Home
/
AMETEK products

AMETEK products

Tehencom company carries out direct deliveries of programmable laboratory and industrial power supplies and electronic loads of the company AMETEK manufactured under the trademarks AMETEK, Sorensen, Elgar, PowerTen, California Instruments, Xantrex. We offer the whole range of AMETEK products, as well as provide service, warranty and post-warranty service.

Headquarters and main production facilities of the corporation AMETEK (www.programmablepower.com) are located in the United States. AMETEK products are characterized by technical innovation and high quality. Today, AMETEK employs more than 11 000 people and has annual sales of $2 500 000 000.

AMETEK products include a wide range of equipment - from small laboratory power supplies to rack-mounted industrial power subsystems. DC power supplies are available in the power range from 30 W to 150 kW. AC power supplies are available in the power range from 800 V*A to 480 kVA. Electronic programmable loads are available in modular and higher power versions.

AMETEK company catalog (Sorensen, Elgar, PowerTen, Xantrex series) (220 pages; 20 MB)

AMETEK company catalog (California Instruments series) (2 pages; 2 MB)

You can order a printed AMETEK catalog from us free of charge. To do this, send us a request to Email.

Below are the most popular models of the company's equipment AMETEK. Regarding prices and delivery times for the entire range of instrumentation, simply call us or write to us at E-mail and we will be happy to answer your questions.

Model	A photo	Short description
DC Laboratory power supplies of the AMETEK company (Sorensen series)
Sorensen XT		Laboratory DC power supplies. Power: 42-60W. Voltage: 7-250V. Current: 0.25-6A. Low noise. Outputs on the front and rear panels. Software control via RS-232, IEEE-488. Recommended replacement: ITECH IT6700H.
Sorensen XEL		Laboratory DC power supplies. Power: 75-180W. Voltage: 15-60V. Current: 1.5-6A. Great for engineering applications. The function of fixing the output voltage and setting the voltage limits. Recommended replacement: ITECH IT6700.
Sorensen XBT		Laboratory DC power supplies. Power: 222W. Voltage: 15-32V. Current: 3-5A. Three separate outputs. High resolution setting (16 bit). Isolated outputs. Control via USB, RS-232 Recommended replacement: Tektronix PWS4000.
Sorensen XPF		Laboratory DC power supplies. Power: 350-840W. Voltage: 35-60 V. Current: 10-20 A. Two separate, isolated outputs. Coarse and fine adjustment knobs. Separate switching on/off of outputs. Recommended replacement: ITECH IT6300B.
Sorensen XHR		Laboratory DC power supplies. Power: 1 kW. Voltage: 7.5 - 600 V. Current: 0 - 1.7 A. Universal power input: 85 - 250 V. Soft switching. Power factor correction. Recommended replacement: ITECH IT6900A.
DC Laboratory power supplies of the AMETEK company (Sorensen series) in rack-mount design
Sorensen DLM 600		DC power supplies. Power: 375-600W. Voltage: 5-300 V. Current: 2-75 A. Low output noise: up to 15 mV peak-to-peak. Software control via Ethernet, RS-232, IEEE-488. Recommended replacement: ITECH IT6700H.
Sorensen XG, XTR		DC power supplies. Power: 670-850W. Voltage: 6-600 V. Current: 1.4-110 A. Very high power per unit volume. Multichannel. Control via Ethernet, USB, RS-232, RS-485, IEEE-488. Recommended replacement: ITECH IT6700H.
Sorensen DCS		DC power supplies. Power: 1–3 kW. Voltage: 8-600 V. Current: 1.7-350 A. High power per unit volume. Low output noise. Control via Ethernet, RS-232, IEEE-488. Recommended replacement: ITECH IT6700H.
Sorensen DHP		DC power supplies. Power: 5–20 kW. Voltage: 5-50 V. Current: 133-3000 A. Modular design. Full set of protections. External trip input. Control via RS-232, IEEE-488. Recommended replacement: ITECH IT6500.
Sorensen SFA		DC power supplies. Power: 5–150 kW. Voltage: 60-160V. Current: 31-2500A. Constant current output mode. Control via Ethernet, RS-232, IEEE-488. Recommended replacement: ITECH IT6500.
AC Laboratory power sources of the AMETEK company (Elgar series) in rack-mount design
Elgar CW		AC power supplies. Power: 800–2500 VA. Voltage: 135-310 V. Current: 2.6-18.6 A. Low distortion and noise. Possibility of parallel synchronous operation. Control via RS-232, IEEE-488. Recommended replacement: ITECH IT7300*.
Elgar SW		AC power supplies. Power: 1750–22200 V * A. Voltage: 156-312 V. Current: 6.5-192 A. Arbitrary output waveform (2 Hz to 6 kHz). Parallel operation (up to 22200 W). Management via IEEE-488. Recommended replacement: ITECH IT7300.
Elgar DMAC II		Powerful AC power supplies. Power: 30–480 kV*A. Voltage: 120-480V. Current: 50-4000A. Low distortion. Flexible modular architecture. High current carrying capacity.
DC and AC Power supplies of the AMETEK company (California Instruments series)
California Instruments Compact i/iX		Combined DC and AC power supplies. Power: 750–2250 V * A. Built-in power analyzer. From 1 to 3 phases. Arbitrary output waveform. Rack installation. Control via RS-232, IEEE-488. Recommended replacement: ITECH IT7300.
California Instruments EC1000S		Combined DC and AC power supplies. Power: 750–1000 V * A. Laboratory execution. Large LCD screen. Flexible control of output signals. Functional software. Control via USB. Recommended replacement: ITECH IT7300.
Modular DC and AC power supplies of the AMETEK company
AMETEK ReFlex Power		Modular DC and AC power supplies. Fully digital, modular solution. DC and AC power supply modules as well as electronic loads. Ability to simultaneously control up to 95 modules in 8 chassis.
Electronic loads of the AMETEK company (Sorensen series)
Sorensen SL		DC and AC electronic load. Power: 75 W - 14.4 kW. Voltage: 60-500V. Current: 1-720A. DC modes: CC, CR, CV, CP. AC modes: CR, CC. Software control via RS-232, IEEE-488. Recommended replacement: ITECH IT8500+.