Portable modular measurement platform (1 slot) Anritsu MT9090A
Product code: 1000337
Add item to cart. Our specialist will coordinate the complete set with you, inform you of the price and terms.
Price on request
MAIN CHARACTERISTICS
Designed for measurements on networks PON FTTx, CWDM and Ethernet.
Lightweight and durable design, no fan. The intuitive user interface makes it easy for technicians of all skill levels to work with the platform.
The platform includes a USB port, has a modular design that allows modules to be replaced in the field, and is optimized for operation in harsh environments.
Built-in power meter and visual flaw detector (option).
11 cm wide screen (480 x 272 resolution). Interfaces: USB.
Internal memory: 8 GB (flash). Battery life: 3.5 hours.
Weight (with battery): 0.8 kg. Dimensions: 19 x 10 x 5 cm.
One slot for a plug-in module.
Modular design of the Anritsu MT9090A Network Master portable platform
Modules Compatible with Anritsu MT9090A Platform
The Anritsu MT9090A platform is compatible with these modules for analyzing telecommunication protocols:
- MU909060A1/A2/A3 - Ethernet tester modules from 10 Mbps to 1 Gbps
The Anritsu MT9090A platform is compatible with these modules for FOCL:
- MU909020A - CWDM optical channel analyzer module
- MU909015B - reflectometer module (37 dB) for PON FTTx / MDU
- MU909014A/B - reflectometer module (32 dB) for active networks
- MU909011A - reflectometer module (7 dB) for PON FTTx (at the subscriber)
10Mbps to 1Gbps Ethernet Tester Modules MU909060A1/A2/A3
Ethernet: 10 Mbps to 1 Gbps.
Ports: Two optical SFPs, two wired RJ-45s, or
one optical SFP and one wired RJ-45.
Test RFC 2544. Ability to work in transparent mode (two ports).
Support
VoIP, IPTV, Stacked VLAN (Q-in-Q), MPLS, IPv4 and IPv6.
Physical layer test: optical power and twisted pair test.
Compatible with Anritsu MT9090A handheld platform.
10Mbps to 1Gbps Ethernet Tester Module Description Anritsu MU909060A1/A2/A3
|
|
CWDM MU909020A optical channel analyzer module for Anritsu MT9090A platform
Wavelengths: 18 ITU-T G.694.2 CWDM channels.
Channel width: 6.5 nm according to ITU-T G.695.
Wavelength measurement error: 1 nm.
Power measurement error: 0.5 dB.
Dynamic Range: -40 dBm to +10 dBm.
A very economical solution for working with
CWDM.
Compatible with Anritsu MT9090A handheld platform.
Description of the CWDM Anritsu MU909020A optical channel analyzer module
|
|
Optical reflectometer modules (37 dB and 32 dB) MU909015B, MU909014A/B
Wavelengths: 1310, 1550 nm (models MU909015B, MU909014B).
Wavelengths: 1625, 1650 nm (models MU909014A).
Dynamic Range: up to 37 dB (model MU909015B).
Dynamic Range: up to 32 dB (models MU909014A, MU909014B).
Dead zone by events: up to 1 m. Attenuation dead zone: up to 5 m.
Number of trace points: up to 125,001. A good solution for testing access networks, including active ones. In one module can be installed: OTDR, loss meter and flaw detector (VFL).
Compatible with Anritsu MT9090A handheld platform.
Description of optical reflectometer modules Anritsu MU909015B, MU909014A/B
|
|
Optical reflectometer module (7 dB) for PON FTTx (at the subscriber) Anritsu MU909011A
Wavelengths: 780, 1550 nm.
Dynamic Range: more than 7 dB. Dead zone by events: up to 1 m.
Attenuation dead zone: up to 5 m. Number of trace points: up to 25,001.
Excellent inexpensive solution for last mile testing.
Ability to test on an active network.
In one module can be installed: OTDR, loss meter and visual flaw detector (VFL).
Compatible with Anritsu MT9090A handheld platform.
Description of optical reflectometer module for PON FTTx Anritsu MU909011A
|
|
Warranty:
1 year. It is possible to extend the warranty period up to 3 years.