Digital Oscilloscopes from 1 GHz to 80 GHz

This section presents professional digital oscilloscopes with a bandwidth of 1 GHz and above, up to 80 GHz. To simplify the choice, a brief description of the features of each series in which there are such models is given, this will help you understand how some series differ from others, and which oscilloscope model is better to buy.

All oscilloscopes are divided into groups: 1 GHz - 2.5 GHz, 4 GHz - 8 GHz and over 10 GHz. At the end of the page there is a separate group, which contains stroboscope oscilloscopes with a band up to 80 GHz.

If you are choosing your first oscilloscope and are not very familiar with their types and characteristics, we recommend reading this article: Choosing a digital oscilloscope - a detailed guide.

Section filters "Buy an oscilloscope":
Bandwidth: 100 MHz or less, 200 MHz, 300 MHz, 500 MHz, 1 GHz or more.
Subsections: USB oscilloscopes, best models, all models, comparison, Video reviews, basic theory.
Articles and reviews: how to choose an oscilloscope, digital phosphor technology, power supply development.

1 GHz, 1.5 GHz, 2 GHz, and 2.5 GHz professional oscilloscopes

This table lists the oscilloscopes we offer in bandwidths from 1 GHz to 2.5 GHz. For each model, the main technical characteristics are indicated. All oscilloscope models with the same bandwidth arranged in the table as the cost increases their basic equipment.

The following is a brief description of the main series of oscilloscopes presented in this table.

Notes:

¹ Number of channels - the number of analog channels is indicated. If the oscilloscope is also equipped with digital channels as standard, then their number is indicated after the "+" sign. If digital channels are available as an option, this is marked as (opt.).

² Record length - the standard recording depth per channel is indicated, in many series the memory size can be increased using additional options.

³ Oscillograms per second - indicates the speed of continuous capture and analysis of waveforms, which can actually be provided by a specific model. Several tens of waveforms per second are enough to view stationary signals. To detect infrequent interference or fast signal changes, choose a model capable of delivering at least 5,000 waveforms per second. Read the article for details: description of DPO technology.

⁴ Spectrum analyzer - four types of spectrum analyzers are used in oscilloscopes: software-based FFT (FFT), software-hardware based on SpectrumView, software-based SignalVu and a full-fledged hardware radio spectrum analyzer. The software analyzer based on the FFT (FFT) has two main drawbacks: it works only with large amplitude signals (10 mV or more) and when using it, as a rule, it is not possible to simultaneously see the signal itself and its spectrum. The SpectrumView-based firmware analyzer has a separate digital spectrum processor in each oscilloscope channel and provides ease of use and capabilities far beyond the FFT. The SignalVu-based software analyzer has very broad RF analysis capabilities, including vector demodulation, but like the FFT and SpectrumView only works with large amplitude signals. A fully hardware analyzer allows you to fully measure the spectral characteristics of even weak radio signals with an amplitude of less than 1 μV (less than -107 dBm).

Of all the series that have oscilloscopes with bandwidths from 1 GHz to 2.5 GHz, the best is the series Tektronix MSO6, which provides a sampling rate of 25 GS/s per analog channel. All other series can provide a maximum of 6.25 GS/s per channel. These are the series: MSO5, MSO4, MDO4000C and MDO3. Consider the main features of each of these series.

In series Tektronix MSO5 a total of 12 oscilloscopes, three of which are with a bandwidth of 1 GHz and three more with a bandwidth of 2 GHz. Depending on the model, these oscilloscopes can contain from 4 to 8 analog channels, each with support for FlexChannel (up to 64 digital channels). Digitization of signals on all channels is carried out using accurate 12-bit ADCs at a rate of 3.125 GS/s. By reducing the ADC capacity to 8 bits, a twofold increase in the digitization rate to 6.25 GS/s is provided.

Model	A photo	Short description
Functional series that has 1 GHz and 2 GHz bandwidth oscilloscopes
Tektronix MSO54 MSO56 MSO58	Add to cart Product code: 1000416	Tektronix MSO5 Series Digital, Analog, and Mixed Signal Oscilloscopes from 350 MHz to 2 GHz 350 MHz, 6.25 GS/s, 4 FlexChannels (Model MSO54-BW-350). 350 MHz, 6.25 GS/s, 6 FlexChannels (Model MSO56-BW-350). 350 MHz, 6.25 GS/s, 8 FlexChannels (Model MSO58-BW-350). 500 MHz, 6.25 GS/s, 4 FlexChannels (Model MSO54-BW-500). 500 MHz, 6.25 GS/s, 6 FlexChannels (Model MSO56-BW-500). 500 MHz, 6.25 GS/s, 8 FlexChannels (Model MSO58-BW-500). 1 GHz, 6.25 GS/s, 4 channels FlexChannel (model MSO54-BW-1000). 1 GHz, 6.25 GS/s, 6 channels FlexChannel (model MSO56-BW-1000). 1 GHz, 6.25 GS/s, 8 channels FlexChannel (model MSO58-BW-1000). 2 GHz, 6.25 GS/s, 4 channels FlexChannel (Model MSO54-BW-2000). 2 GHz, 6.25 GS/s, 6 channels FlexChannel (model MSO56-BW-2000). 2 GHz, 6.25 GS/s, 8 channels FlexChannel (model MSO58-BW-2000). Any channel FlexChannel works as one analog or as 8 digital channels. Standard recording length: 62.5M points per channel. Option: 125M points per channel. Vertical resolution: 8 or 12 bits (up to 16 bits in high resolution mode). Sensitivity: 0.5 mV/div to 10 V/div in 1-2-5 steps. Continuous Waveform Capture Speed: More 500,000 waveforms/s. 34 automatic measurements, Histograms, Jitter, FFT (FFT), SpectrumView (option). Built-in digital voltmeter and frequency counter (free of charge when registering the device). Additional options: standard and arbitrary signal generator, logic analyzer up to 64 digital channels, serial bus protocol analyzer: I2C, SPI, RS-232/422/485/UART, CAN, LIN, FlexRay, USB 2.0, Ethernet, I2S, LJ, RJ, TDM and others. 39.6 cm touchscreen (1920 x 1080 resolution). Interfaces: USB, Ethernet, DVI-D. Weight: 11.4 kg. Dimensions: 454 x 309 x 204 mm. Working temperature: from 0°С to +50°С. Efficient design of multi-channel analog and digital systems

A simpler series, in which there are models with a band of 1 GHz and 1.5 GHz, is Tektronix MSO4. Same as older series MSO5, the MSO4 series digital oscilloscopes feature a large Full HD touchscreen, but with a smaller diagonal (33cm) and a similar user interface. They contain 4 or 6 analog channels with technology FlexChannel (up to 48 digital channels). Signals are digitized using accurate 12-bit ADCs, and rare signal anomalies are searched using DPO technologies (more than 500,000 waveforms per second).

Model	A photo	Short description
A simpler series that has both 1 GHz and 1.5 GHz bandwidth oscilloscopes
Tektronix MSO44 MSO46	Add to cart Product code: 1000415	Tektronix MSO4 Digital, Analog and Mixed Signal Oscilloscopes 200 MHz to 1.5 GHz 200 MHz, 6.25 GS/s, 4 FlexChannels (Model MSO44-BW-200). 200 MHz, 6.25 GS/s, 6 FlexChannels (Model MSO46-BW-200). 350 MHz, 6.25 GS/s, 4 FlexChannels (Model MSO44-BW-350). 350 MHz, 6.25 GS/s, 6 FlexChannels (Model MSO46-BW-350). 500 MHz, 6.25 GS/s, 4 FlexChannels (Model MSO44-BW-500). 500 MHz, 6.25 GS/s, 6 FlexChannels (Model MSO46-BW-500). 1 GHz, 6.25 GS/s, 4 channels FlexChannel (model MSO44-BW-1000). 1 GHz, 6.25 GS/s, 6 channels FlexChannel (model MSO46-BW-1000). 1.5 GHz, 6.25 GS/s, 4 channels FlexChannel (model MSO44-BW-1500). 1.5 GHz, 6.25 GS/s, 6 channels FlexChannel (model MSO46-BW-1500). Any channel FlexChannel works as one analog or as 8 digital channels. Standard record length: 31.25M points per channel. Option: 62.5M points per channel. Vertical resolution: 8 or 12 bits (up to 16 bits in high resolution mode). Sensitivity: 0.5 mV/div to 10 V/div in 1-2-5 steps. Continuous Waveform Capture Speed: More 500,000 waveforms/s. 36 automatic measurements, histograms, trends, FFT (FFT), SpectrumView (option). Built-in digital voltmeter and frequency counter (free of charge when registering the device). Additional options: standard and arbitrary signal generator, logic analyzer up to 48 digital channels, serial bus protocol analyzer: I2C, MIPI I3C, SPI, RS-232/422/485/UART, CAN, LIN, USB 2.0, Ethernet, I2S, LJ, RJ , TDM and others. 33.8 cm touchscreen (1920 x 1080 resolution). Interfaces: USB, Ethernet, HDMI. Weight: 7.6 kg. Dimensions: 405 x 249 x 155 mm. Working temperature: from 0°С to +50°С. Essential oscilloscope for multi-channel analog and digital systems

Another series that has one 1 GHz bandwidth oscilloscope is Tektronix MDO4000C. The devices of this series are unique in that they contain built-in spectrum analyzer up to 6 GHz. At the same time, the signals from the analog and digital channels of these oscilloscopes and the signal from its RF input are precisely time-coupled, which makes it possible to correlate events in the frequency domain with their causes in the time domain and vice versa.

In addition to advanced RF analysis capabilities, the MDO4000C Series digital oscilloscopes measure up to 340,000 waveforms per second, include a built-in standard and arbitrary waveform generator, a 16-channel digital logic analyzer, and a serial bus protocol analyzer.

Model	A photo	Short description
A series that has a 1 GHz bandwidth oscilloscope with a built-in spectrum analyzer
Tektronix MDO4024C MDO4034C MDO4054C MDO4104C		Oscilloscopes with built-in spectrum analyzer, oscillator, logic analyzer, protocol analyzer, voltmeter and frequency counter Tektronix MDO4000C series from 200 MHz to 1 GHz 200 MHz, 2.5 GS/s, 4 channels (Model MDO4024C). 350 MHz, 2.5 GS/s, 4 channels (Model MDO4034C). 500 MHz, 2.5 GS/s, 4 channels (Model MDO4054C). 1 GHz, 5 GS/s, 4 channels (model MDO4104C). Record length: 20 million points to the channel. Vertical resolution: 8 bits (11 bits in high resolution mode). Sensitivity: 1 mV/div to 10 V/div with calibrated fine tuning. Continuous waveform capture rate: up to 340,000 waveforms/s. Automatic measurements: 30 (time domain), 3 (frequency domain). Built-in digital voltmeter and frequency counter (free of charge when registering the device). Passive voltage probes with a capacitance of 3.9 pF (standard). Additional options: spectrum analyzer (up to 3 GHz or 6 GHz) performing spectrum capture time related with analog and digital oscilloscope inputs, generator of standard and arbitrary signals, logic analyzer for 16 digital channels, analyzer of serial bus protocols: I2C, SPI, RS-232/422/485/UART, Ethernet, USB 2.0, CAN, LIN, FlexRay, MIL-STD-1553, audio tires and others. Screen 26.4 cm (resolution 1024 x 768). Interfaces: USB, Ethernet, XGA monitor. Weight: 5.5 kg. Dimensions: 229 x 439 x 147 mm. Working temperature: from 0°С to +50°С. A unique solution for debugging systems in the frequency and time domain

The simplest series in this category is Tektronix MDO3, it includes two oscilloscopes with a bandwidth of 1 GHz for 2 channels and 4 channels. The series is equipped with a 29 cm Full HD touch screen and a built-in spectrum analyzer up to 3 GHz (simpler than in the series MDO4000C).

It is worth noting that the MDO3 series oscilloscopes measure up to 280,000 waveforms per second, which makes it easier to find rare signal anomalies. And with the help of additional options, the following can be activated: a built-in generator of standard and arbitrary signals, a logic analyzer for 16 digital channels and an analyzer of protocols for serial digital buses (I2C, SPI, CAN, UART, USB 2.0, etc.).

Model	A photo	Short description
The simplest series that has 1 GHz bandwidth oscilloscopes
Tektronix MDO32 MDO34	Add to cart Product code: 1000404	Oscilloscopes with built-in spectrum analyzer, oscillator, logic analyzer, protocol analyzer, voltmeter and frequency counter Tektronix MDO3 series from 100 MHz to 1 GHz 100 MHz, 2.5 GS/s, 2 channels (Model MDO32-BW-100). 100 MHz, 2.5 GS/s, 4 channels (Model MDO34-BW-100). 200 MHz, 2.5 GS/s, 2 channels (Model MDO32-BW-200). 200 MHz, 2.5 GS/s, 4 channels (Model MDO34-BW-200). 350 MHz, 2.5 GS/s, 2 channels (Model MDO32-BW-350). 350 MHz, 2.5 GS/s, 4 channels (Model MDO34-BW-350). 500 MHz, 2.5 GS/s, 2 channels (Model MDO32-BW-500). 500 MHz, 2.5 GS/s, 4 channels (Model MDO34-BW-500). 1 GHz, 5 GS/s, 2 channels (Model MDO32-BW-1000). 1 GHz, 5 GS/s, 4 channels (model MDO34-BW-1000). Record length: 10 million points to the channel. Vertical resolution: 8 bits (11 bits in high resolution mode). Sensitivity: 1 mV/div to 10 V/div with calibrated fine tuning. Continuous waveform capture rate: up to 280,000 waveforms/s. Built-in Spectrum Analyzer: 9 kHz - 1 GHz (option 3-SA1), 9 kHz - 3 GHz (option 3-SA3). Built-in digital voltmeter and frequency counter (included as standard). Additional options: built-in generator of standard and arbitrary signals, built-in logic analyzer for 16 digital channels, protocol analyzer: I2C, SPI, RS-232/422/485/UART, USB 2.0, CAN, LIN, FlexRay, MILSTD-1553, audio buses and others. 29.5 cm touchscreen (1920 x 1080 resolution). Interfaces: USB, Ethernet, HDMI. Weight: 7.9 kg. Dimensions: 370 x 252 x 149 mm. Working temperature: from 0°С to +55°С. An indispensable tool in the design, debugging and repair of modern complex electronic systems

4 GHz, 6 GHz, and 8 GHz professional oscilloscopes

This table shows the range of oscilloscopes we offer from 4 GHz to 8 GHz. For each model, the main technical characteristics are indicated. All oscilloscope models with the same bandwidth arranged in the table as the cost increases their basic equipment.

From 2 GHz to 8 GHz bandwidth oscilloscopes, the most technically advanced is the new series Tektronix MSO6. In addition to a fast digitizing rate of 25 GS/s, the MSO6 oscilloscopes have very low noise floor. If necessary, the bandwidth of any model of this series expandable up to 8 GHz with a simple software key activation.

Thanks to technology FlexChannel each analog channel of these oscilloscopes can operate as 8 digital channels. And the large touch screen and innovative user interface are completely unified with the series. Tektronix MSO5.

Model	A photo	Short description
The most feature-packed series with oscilloscopes from 2 GHz to 8 GHz
Tektronix MSO64	Add to cart Product code: 1000406	Tektronix MSO6 Digital, Analog and Mixed Signal Oscilloscopes 1 GHz to 8 GHz 1 GHz, 25 GS/s, 4 FlexChannels (Model MSO64-BW-1000). 2.5 GHz, 25 GS/s, 4 FlexChannels (Model MSO64-BW-2500). 4 GHz, 25 GS/s, 4 channels FlexChannel (Model MSO64-BW-4000). 6 GHz, 25 GS/s, 4 channels FlexChannel (Model MSO64-BW-6000). 8 GHz, 25 GS/s, 4 channels FlexChannel (model MSO64-BW-8000). Any channel FlexChannel works as one analog or as 8 digital channels. Standard recording length: 62.5M points per channel. Option: 125 and 250M points per channel. Vertical resolution: 8 or 12 bits (up to 16 bits in high resolution mode). Sensitivity: 0.5 mV/div to 10 V/div in 1-2-5 steps. Continuous Waveform Capture Speed: More 500,000 waveforms/s. 36 automatic measurements, Histograms, Jitter, FFT (FFT), SpectrumView (option). Built-in digital voltmeter and frequency counter (free of charge when registering the device). Additional options: standard and arbitrary signal generator, logic analyzer up to 32 digital channels, serial bus protocol analyzer: I2C, SPI, RS-232/422/485/UART, CAN, LIN, FlexRay, USB 2.0, Ethernet, I2S, LJ, RJ, TDM and others. 39.6 cm touchscreen (1920 x 1080 resolution). Interfaces: USB, Ethernet, DVI-D. Weight: 12.9 kg. Dimensions: 454 x 309 x 205 mm. Working temperature: from 0°С to +50°С. Efficient and accurate analysis of high-speed analog and digital systems

Professional oscilloscopes over 10 GHz

This table shows the oscilloscopes we offer with a bandwidth greater than 10 GHz. For each model, the main technical characteristics are indicated. All oscilloscope models with the same bandwidth arranged in the table as the cost increases their basic equipment.

We offer several series of oscilloscopes that include models with bandwidths greater than 10 GHz. It's like classic real-time oscilloscopes (series up to 33 GHz Tektronix DPO/MSO70000 and series up to 70 GHz Tektronix DPO70000SX) and stroboscope oscilloscopes up to 80 GHz, detailed information about which is located in a separate section further on this page.

Below are the specifications of our main line of broadband oscilloscopes. Tektronix DPO/MSO70000. These oscilloscopes contain 4 analog channels with a maximum sampling rate of 100 GS/s. MSO models contain 16 digital channels in addition to analog channels. All models of this series use high-speed ADCs with a capacity of 8 bits.

Model	A photo	Short description
A series that has oscilloscopes with a bandwidth greater than 10 GHz
Tektronix DPO70000C DPO70000DX MSO70000C MSO70000DX	Add to cart Product code: 1000417	Tektronix DPO 70000C (DX) and MSO 70000C (DX) Ultra Fast Digital, Analog and Mixed Signal Oscilloscopes 4 GHz, 25 GS/s, 4 channels (Model DPO70404C). 6 GHz, 25 GS/s, 4 channels (Model DPO70604C). 8 GHz, 25 GS/s, 4 channels (Model DPO70804C). 12.5 GHz, 100 GS/s, 4 channels (model DPO71254C). 16 GHz, 100 GS/s, 4 channels (model DPO71604C). 20 GHz, 100 GS/s, 4 channels (model DPO72004C). 23 GHz, 100 GS/s, 4 channels (model DPO72304DX). 25 GHz, 100 GS/s, 4 channels (model DPO72504DX). 33 GHz, 100 GS/s, 4 channels (model DPO73304DX). 4 GHz, 25 GS/s, 4 channels + 16 digital channels (Model MSO70404C). 6 GHz, 25 GS/s, 4 channels + 16 digital channels (Model MSO70604C). 8 GHz, 25 GS/s, 4 channels + 16 digital channels (Model MSO70804C). 12.5 GHz, 100 GS/s, 4 channels + 16 digital channels (model MSO71254C). 16 GHz, 100 GS/s, 4 channels + 16 digital channels (model MSO71604C). 20 GHz, 100 GS/s, 4 channels + 16 digital channels (model MSO72004C). 23 GHz, 100 GS/s, 4 channels + 16 digital channels (model MSO72304DX). 25 GHz, 100 GS/s, 4 channels + 16 digital channels (model MSO72504DX). 33 GHz, 100 GS/s, 4 channels + 16 digital channels (model MSO73304DX). Record length: 31 Mpts per channel (for DPO series) and 62 Mpts per channel (for MSO). Optional up to 500M points per channel. Digital channels: 12.5 GS/s per channel. Vertical resolution: 8 bits (11 bits in average mode). Sensitivity: 6.25 mV/div to 600 mV/div. Continuous waveform capture rate: up to 300,000 waveforms/s. Measurements: PCI Express, 8b10b Encoded Serial Data, I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, USB 2.0, HSIC, MIL-STD-1553B, MIPI D-PHY and M-PHY . Areas of use: signal integrity, jitter, timing analysis, serial bus compliance testing, memory bus debugging and analysis, transient analysis, complex electronic system testing, transient broadband and RF spectrum analysis. Interfaces: USB, Ethernet, IEEE-488.2 (GPIB), eSATA, DVI-D, VGA, etc. Weight: 24 kg. Ultra-fast oscilloscopes for complex signals and systems

Sampling oscilloscopes from 5 GHz to 80 GHz

Sampling oscilloscopes are built on a different architecture from conventional real-time oscilloscopes. Sampling oscilloscopes use a wideband input path coupled with relatively slow but accurate high resolution ADCs and a dedicated precision trigger system. This design makes sampling oscilloscopes ideal for digitization of periodic signals and related applications, such as certification of equipment for electrical and optical telecommunications systems.

We offer several series of gigahertz sampling oscilloscopes from companies Pico Technology (UK) and Tektronix (USA). Brief information about them is given below. For detailed information, see the respective pages of each series and the technical documentation in PDF format.

Model	A photo	Short description
Stroboscopic oscilloscopes Pico Technology
Pico Technology PicoScope 9400	Add to cart Product code: 1000419	Pico Technology PicoScope 9400 Series USB Arbitrary Time Equivalent Oscilloscopes from 5 GHz to 16 GHz 5 GHz, 1000 GS/s, 4 channels (model 9404-05). 16 GHz, 5000 GS/s, 4 channels (model 9404-16). Real-time capture rate: up to 500 MS/s. Vertical resolution: 12 bits. Accurate measurement of pulsed signals up to 22 ps and digital streams up to 8 Gbps. Voltage: up to ±800 mV (50 ohms). Record length (total for all channels): 250k points. 53 automated measurements pulse signals and signals of the NRZ, RZ type. Powerful PicoSample 4 software included. Control via USB 2.0 or Ethernet from a computer with Windows 7, 8 or 10 (32 and 64 bits). Weight: 1.4 kg. Dimensions: 245 x 232 x 60 mm. Working temperature: from +5°С to +40°С. Convenient and cost-effective solution for pulse and digital signals
Pico Technology PicoScope 9300	Add to cart Product code: 1000420	Pico Technology PicoScope 9300 Series USB Serial Time -Equivalent Sampling Oscilloscopes from 15 GHz to 25 GHz 15 GHz, 15,000 GS/s, 2 channels (model 9301-15). 20 GHz, 15,000 GS/s, 4 channels (model 9341-20). 25 GHz, 15,000 GS/s, 2 channels (model 9301-25). 25 GHz, 15,000 GS/s, 4 channels (model 9341-25). 15 GHz, 15,000 GS/s, 2 channels + TDR/TDT (model 9311-15). 20 GHz, 15,000 GS/s, 2 channels + TDR/TDT (model 9311-20). 15 GHz, 15,000 GS/s, 2 channels + Clock Recovery (model 9302-15). 20 GHz, 15,000 GS/s, 2 channels + Clock Recovery + O/E (model 9321-20). 25 GHz, 15,000 GS/s, 2 channels + Clock Recovery (model 9302-25). Real-time capture rate: up to 1 MS/s. Vertical resolution: 16 bits. Accurately measure pulsed signals up to 14 ps and digital streams up to 16 Gbps. Voltage: up to ±1 V (50 ohms). Record length: 32k points per channel. TDR - measurement of the distance to mismatch in the path (resolution up to 4 mm.). Clock Recovery - clock recovery up to 11.3 Gbps. O/E - built-in optical-electronic converter (from 750 to 1650 nm) up to 9.5 GHz. 100+ automated measurements pulse signals and signals of the NRZ, RZ type. Powerful PicoSample 3 software included. Control via USB 2.0 or Ethernet from a computer running Windows XP, 7, 8 or 10 (32 and 64 bits). Weight: 1.3 kg. Dimensions: 170 x 285 x 40 mm. Working temperature: from +5°С to +35°С. Affordable, high-performance broadband oscilloscopes
Stroboscopic oscilloscopes Tektronix
Tektronix DSA8300	Add to cart Product code: 1000418	Tektronix DSA8300 Series High-Speed Serial Sampling Oscilloscope 70 GHz (electrical), 80 GHz (optical), up to 8 channels. High capture rate: up to 300 kS/s. Vertical resolution: 16 bits. Sweep generator jitter value: 200 fs. Support for the full range of standard optical data rates: from 155 Mb/s to 100 Gb/s. 120 automated measurements pulse signals and signals of the NRZ, RZ type. Automated mask testing against 80 industry standards. Ability to import new masks, as well as create your own. Areas of use: design and validation of components and systems for the telecommunications industry, production and testing to ITU/ANSI/IEEE/SONET/SDH standards, accurate, true differential time domain reflected (TDR) measurements, advanced jitter, noise and BER analysis, measurement impedance and serial bus signal analysis, including S-parameter measurements, channel and eye diagram modeling, and SPICE modeling. Interfaces: USB, IEEE-488.2 (GPIB), Ethernet, RS-232, DVI-I, VGA, etc. Weight: 21 kg. Testing all types of communication signals and serial buses

Choosing the Best Digital Oscilloscope with 1 GHz or More Bandwidth

To simplify the selection process digital oscilloscope, You can benefit from our experience and recommendations. We have over 20 years of practical supply experience and can immediately answer many questions about models, options, delivery times, prices and discounts. This will save your time and money. For this it's simple call us or write to us at Email and we will be happy to answer your questions.