Tektronix THS3000 Isolated Input Handheld Oscilloscope Series

 

SHORT DESCRIPTION

Portable oscilloscopes from an American company Tektronix series THS3000 were designed specifically to perform differential measurements and measurements with isolated (floating) inputs at remote and autonomous objects such as: electrical substations, rail and air transport, industrial installations, etc. To effectively solve such problems, the THS3000 series oscilloscopes are made in a small portable case , have a low weight and an extended temperature range, and are also equipped with a capacious battery. You can download a full description of all the characteristics below on this page in the section Documentation.

Areas of use:
- analog and digital systems
- power supplies
- high current electronics
- development and maintenance of automotive and aviation electronics
- development and maintenance of industrial electronics
- testing and maintenance of electronics in the field

Tektronix THS3000 Series Key Features:
100 MHz, 2.5 GS/s, 4 channels (Tektronix THS3014 and Tektronix THS3014-TK models).
200 MHz, 5 GS/s, 4 channels (Tektronix THS3024 and Tektronix THS3024-TK models).
Record length: 10k points to the channel. Vertical resolution: 8 pages.
Sensitivity: 2 mV/div to 100 V/div.
All input channels are electrically isolated from each other.
21 automatic measurements, FFT analysis (FFT), mathematical signal processing, cursor measurements, including measurements in Watts, recorder (datalogger) mode.
Areas of use: analog and digital systems, power supplies,
high current electronics, automotive and aviation electronics development and maintenance, industrial electronics development and maintenance, electronics
testing and maintenance in the field.
Possibility of supply up to 7 hours from built-in battery.
Models THS3014-TK and THS3024-TK come with an optional hiking kit.
Interfaces: USB as standard. Weight with battery: 2.2 kg.
Ultra-portable, isolated inputs and self-powered

Out of production. Recommended replacement: Tektronix TPS2000B.

Need an oscilloscope faster and cheaper and isolated inputs? Watch the series Tektronix TPS2000B.
Need an oscilloscope cheaper and without isolated inputs? Watch the series Tektronix TBS2000.
Necessary analyze digital signals? Watch the series Tektronix MSO2000.
Difficult to decide on a model? See helper: How to quickly choose an oscilloscope.
All series of modern oscilloscopes are presented here: Oscilloscopes.

 

DETAILED DESCRIPTION

Every engineer knows that it is very difficult to make accurate and safe measurements on power plants, power electronics and similar systems because they use high voltages and signals that cannot be measured with respect to "Earth" potential. The problem becomes even more complicated when the measured signals reach several kilovolts, or when, by connecting to them, it is possible to create ground loops.

In such complex systems, it is necessary to perform "floating" measurements. To do this, the Tektronix THS3000 series of handheld oscilloscopes contains architectural features that distinguish it from most conventional oscilloscopes: all 4 channels of the oscilloscope are completely isolated from each other and from the body of the instrument. In addition, the power supply output and USB interface are also isolated from the oscilloscope inputs, reducing the risk of accidental grounding or shorted wires. By using the THS3000 Series oscilloscopes with the right probes, you can be sure that your measurements will be fast, safe and accurate.

Four fully isolated channels allow you to measure any type of signal

Taking measurements using cursors helps in determining time intervals

The Tektronix THS3000 Series oscilloscopes automate most of the measurements you make on motor drives, power converters and inverters, power semiconductors, and more. THS3000 oscilloscopes can be used with a variety of probes, including current ones, while automatically taking into account the parameters of the probes, and the corrected and recalculated results are displayed on the screen (for example, when measuring power in Watts). Four isolated channels make it easy to take measurements on 3-phase systems or simultaneously measure control and generation signals in power electronics.

Automatic calculation of instantaneous power by multiplying voltage and current signal

With user-defined limits, signal anomalies can be easily detected

 

Tektronix THS3000 Series Handheld Oscilloscope Specifications

 

Tektronix THS3000 Series Handheld Oscilloscope Package Contents

 

Options and Accessories for Tektronix THS3000 Series Handheld Oscilloscopes