Alternating voltage and current source ITECH IT-M7724, 300/600 V, 30/15 A, 3 000 VA

ITECH IT-M7700 series typical laboratory AC power supply
ITECH IT-M7700 series typical laboratory AC power supply (side view 1)
ITECH IT-M7700 series typical laboratory AC power supply (side view 2)
ITECH IT-M7700 series typical laboratory AC power supply (side view 3)
ITECH IT-M7700 series typical laboratory AC power supply (back view)
ITECH IT-M7700 series typical laboratory AC power supply (side view 4)
ITECH IT-M7700 series typical laboratory AC power supply (side view 5)
ITECH IT-M7700 series typical laboratory AC power supply (side view 6)
Power network surges generation with ITECH IT-M7700
Power network dips generation with ITECH IT-M7700
PC software for remote control of ITECH IT-M7700
ITECH IT-M7700 series typical laboratory AC power supply
ITECH IT-M7700 series typical laboratory AC power supply (side view 1)
ITECH IT-M7700 series typical laboratory AC power supply (side view 2)
ITECH IT-M7700 series typical laboratory AC power supply (side view 3)
ITECH IT-M7700 series typical laboratory AC power supply (back view)
ITECH IT-M7700 series typical laboratory AC power supply (side view 4)
ITECH IT-M7700 series typical laboratory AC power supply (side view 5)
ITECH IT-M7700 series typical laboratory AC power supply (side view 6)
Power network surges generation with ITECH IT-M7700
Power network dips generation with ITECH IT-M7700
PC software for remote control of ITECH IT-M7700
Not available Discontinued

Product code: 3020048

Price on request

Main characteristics

  • Manufacturer:
    ITECH (Taiwan) Official representative
  • Category:
  • Series:
  • Output voltage type:
  • Number of phases (AC):
    1
  • Maximum output voltage (AC):
    300 V (RMS), 600 V (RMS)
  • Maximum output current (AC):
    30 A (RMS), 15 A (RMS)
  • Maximum output power (AC):
    3 000 VA
  • Voltage resolution (AC):
    100 mV (RMS)
  • Current resolution (AC):
    10 mA (RMS)
  • Number of channels (DC):
  • Maximum output voltage (DC):
    800 V
  • Maximum output current (DC):
    30 A
  • Maximum output power (DC):
    3 000 W
  • Operating principle:
  • 4-wire sensing:
    Yes
  • Protection modes:
    Short circuit protection, Current protection (OCP), Voltage protection (OVP, UVP), Power protection (OPP), Temperature protection (OTP)
  • Built-in devices:
    Multimeter (DMM), Generator
  • Peculiarities:
  • Connection to computer:
    USB, Ethernet (LAN), GPIB (IEEE-488.2), CAN, RS-232, RS-485
  • Operating temperature:
    From 0°С to +40°С
  • Width:
    680 mm
  • Height:
    88 mm
  • Depth:
    436 mm
  • Weight:
    24 kg

Product description

ITECH IT-M7724 is a compact single-phase AC voltage and current power source. It contains a built-in arbitrary waveform generator, which allows you to generate both pure sinusoidal signals and all kinds of distortions, including harmonics, surges, dips, complex noise, etc. In addition, it is possible to add a constant component to the output voltage (AC + DC mode).

The IT-M7724 AC power source has two voltage ranges (300 and 600 Volts RMS) and two current ranges (30 and 15 Amp RMS) with a maximum apparent power of up to 3 000 VA. The weight of the device is 24 kg with dimensions of 680 x 88 x 436 mm. Remote control can be performed using a free program or using the LabVIEW driver, which can be downloaded below on this page in the Documentation section. Model IT-M7724 is part of the ITECH IT-M7700 series.

For more information about this product, see the ITECH IT-M7700 series page

Contents of delivery

  • single-phase alternating voltage and current source ITECH IT-M7724 (1 pc.)
  • power cable (1 pc.)
  • user manual in electronic form
  • 1 year warranty