Linear laboratory power supply ITECH IT6834, 150 V, 1.2 A, 180 W

Typical laboratory power supply of the ITECH IT6800 series
ITECH IT6800 series typical laboratory power supply (side view 1)
ITECH IT6800 series typical laboratory power supply (side view 2)
ITECH IT6800 series typical laboratory power supply (side view 3)
ITECH IT6800 series typical laboratory power supply (back view)
ITECH IT6800 series typical laboratory power supply (side view 4)
ITECH IT6800 series typical laboratory power supply (side view 5)
ITECH IT6800 series typical laboratory power supply (side view 6)
Typical laboratory power supply of the ITECH IT6800 series
ITECH IT6800 series typical laboratory power supply (side view 1)
ITECH IT6800 series typical laboratory power supply (side view 2)
ITECH IT6800 series typical laboratory power supply (side view 3)
ITECH IT6800 series typical laboratory power supply (back view)
ITECH IT6800 series typical laboratory power supply (side view 4)
ITECH IT6800 series typical laboratory power supply (side view 5)
ITECH IT6800 series typical laboratory power supply (side view 6)
On order

Product code: 3020008

From 22 554 UAH

Main characteristics

  • Manufacturer:
    ITECH (Taiwan) Official representative
  • Category:
  • Series:
  • Output voltage type:
  • Number of channels (DC):
  • Maximum output voltage (DC):
    150 V
  • Maximum output current (DC):
    1.2 A
  • Maximum output power (DC):
    180 W
  • Voltage resolution (DC):
    10 mV
  • Current resolution (DC):
    10 mA
  • Operating principle:
  • 4-wire sensing:
    No
  • Protection modes:
    Short circuit protection Current protection (OCP) Voltage protection (OVP, UVP) Temperature protection (OTP)
  • Built-in devices:
    Multimeter (DMM)
  • Peculiarities:
  • Connection to computer:
    USB RS-232
  • Operating temperature:
    From 0°С to +40°С
  • Width:
    215 mm
  • Height:
    88 mm
  • Depth:
    355 mm
  • Weight:
    8.5 kg

Product description

ITECH IT6834 is a linear (transformer) single-channel laboratory power supply with an output voltage of up to 150 Volts, a current of up to 1.2 Amperes and a power of up to 180 Watts. The voltage resolution is 10 mV, and the current resolution is 10 mA. Thanks to the linear stabilization method, it provides a clean, ripple-free output voltage.

The laboratory power supply contains an accurate multimeter that measures the actual values of the output current and voltage. If it is necessary to connect to a computer, a replaceable communication module is used, which is located below on this page in the accessories section. Model IT6834 is part of the ITECH IT6800 series.

For more information about this product, see the ITECH IT6800 series page

Contents of delivery

  • linear laboratory power supply ITECH IT6834 (1 pc.)
  • power cable (1 pc.)
  • user manual in electronic form
  • 1 year warranty