivity: 2 mV/div to 5 V/div with calibrated fine tuning. All input channels are electrically isolated from each other. Analysis software module for working with power electronics (option TPS2PWR1). 11 automatic measurements, FFT analysis (FFT), mathematical signal processing, cursor measurements, mask measurement, context help, Russian interface. Possibility of supply up to 8 hours from built-in battery (option TPSBAT). Interfaces: RS-232, CompactFlash. Weight: 2.7 kg. (with two batteries 3.7 kg.). Portability, isolated inputs and self-powered

All series models Tektronix TBS1000B and Tektronix TBS2000B are inexpensive, classic oscilloscopes with a standard set of functions for this class. In these series, three oscilloscope models provide 100 MHz bandwidth. Models of the TBS2000B series have a large built-in memory and an oversized screen.

Model	A photo	Short description
Inexpensive series with 100 MHz bandwidth oscilloscopes
Tektronix TBS1032B TBS1052B TBS1072B TBS1102B TBS1152B TBS1202B	Add to cart Product code: 1000407	Tektronix TBS1000B and TBS1000B-EDU Digital Oscilloscopes 30 MHz, 0.5 GS/s, 2 channels (model TBS1032B). 50 MHz, 1 GS/s, 2 channels (models TBS1052B and TBS1052B-EDU). 70 MHz, 1 GS/s, 2 channels (models TBS1072B and TBS1072B-EDU). 100 MHz, 2 GS/s, 2 channels (models TBS1102B and TBS1102B-EDU). 150 MHz, 2 GS/s, 2 channels (TBS1152B and TBS1152B-EDU models). 200 MHz, 2 GS/s, 2 channels (models TBS1202B and TBS1202B-EDU). Record length: 2.5k points to the channel. Vertical resolution: 8 bits. Sensitivity: 2 mV/div to 5 V/div with calibrated fine tuning. Autotune. Trend analysis. Digital frequency meter (6 digits, 2 channels). 34 automatic measurements, FFT analysis (FFT), mathematical signal processing, cursor measurements, context help, Russian interface. Models with designation -EDU contain an embedded system for educational institutions. 17.8 cm screen (800 x 480 resolution). Weight: 2.0 kg. Interfaces: USB (standard), IEEE-488.2 (GPIB) (option). Budget, balanced solution for basic tasks and training
Tektronix TBS2072B TBS2074B TBS2102B TBS2104B TBS2202B TBS2204B	Add to cart Product code: 1000403	Tektronix TBS2000B Digital Storage Oscilloscopes 70 MHz, 2 GS/s, 2 channels (model TBS2072B). 70 MHz, 2 GS/s, 4 channels (model TBS2074B). 100 MHz, 2 GS/s, 2 channels (model TBS2102B). 100 MHz, 2 GS/s, 4 channels (model TBS2104B). 200 MHz, 2 GS/s, 2 channels (model TBS2202B). 200 MHz, 2 GS/s, 4 channels (model TBS2204B). Record length: 5M points per channel. Vertical resolution: 8 bits. Sensitivity: 2 mV/div to 10 V/div with calibrated fine tuning. 32 automatic measurements, FFT analysis (FFT), mathematical signal processing, cursor measurements, context help, Russian interface. Built-in oscilloscope manual. Support for active probes. 22.8 cm screen (800 x 480 resolution). Weight: 2.6 kg (2 channels) and 4.1 kg (4 channels). Interfaces: USB and Ethernet (standard), Wi-Fi (optional). The ultimate set of features for entry-level oscilloscopes

Of the 100 MHz USB oscilloscopes we offer, the most functional series is PicoScope 5000D companies Pico Technology (Great Britain). The hardware of these oscilloscopes is comparable to the best and most expensive series of desktop laboratory oscilloscopes, and the price is much lower. There are many models in the PicoScope 5000D series, four of which have a 100 MHz bandwidth. For these oscilloscopes, the ADC provides hardware resolution up to 16 bits. It is also worth paying attention to the very large amount of built-in memory and the high speed of capturing and processing waveforms (up to 130,000 pieces / s).

Model	A photo	Short description
The most capable USB series with 100 MHz bandwidth oscilloscopes
Pico Technology PicoScope 5000D	Add to cart Product code: 1000414	USB oscilloscopes with hardware resolution up to 16 bits Pico Technology PicoScope 5000D series from 60 MHz to 200 MHz 60 MHz, 1 GS/s, 2 channels (Model 5242D). 60 MHz, 1 GS/s, 4 channels (Model 5442D). 100 MHz, 1 GS/s, 2 channels (Model 5243D). 100 MHz, 1 GS/s, 4 channels (model 5443D). 200 MHz, 1 GS/s, 2 channels (Model 5244D). 200 MHz, 1 GS/s, 4 channels (Model 5444D). 60 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 5242D MSO). 60 MHz, 1 GS/s, 4 channels + 16 digital channels (Model 5442D MSO). 100 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 5243D MSO). 100 MHz, 1 GS/s, 4 channels + 16 digital channels (Model 5443D MSO). 200 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 5244D MSO). 200 MHz, 1 GS/s, 4 channels + 16 digital channels (Model 5444D MSO). If two or more channels are active, then the sampling rate is reduced (see table). Recording length (total, depends on the model): 64M to 512M. Hardware resolution: up to 16 bits. Sensitivity: 2 mV/div to 4 V/div. Continuous waveform capture rate (DPO mode): before 130,000 waveforms/s. All models include a built-in standard and arbitrary waveform generator (AWG). All models support decoding and analysis of 20 serial protocols: I2C, I2S, SPI, CAN, LIN, PS/2, RS-232/422/485/UART, USB 1.1, Ethernet, FlexRay and others. 15 automatic measurements, FFT analysis (FFT), mathematical signal processing. Interfaces: USB 3 (it is possible to connect to USB 2 with a special cable). Weight: 0.5 kg. Dimensions: 190 x 170 x 40 mm. Working temperature: from 0°С to +40°С. High hardware resolution, protocol analyzer, generator

A simpler and cheaper series is PicoScope 3000D. The main difference from the PicoScope 5000D series is the reduced ADC bit depth (8 bits in standard mode and up to 12 bits in high resolution mode). Four models of the PicoScope 3000D series support 100 MHz bandwidth.

Model	A photo	Short description
A simpler USB series that has 100 MHz bandwidth oscilloscopes
Pico Technology PicoScope 3000D	Add to cart Product code: 1000413	USB oscilloscopes for digital, analog and mixed signals Pico Technology PicoScope 3000D series from 50 MHz to 200 MHz 50 MHz, 1 GS/s, 2 channels (Model 3203D). 50 MHz, 1 GS/s, 4 channels (Model 3403D). 70 MHz, 1 GS/s, 2 channels (Model 3204D). 70 MHz, 1 GS/s, 4 channels (Model 3404D). 100 MHz, 1 GS/s, 2 channels (model 3205D). 100 MHz, 1 GS/s, 4 channels (model 3405D). 200 MHz, 1 GS/s, 2 channels (Model 3206D). 200 MHz, 1 GS/s, 4 channels (Model 3406D). 50 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 3203D MSO). 50 MHz, 1 GS/s, 4 channels + 16 digital channels (Model 3403D MSO). 70 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 3204D MSO). 70 MHz, 1 GS/s, 4 channels + 16 digital channels (Model 3404D MSO). 100 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 3205D MSO). 100 MHz, 1 GS/s, 4 channels + 16 digital channels (Model 3405D MSO). 200 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 3206D MSO). 200 MHz, 1 GS/s, 4 channels + 16 digital channels (Model 3406D MSO). If two or more channels are active, then the sampling rate is reduced (see table). Recording length (total, depends on the model): 64M to 512M. Vertical resolution: 8 bits (up to 12 bits). Sensitivity: 4 mV/div to 4 V/div. Continuous waveform capture rate (DPO mode): before 100,000 waveforms/s. All models include a built-in standard and arbitrary waveform generator (AWG). All models support decoding and analysis of 18 serial protocols: I2C, I2S, SPI, CAN, LIN, 1-Wire, RS-232/UART, USB 1.1, Ethernet, FlexRay and others. 15 automatic measurements, FFT analysis (FFT), mathematical signal processing. Powerful PicoScope 6 software (in Russian) included. Interfaces: USB 3 (it is possible to connect to USB 2 with a special cable). Weight: 0.5 kg. Dimensions: 190 x 170 x 40 mm. Working temperature: from 0°С to +40°С. Large memory, digital phosphor, protocol analyzer, generator

Of all the digital oscilloscopes we offer up to 100 MHz (2 channels and 4 channels), the simplest models are contained in the series PicoScope 2000A and PicoScope 2000B. These are low-cost miniature USB oscilloscopes with solid features: 1 GS/s sample rate, up to 128M points of built-in memory, and continuous waveform acquisition speed (DPO mode) up to 80,000 waveforms/s. Also, the MSO modification includes logic analyzer for 16 digital channels.

Model	A photo	Short description
The simplest USB series that has 100 MHz bandwidth oscilloscopes
Pico Technology PicoScope 2000A 2000B	Add to cart Product code: 1000408	Pico Technology Compact USB Oscilloscopes PicoScope 2000A and 2000B Series from 10 MHz to 100 MHz 10 MHz, 100 MSa/s, 2 channels (Model 2204A). 25 MHz, 200 MSa/s, 2 channels (Model 2205A). 25 MHz, 500 MSa/s, 4 channels (Model 2405A). 50 MHz, 500 MSa/s, 2 channels (Model 2206B). 50 MHz, 1 GS/s, 4 channels (Model 2406B). 70 MHz, 1 GS/s, 2 channels (Model 2207B). 70 MHz, 1 GS/s, 4 channels (Model 2407B). 100 MHz, 1 GS/s, 2 channels (model 2208B). 100 MHz, 1 GS/s, 4 channels (model 2408B). 25 MHz, 500 MSa/s, 2 channels + 16 digital channels (Model 2205A MSO). 50 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 2206B MSO). 70 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 2207B MSO). 100 MHz, 1 GS/s, 2 channels + 16 digital channels (Model 2208B MSO). If two or more channels are active, then the sampling rate is reduced (see table). Recording length (total, depends on the model): from 8k points to 128m points. Vertical resolution: 8 bits (up to 12 bits). Sensitivity: 4 mV/div to 4 V/div. Continuous waveform capture rate (DPO mode): before 80,000 waveforms/s. All models include a built-in standard and arbitrary waveform generator (AWG). All models support decoding and analysis of 20 serial protocols: I2C, I2S, SPI, CAN, LIN, 1-Wire, SENT, RS-232/UART, USB 1.1, Ethernet, FlexRay and others. 18 automatic measurements, FFT analysis (FFT), mathematical signal processing. PicoScope 6 software included. Control via USB 2.0 from a computer with Windows XP, 7, 8 or 10 (32 and 64 bits). Weight: 0.2 kg. Dimensions: 130 x 104 x 19 mm. Working temperature: from 0°С to +50°С. A unique set of features for economy class oscilloscopes

Digital oscilloscopes 70 MHz, 60 MHz and 50 MHz

Many series containing 100 MHz oscilloscopes also have cheaper models with reduced bandwidth of 70 MHz, 60 MHz, or 50 MHz. At the same time, the functionality is similar to the 100 MHz models, and the price is significantly lower.

Of the digital oscilloscopes we offer, models with a bandwidth of 70 MHz, 60 MHz and 50 MHz are in the following series: Tektronix TBS1000B, Tektronix TBS2000B, PicoScope 5000D, PicoScope 3000D, PicoScope 2000A and PicoScope 2000B. A brief description of the differences between these series, see above on this page. To get acquainted with all the possibilities of oscilloscopes, go to the individual pages of each series.

Digital oscilloscopes 30 MHz and 25 MHz

Oscilloscopes with a bandwidth of 30 MHz and 25 MHz are most often bought by educational institutions and radio amateurs. Of the digital oscilloscopes we offer, models with a bandwidth of 30 MHz and 25 MHz are in the following series: Tektronix TBS1000B, PicoScope 2000A and PicoScope 2000B. A brief description of the differences between these series, see above on this page.

Digital oscilloscopes 20 MHz

We offer two series of 20 MHz bandwidth oscilloscopes: PicoScope 4444 and PicoScope 4000A Pico Technology (Great Britain). There are four models of USB oscilloscopes in these series with very interesting characteristics.

In the first series, only one oscilloscope with a bandwidth of 20 MHz is the PicoScope 4444. It contains four channels with fully differential inputs. This provides unique opportunities for signal analysis of power supplies and various devices containing elements with different ground levels. Also note that this oscilloscope has a 12- to 14-bit ADC, 256M-point internal memory, and a set of inexpensive accessories that includes a differential galvanically isolated probe up to 1,000 Volts and current clamps and loops from 30 to 3,000 Amperes.

The second series consists of three models with a bandwidth of 20 MHz - this is the PicoScope 4824A (8 analog channels), PicoScope 4424A (4 analog channels), and PicoScope 4224A (2 analog channels). The ADC of these oscilloscopes has a hardware capacity of 12 bits (up to 16 bits in the averaging mode), and the built-in memory can accommodate 256 million points. Also standard on each model is a standard and arbitrary signal generator (14-bit AWG).

Model	A photo	Short description
Special Series USB Oscilloscopes with 20 MHz Bandwidth
Pico Technology PicoScope 4444	Add to cart Product code: 1000409	USB oscilloscope with differential inputs Pico Technology PicoScope 4444 with a bandwidth of 20 MHz 20 MHz, 400 MSa/s, 4 channels (model 4444). If two or more channels are active, then the sampling rate is reduced (see table). Recording length (total for all channels): 256 million points. Vertical Resolution: 12bit or 14bit. Sensitivity: 2 mV/div to 10 V/div. Automatic detection of probe types. Probe power supply from the oscilloscope. Probes: differential up to 50 V (model 441), differential galvanically isolated up to 1000 V (model 442), current clamps and loops (from 30 A to 3000 A). Decoding and analysis of 20 protocols: I2C, I2S, SPI, CAN, LIN, PS/2, UART and others. 18 automatic measurements, FFT analysis (FFT). Interfaces: USB 3 or USB 2. Weight: 0.5 kg. Dimensions: 190 x 170 x 40 mm. Working temperature: from 0°С to +45°С. Fully differential inputs, high accuracy and low noise
Pico Technology PicoScope 4000A	Add to cart Product code: 1000410	Pico Technology Pico Technology 4000A High-Resolution Multichannel USB Oscilloscopes with 20 MHz bandwidth 20 MHz, 80 MSa/s, 2 channels (model 4224A). 20 MHz, 80 MSa/s, 4 channels (model 4424A). 20 MHz, 80 MSa/s, 8 channels (model 4824A). If five or more channels are active, the sample rate is downsampled to 40 MS/s. Recording length (total for all channels): 256 million points. Vertical resolution: 12 bits (up to 16 bits). Sensitivity: 2 mV/div to 10 V/div. Built-in standard and arbitrary waveform generator (14 bit AWG). Decoding and analysis of 18 protocols: I2C, I2S, SPI, CAN, LIN, RS-232/UART, etc. 19 automatic measurements, FFT analysis (FFT). Interfaces: USB 3 or USB 2. Weight: 0.55 kg. Dimensions: 190 x 170 x 40 mm. Working temperature: from 0°С to +45°С. Development of multichannel systems, process monitoring

Digital oscilloscopes 10 MHz

The 10 MHz oscilloscope is the most attractive and affordable choice for beginner hams. We offer one model of such an oscilloscope - this is a miniature USB oscilloscope PicoScope 2204A. It belongs to the series PicoScope 2000A, a brief description of which can be found above on this page. Despite its small size and low bandwidth, the 2204A can process up to 2,000 waveforms per second and includes a standard waveform generator as standard.

Comparison table of oscilloscopes from 10 MHz to 100 MHz

The table below shows the oscilloscopes we offer from 10 MHz to 100 MHz. At the same time, for each model, the main technical characteristics (bandwidth, number of channels, sampling rate, and others) are indicated.

All oscilloscope models sorted in the table as they increase bandwidth. If the bandwidth is the same, then the cheaper devices are placed first.

Notes:

¹ Number of channels - the number of analog channels is indicated. If the oscilloscope is also equipped with digital channels as standard, then their number is indicated after the "+" sign. If digital channels are available as an option, this is marked as (opt.).

² Record length - the standard recording depth per channel is indicated, in many series the memory size can be increased using additional options.

³ Oscillograms per second - indicates the speed of continuous capture and analysis of waveforms, which can actually be provided by a specific model. Several tens of waveforms per second are enough to view stationary signals. To detect infrequent interference or fast signal changes, choose a model capable of delivering at least 5,000 waveforms per second. Read the article for details: description of DPO technology.

⁴ Spectrum analyzer - four types of spectrum analyzers are used in oscilloscopes: software-based FFT (FFT), software-hardware based on SpectrumView, software-based SignalVu and a full-fledged hardware radio spectrum analyzer. The software analyzer based on the FFT (FFT) has two main drawbacks: it works only with large amplitude signals (10 mV or more) and when using it, as a rule, it is not possible to simultaneously see the signal itself and its spectrum. The SpectrumView-based firmware analyzer has a separate digital spectrum processor in each oscilloscope channel and provides ease of use and capabilities far beyond the FFT. The SignalVu-based software analyzer has very broad RF analysis capabilities, including vector demodulation, but like the FFT and SpectrumView only works with large amplitude signals. A fully hardware analyzer allows you to fully measure the spectral characteristics of even weak radio signals with an amplitude of less than 1 μV (less than -107 dBm).

Choosing the Best Digital Oscilloscope from 10 MHz to 100 MHz

To simplify the selection process digital oscilloscope, You can benefit from our experience and recommendations. We have over 20 years of practical supply experience and can immediately answer many questions about models, options, delivery times, prices and discounts. This will save your time and money. For this it's simple call us or write to us at Email and we will be happy to answer your questions.